How to Replace the Replacement Key Battery For the Saab 9-3
saab 9-3 key programming owners must follow a set of specific steps to add an additional ignition key. This requires the use of a handheld computer, known as Tech-2 which is used by the dealer. Then a new key and transponder are required to be purchased and programmed to the car.
It is recommended to rotate your keys in order that one doesn't get worn out more quickly than the other. This will help to keep your keys in perfect condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They have electronics that make them difficult to duplicate. That has made car theft much more difficult than it was a few years ago. It also makes it more expensive to replace keys lost.
Every owner of a Saab 9-3 needs to have at a minimum two functioning keys. If one is lost it is expensive to purchase a new one for the car, as it requires replacing the CIM module, and then reprogramming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are a few ways to avoid these expensive. Some parts providers will look up the code from an extra key (usually the same one that opens the doors and turns off the ignition) and cut a brand new key blade from metal for just a fraction of dealer cost. The key must be exactly the same as the original in order for it to work in your vehicle.
Follow these steps to replace the case. You will need a flathead screwdriver as well as some patience. Utilizing the screwdriver, slowly pry the plastic apart and separate the emergency key from the case. Once the case is open, remove the electronics and put them back into the new case. Be sure to put the correct key and badge back in the case too.
Replacement Battery
The
Saab 9-3 key Replacement 9-3 replacement battery is a budget component that can be quickly and easily replaced. The YouTube video of Cyclone Cyd shows how to replace the remote fob battery in only four steps. This tutorial can be used for any modern
saab 93 key key fob however the procedure might differ slightly.
The first step is to locate the button that will release the backup key within the fob. It's usually next to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver in the small hole on this button. This should be enough to let the fob case open so that you can replace the battery.
Once the new CR1632 battery is installed, you can reassemble the remote key fob. You can then program it to your car. The whole process should not be more than an hour. It's a simple process that doesn't require any special tools.
If you lose a key, the process will be a bit more involved however it can be completed. The dealer must first read the VIN of the vehicle and order an alternative TWICE module, as well as a key blade with the correct unique code. Then, they'll need to cut the replacement key and then program it using a brand new tool for programming called MDI.
Key Replacement Fob
The key fob is a device that locks and unlocks your car, it's got a battery inside. Batteries have a finite lifespan and eventually die. This is a typical issue that happens to all cars and the good thing is that you can change the batteries on most key fobs without replacing the whole case. Amazon sells replacement fobs that have all the electronic components installed. It is easy to open the case and replace the batteries. It is necessary to remove the emergency key before you can replace the batteries. To accomplish this, simply insert an small screwdriver with a flat head into the slot in the middle of the. Work the screwdriver around the case, and it will split open, making it easy to remove.
If you're looking to replace your keys, make sure you have an extra set on hand. This will save you a significant amount of money. If you have a spare, you can have the dealer cut a new key and program it to your car, which is much cheaper than replacing the whole key fob.
It is possible to add a second key to your car in the event that you don't have one, but it takes lots of research and work. A second key can cost several hundred dollars and also requires programming of the car's computer. This can be accomplished by a professional, however it is an expensive option for the majority of owners.
Replacement Ignition
As opposed to the earlier Saab cars, the modern
saab 9-3 key fob replacement 9-3 models use an upgraded alarm system that is dependent on a coded keys. If you lose only one key, it can be costly to purchase a new one because the car must have a special computer added and also be programmed to accept a new key. Most locksmiths can't do this and dealers will charge hundred dollars just to program the new key!
Dealers will charge you a high price to replace your car computer (also known as the CIM or SAAB twice) in the event that you lose your only functioning key. Instead, we can reprogram the EEPROM of your current car computer, preparing it for a new key, saving you over 50% of the price you spend at a dealer.
If you've been a long time owner of a 03-11 SAAB 9-3, then you probably have noticed that the ignition switch isn't really all that durable. They can get extremely sticky and the buttons can be ripped off at times, so you should consider buying a new one if the one you have isn't performing as it should. Fortunately, replacing the ignition key isn't as complicated as it seems and can be done in a short time with the right tools.