Saab 93 Key Fob ReplacementSaab keys can be expensive to change. The procedure is easy.
You will require a phillips screwdriver with a flat head and some patience. Simply place the screwdriver in the middle of the case and slowly work to open it.
In addition, having spare fobs and keys is an excellent idea. They can save you from being stranded or paying towing charges.
How to replace a battery
All car key fobs that can lock and unlock your vehicle remotely have a battery inside that will eventually fail. In just a few easy steps, owners can easily replace the battery of their key fob. The key fob comes with two plastic flaps on one side that you must open in order to remove the battery and replace it with an alternative one. The CR1632 battery that is standard in size can be used to replace. It is easy to install.
After you have removed the emergency key, you can make use of the flathead screwdriver on a small piece of wood to split the case. Do not force the case too hard, as the electronics are delicate and can be damaged by excessive pressure.
Saab created some incredible cars, and many of them are still in use around the world today. One of the biggest problems with these cars is their ignition keys. They're not robust, and the buttons could become sticky or fall out as time passes. If a Saab owner loses their only working key, it can be quite expensive to add an additional one at the dealership, since they must replace the entire computer module, and then program it with the new key to convince the vehicle that you are not trying to take it. You can save a lot by replacing the case.
How do you remove the Manual Key
Batteries are included in all key fobs used in the process of lock and unlock vehicles. They have a limited life. If you're like most people they will go out at some point. Fortunately it's possible to replace the battery for your manual key fob is very easy. The only problem is taking the old one from the case, but that's not something that a little patience and a bit of work using a flathead screwdriver won't assist you with.
After you've installed the new battery, it's time to reassemble the entire thing. To do this, you'll need to remove the key fob case. This can be done by inserting a flathead screwdriver in the slot that is located in the middle of the case. Then, gently work the case until it splits in two and you can remove it from the key fob.
If your previous keyfob has lost its connection with the security system in your vehicle it is possible to reprogram the new one. This can be done by following the manual learning procedure for adding a new FOB to your 2010 Saab 9-5. This method is not a way to make keys previously learned invalid however, so you can use the existing FOBs in case they require reprogramming. This process can only be initiated if the mechanical key of the vehicle matches the cut on the FOB.
How to Resolve the Case
It's a good idea replace both the case as well as the battery whenever you're replacing the manual key or battery. The cases can get worn out quickly, especially after heavy use. Switching the case on your
saab 93 key programming 9-3 can be relatively easy, and you don't even need any special tools to perform the task.
The first step in changing the case is to remove the manual key from the key fob. It is done by pressing the blue
saab 900 key logo on the fob and pulling the manual key out. It could be necessary to use a bit of force in order to remove the manual key from the fob.
After you've removed your manual key, you're able to begin taking the electronic components from the case. You'll need a flathead screwdriver for this. You'll need to be careful not to scratch the electronics inside, so be gentle when using your screwdriver. After you've removed all of the electronics, it's time to remove the battery. Once you've replaced your battery, you can place everything back into the original case. You can purchase
replacement saab 9-3 key cases online for very little.
How to Program the New Key
Key fobs that permit you to lock or unlock your vehicle remotely, are equipped with batteries. However, they have a limited life span. It is important to be aware of that and change the batteries in your key fob at least every 3-4 years. This is an easy task that you can complete at home. All you need is a little patience and an incredibly small screwdriver for phillips screwdrivers.
The first step is to unplug the manual key. Press the blue
saab 9-3 key programming logo and then pull the emergency key from the key fob. The key should pop out using some force. Once you have the key fob open you can take out the old battery by gently pushing the screwdriver into the slot in the middle of the case. The case will be split making it easier for you to access the electronics.
It is now time to program the key. This can be done by following the instructions in this YouTube video by YouTube Cyclone Cyd. This is a great video channel that provides instructions on how to carry out basic maintenance and repair work on vehicles.
Key fobs can be an ideal place to store an extra car key in the event you break or lose your original. You can buy a brand new key fob online or from a local locksmith store, like United Locksmith. It is cheaper than at a dealership, which will charge you for the key and programming it to the car.