Choosing Upvc
window friction hinges Replacement Hinges
Selecting and fitting upvc windows hinges for replacement isn't as difficult as you may think. It is essential to verify that the arrow on the hinges is facing in the correct direction and the thickness (13mm or 17mm) of the hinge arm on the opening frame.
There are many different types of hinges to choose from, each with distinct characteristics. This article will discuss the most popular types of uPVC window hinges and their advantages.
Egress/Easy Clean Hinge
They are a great option to replace or upgrade your fire escape safety window because they can open to a full 90 degree angle. They can be removed to an easy-clean position, allowing you to access the outside of windows without the need to climb ladders or lean over dangerous angles.
Yale is one of the most reputable and well-known brands in the world of home security. They are suitable for all kinds of uPVC side-hung windows. They can be moved to the easy-clean position by pressing a small button and then moving the window sash to one side. After closing, the sash will automatically return to its original position.
They are available in both 13mm and 17mm stack heights. Depending on the size of your existing window we recommend using our Egress Selection Guide to determine which one is the best fit for you.
These
double glazing hinges are designed to be used in conjunction with a standard side-hung frame which is made of aluminum or uPVC. The friction screw is used to adjust the resistance. This allows for easier opening of the window and reduces the risk of an accidental closure in severe winds. They have been tested for more than thirty thousand cycles, and they are compliant with British Standards approved BS EN 130126-6:2008 and BBA/Secured by Design.
Without buttons or catches, There are no buttons or catches. Nico Egress Easy Clean Friction Hinge is easy to use and offers a practical solution to emergency egress as well as safe cleaning. Press the hinge retention clip located in the inner corner of the bottom corner. This will release both the catches on the top and bottom and allow you to move the sash into the easy-cleaning position. Close the
double glazed Window Hinge repair when you have the sash in the easy-cleaning position. This will reset the hinges to their Egress positions.
Fire-Escape Hinge
Fire Escape Hinges (also called "Easy Clean") are used to replace side-opening windows for fire safety reasons. These hinges allow for more space in the event of a fire. The building regulations state that this kind of hinge has to be set in any space that is habitable and has a window.
They have a unique friction stay that allows the window to be opened to 90 degrees and also allows the opening sash to slide across when open to allow easy cleaning of the exterior side of the glass, without having to use ladders. The hinges aren't flimsy buttons or catches and are operated by a simple, safe lever that can be accessed from the inside of your home.
The hinges are produced in the UK by Cotswold and come with a child safety restrictor for use throughout the day that can be reverted with a hidden button providing you with peace of mind that your children will not accidentally open the door too far. They are available in 13mm and 17mm stack heights.
To order these hinges simply measure the length of your existing side-hung window hinge which attaches to the frame (see the article on measuring the length of your
window hinges made of upvc). Choose the proper size hinge below.
It is important to note that the measurement is taken from the part that is fixed to the frame not the sash, the actual hinge length could be shorter or longer based on the manufacturing process of your old windows. Also, when selecting the size of your hinge, most windows made of upvc will have 13mm stack height, however should your window frame have 17mm then choose the option that fits this. You can also use the 4mm packer to compensate for the difference. All hinges come in two different directions (1 left and one right). The hinges do not include screws. They can be purchased separately if you require. We recommend using our
upvc window hinge repair screws. These are specially designed to enhance the performance of your hinges and allow them to function smoothly for a longer time. They feature a design with reduced friction and an enhanced weather seal with caps made of nylon.
Restricted Hinge
Standard hinges can make it difficult to open windows fully. These restricted child safety friction hinges help to overcome this issue and are a great solution when ventilation is needed but access to clean up or escape in the case of fire is not feasible. They function by limiting the amount of sash that can open and allowing the control of this limitation with the push of a button. They are available in 13mm or 17mm stack heights. They can be used to open top and side-hung windows.
The Nico Restricted Egress Hinges combine the features of both a standard restrictor and a fire escape pivot to provide a simple but efficient way to meet building regulations. It is suitable for side-hung and top opening uPVC windows and is available in 17mm and 13mm stack heights. It is offered as a pair of hinges where one hinge is restricted egress, the other unrestricted allowing one of these to be placed on the bottom of the sash while the other is attached to the top.
These uPVC restricting hinges have been tested to BS6375 part 2. They are intended to be used on windows that cannot be fully opened such as a small children's bedroom. The mechanism restricts the distance the sash can open to an appropriate height of 100mm and then re-engages when the window is shut.
These uPVC friction-style hinges can be used with all types of windows. They are particularly useful for windows that are hard to reach, such as those in three-storey homes or ones that require ladders. They can be combined by our security enhancements such as hinge guards, protection plates for hinges or dog bolts to offer PAS 24 performance.
When replacing a window hinge it is crucial to determine the length of the existing hinge so that you can get replacements that are comparable in size. The easiest way to do this is by viewing the hinge in the image gallery and determining the best place for it to be placed. Top-hung hinges are limited to both sides and side-hung hinges are only restricted to one side.
Standard Hinge
A standard hinge uses metal-to-metal contact, and there are no additional parts to decrease friction. It is available in a variety of finishes and fire-rated. To determine the radius of your hinge, lay it flat and line up a dime and quarter in two corners. If the quarter fits better then the corner should be round to 5/8 inches.
Choosing the right type of hinge can make or break the appearance of your door. Matching the style and design of your hinges with your door will give it an attractive and well-integrated appearance.