How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners have a unique set of steps to take to add the second key. This requires a handheld computer, called Tech-2 that is operated by the dealer. Then a new car key and transponder are required to be purchased and then programmed to the car.
Rotate your keys to prevent one from wearing out more than the other. This will keep your keys in pristine condition.
Replacement Case
The new key fobs are not like the older Saab keys. They're equipped with electronic devices that make them difficult to copy. This has made theft of cars significantly more difficult than 20 years ago. It also makes it more expensive to replace lost keys.
saab key fob programming 9-3 owners should have two keys working. If one of them is
Lost Saab Keys, it costs a lot of money to add another to the car because it involves replacing the CIM module and programming the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are ways to cut down on these costs. Some parts providers will use the code of a spare key to cut a new metal blade for a fraction of what the dealer charges. The key, however, must be the same as the original to work correctly within your car.
You can also replace the case yourself by following these steps. You'll need an flathead screwdriver and patience. With the screwdriver you can pull away the plastic and take out the emergency key. Once the case is open, remove the electronics and put them in the new case. Place the key with the correct badge into the case.
Replacement Battery
The Saab 9-3 replacement battery is a cheap component that can be quickly and easily replaced. This YouTube video from Cyclone Cyd demonstrates the procedure for replacing the battery of the remote fob with just four simple steps. This tutorial will work with any modern Saab key fob. However, the procedure might differ slightly.
The first step is to locate the button that releases the backup key inside the fob. It's usually close to the
saab 93 key programming logo on the back of the fob. Then, use the flathead screwdriver to insert into the small hole in this button. This should be enough to allow you to open the fob case so that you can replace the battery.
After the new battery CR1632 is installed then you can reassemble your remote key fob. You can then program it to your car. The entire process should not take more than an hour. It is a very simple procedure that doesn't require any special equipment.
If you lose a key the process is more complicated, but it can still be accomplished. The dealer must first read the VIN of the vehicle and then order an additional TWICE module and key blade that is matched to the unique code. After that, they'll have to cut the replacement key and then program it with a brand new tool for programming called MDI.
Replacement Key Fob
The key fob is the piece that locks and unlocks your car, it has batteries inside. They have a limited life span and will eventually fail. It's a common issue for all vehicles. The good thing is that you can replace the battery in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that already have all the electronic components in place. It is easy to open the case and replace the batteries. You'll need to remove the emergency key before you can replace the batteries. To accomplish this, simply insert an small screwdriver with a flat head into the slot in the middle of the. The case will split once you work the screwdriver all around it.
If you're about to replace the keys, make sure you have spare keys, because this can cut down your total cost by a significant amount. If you do have a spare, you can have the dealer cut a new key and program it to your car, which is much cheaper than replacing the entire key fob.
If you don't have a spare you can add a second key to your car, however this requires a lot research and effort. It costs a few hundred dollars to add an additional car key. The computer in the vehicle must also be programmed. This can be done by a professional, however it's a costly choice for the majority of owners.
Replacement Ignition
The current SAAB 9-3 has an advanced alarm system built around a key code. If you lose your sole key, it could be costly to replace it with another one since the car must be equipped with a specific computer and be programmed to accept a new key. Locksmiths typically aren't able to program this and even a dealer will charge several hundreds of dollars just to program the new key!
Dealers will charge you a high price to replace your car computer (also known as the CIM or SAAB twice) If you lose your sole working key. Instead we can reprogramme the EEPROM in your current car computer to prepare it for a new key, saving you over 50% of what you'll spend at a dealer.
If you've been an owner of a 03-11
saab 9-3 key 9-3, you probably are aware that the ignition key isn't really all that durable. They can be extremely sticky and the buttons can fall off of them every now and then and you should think about buying a new one if the one you have isn't performing as it should. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be accomplished quickly.