How to Unstick a
Suzuki Ignis Key
suzuki grand vitara key replacement's funky, affordable city
car key copy Cost receives a midlife refresh. It's not a supercar, however it does eat up roads in rural and urban areas with aplomb, and its nifty turning circle makes city driving effortless.
The new model also comes with smart safety and driver assistance technology such as lane departure warning and a drowsiness alert that's a welcome addition on long drives.
Steering Lock
The steering lock is a crucial security feature to prevent your Ignis from being stolen when it's in drive. It's a vital safety measure however it can be a pain when you have to get to a location and you are unable to unlock the wheel. There are fortunately, a few easy things you can try to resolve the issue.
Check first that the ignition switch is set to "on". If it is, then try to turn the key in the direction you turned before the wheel became locked. This can be a little tricky however it's usually enough to unlock the wheel.
If the wheel is still unable to unlock, you can spray a tiny amount of canned air into the ignition cylinder to lubricate it. Just be sure to put on eye protection before doing this so that you do not get any canned air in your eyes! You can also make use of liquid graphite to lubricate your piston.
If none of these options work, you'll need to replace the ignition lock assembly. This component is easy to find in any auto parts store. Make sure to purchase the exact replacement and compare it with your old one before you attempt to install it. Also, be sure to remove the cover covering the ignition so that you can inspect the assembly.
Worn
The steering lock could bind the ignition switch, causing the key to be stuck. This is a safety feature that prevents your Ignis from moving away while the engine is running. If this occurs you can release the steering wheel by manipulating it.
In time, your Ignis key can start to wear out and become more difficult to turn. This may not be as common as a defective ignition switch, but it does happen. If this is the case, it is recommended to replace your key.
You should also check to check if there's something that is blocking your Ignis key from entering the ignition cylinder. There may be debris or dirt that could get stuck in the ignition cylinder, preventing it from turning.
You can also test a little lubricant to see if it helps. There are a myriad of types of lubricant available to purchase, so take a look around your garage or go to an auto parts shop in your area to find one that can work.
A silicon "glow-in-the-dark" key cover is a different option. These covers absorb light and release it in dark or murky conditions. They also protect your key from wear and tear. They are available on many Suzuki models and are available online or at an
suzuki key replacement dealership near you.
Bent
A key may become bent over time. This can cause the teeth on the key to not be able to engage with the lock cylinder in the same way and stop the key from turning in the ignition. In this situation it is necessary to replace the key. It is a good plan to duplicate the spare key and keep it in a safe place.
Another possibility is that the ignition cylinder itself may wear out. The lock pins within the cylinder could become stuck together and prevent the key from moving completely into or out of the cylinder. This can be fixed by replacing the cylinder, however, it is recommended to replace the cylinder prior to the key gets stuck in the ignition.
If your key from Ignis is stuck despite trying the easiest fixes it could be time to try lubricating your cylinder. Graphite powder or liquid graphite can assist in allowing the lock pins to move more freely and unbind your key. You can buy it in most auto parts stores. When applying the lubricant, make sure that your Ignis remains in park and do not attempt to manhandle it to unbind it. This could cause more serious problems.
Broken
If you have tried all the easy ways to make keys unstick but it doesn't move, the final option is to apply fluid to get it moving. You can buy this lubricant at a local auto parts store and apply it with the help of a cotton swab or rag to the inside of the lock cylinder. Try again. Move the key backwards and forwards gently to spread the lubricant. If you are able to push it forward, do it, but be careful not to push too hard or you'll break it off in the cylinder.
It's also possible that the circuitry inside the key will become unresponsive over time. It's not as common as it sounds, so you'll need to create a duplicate key.
The case of your
suzuki smart key keyfob might also become damaged or worn. This is especially true if you are using an inexpensive replica key fob, which has a plastic or rubber shell. Depending on the situation, The Key Crew can sometimes migrate the internal circuitry of the old key fob to the shell of a new case, saving you from having to pay for an entirely new key fob. We'll let you know the possibility for your particular situation when we call you to schedule the service.