How to Replace the Replacement Key Battery For the Saab 9-3
Saab owners must follow a set of unique steps to add an additional ignition key. This requires the use of a handheld computer called Tech-2 that is operated by the dealer. A new key and transponder must be purchased and then programmed to the car.
Rotate your keys to prevent one from wearing out quicker than the other. This will also help to keep your keys in pristine condition.
Replacement Case
The new key fobs do not look like the old Saab keys. They have electronics that make it difficult to copy. This has made theft of cars significantly more difficult than it was a few years ago. It has also made it more expensive to replace lost keys.
Every owner of a 9-3
saab 93 replacement key should have at least two functioning keys. If one is lost, it is expensive to replace it in the
car key Shop because it involves replacing the CIM module and reprogramming the locking cylinders. Dealers charge between $100-$200 for this.
There are several ways to get around these high cost. Some parts dealers will use the code of the spare key to cut a brand new metal blade for a fraction of the price of the dealer. The key must, however, be the same as the original to work correctly in your vehicle.
You can also change the case yourself by following these steps. You'll need a flathead screwdriver as well as some patience. With the screwdriver slowly pull the plastic apart and then separate the emergency key from the case. Once the case has been opened take out all electronic components and place them in your new case. Put the correct key and badge inside the case.
Replacement Battery
The Saab 9-3 replacement battery is a budget part that can be quickly and easily replaced. This YouTube video by Cyclone Cyd demonstrates how you can replace the battery for the remote fob in just four steps. This tutorial is compatible with any modern
Saab key fob. However, the process might differ slightly.
The button is typically located just below the
saab replacement key logo on the back of the fob. It's usually just below the Saab logo on the back of the fob. Then use an screwdriver with a flat head to insert into the small hole in this button. This should be enough to open the fob's case so that you can replace the battery.
Once you have installed the batteries CR1632, you can rebuild the remote key fob. Then, you can program it into your car. The whole process should not exceed an hour. This is a straightforward process that doesn't require any special tools.
If you lose a key the process will be a bit more involved but it is still able to be completed. The dealer must read the car's VIN and then purchase a replacement key blade and TWICE module that has the correct unique code. After that, they'll be required to cut the replacement key and then program it with an innovative software tool called MDI.
Replacement Key Fob
The key fob comes with an internal battery that is used to lock and unlock your vehicle. Batteries have a finite lifespan and eventually die. This is a regular issue that affects all cars and the good thing is that you can replace the batteries in many fobs, without replacing the whole case. Amazon sells fobs for replacement that already have all the electronics in place. It is easy to remove the case and replace the batteries. It is important to keep in mind that you'll need remove the emergency key first. you can accomplish this by inserting the screwdriver of a small flathead into the slot found in the middle of the case. Move the screwdriver around the case until it will split open, making it simple to remove.
If you're ready to replace your keys, keep an extra set on hand. This will save you a significant amount of money. If you have spare keys, you can ask the dealer cut an entirely new key and then program it into your car, which is much cheaper than replacing the whole key fob.
If you don't have a spare car key, you can add a second key to your car, however this will require a lot of research and effort. Adding a second key costs around a hundred dollars and also requires programming of the car's computer. Professionals can do this but it's not a cheap option.
Replacement Ignition
As opposed to the earlier
saab ignition key cars, the modern SAAB 9-3 models feature an upgraded alarm system that is based on a coded key. This means that if you lose your only working key, adding another one can be very expensive since the car has to have a unique computer module installed and it also needs to be specifically programmed to accept an extra key. Dealers can charge hundreds of dollars to program a new key when they are not able to do it.
Dealers will charge you the highest price to replace your car's computer (also called the CIM or SAAB twice) If you lose your only working key. We can reprogram the current EEPROM in your car computer so that it's ready for an extra key. This will save you more than 50% of the price you'd pay a dealer.
If you have owned a 9-3 from SAAB for a long time you're aware that the ignition keys are not very durable. They can get extremely sticky and the buttons can be removed from them every now and then, so you should consider purchasing a new one if yours isn't performing as it should. It's not as difficult as it seems to replace the ignition key. With the proper tools, it can be accomplished in a short time.