Repairs to uPVC Windows
uPVC is a great option for modern homes. They are easy to maintain, durable and long-lasting. As opposed to aluminium and timber they are not susceptible to rust or rot.
Cleaning and lubricating regularly UPVC windows and doors is crucial. This will help prevent unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a huge deal of damage to your home, making it very dangerous and potentially fatal. It is crucial to take the time to make sure that you're doing everything you can to ensure that your windows are in good repair.
For single pane windows it can be relatively simple to replace windows, and the new one will generally fit within the frame of the previous one easily. If you have
double glazed window repairs near me-paned windows which are joined by internal beading, it is harder to remove and replace the old panes. In this instance you'll need to source some plastic spacers that assist the new pane to fit perfectly into the window frame.
If you are going to try to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and eye protection. You should also lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled.
Once the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional comes out and fix the window. It also acts as a barrier, deterring any intruders from gaining entry into your home. If the gap is particularly large, you may be interested in an alarm door that comes with an integrated window, since it offers the best of both worlds.
2. Sagging
Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber sash windows. Over time, they can develop a number of problems, including sagging. A sagging uPVC windows can cause problems with light, draughts and even security. If you find that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from worsening.
Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows to reach the frame. Then, remove both the top and bottom hinges with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've repositioned your hinges. If you're satisfied with the fit, you can tighten the screws to ensure that they remain in the right place.
If you are unable to reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity over time, leading them to loose their elasticity. It is important to replace your seal as soon as you can in order to keep your
upvc window repair window watertight and draughtproof.
UPVC handles can also become loose. The majority of the time, this is caused by screws that have become loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively simple to repair a loose uPVC handle. The first step is to close the window and perform an initial test to ensure that it fits. The corners of the sash must be aligned with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and reverse the mechanism back into position.
3. Water Leaks
If you wake up to wet floors and mouldy walls each time it rains it's important to take action. The leaks of water through windows could cause structural damage to your home and impact your ability to regulate the temperature in your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a simple fix that can be done by any DIYer who is competent. Based on the severity of the issue the old caulking may require removal before a new layer is applied. It is important to remember that when it is about
uPVC window repairs you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.
Verify that the drainage holes have no debris inside them and ensure that the sill pan has been angled correctly to drain away from the window. In more extreme cases, you may need to replace the window.
Mold spots and rotten sills are other signs of water leakage. The fungus thrives in damp conditions and is able to quickly spread throughout the house.
If the leakage is occurring between the
double glazed window repairs-
double glazed window repairs glass, it is more likely that the issue is with the seal than the frame. A uPVC specialist can fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and open in a breeze It could be hinges at the fault. Any competent DIYer can replace hinges in just a few minutes.
Like all mechanical parts hinges are prone to be damaged over time. The process of replacing a hinge on a window is essentially a very simple process but it can be simpler when you have a person to help hold the frame up.
It is also important to verify that the uPVC hinges are opening and closed in the correct direction. Check for the arrows on each hinge to determine which way the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window a certain way or by poor installation at the factory. Sending us photos via our website will often resolve the problem. We are happy to offer advice.
Regularly lubricating the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We recommend using a solvent-free lubricant such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the possibility of sticking. This should be done at least every year. WD40 and other solvent-based lubricants are not recommended as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by different factors. First, the hinges because of wear and tear, can become misaligned, this can cause an opening to appear where the sash joins the frame. If they're beyond repair, it might be necessary to have them realigned. Second, the interlock can also become unbalanced. This is located on the hinge's side, and could require to be cleaned. In some instances, it may be necessary to replace these.
The seals may wear out or become damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of
upvc window repairs with low-emissivity glass. This will help to regulate indoor temperatures and lessen draughts.
One of the most effective ways to cut down on drafts is to use a draught excluder, these are typically fabric tubes filled with some sort of filler and can be placed on the windowsill on top. These will help to stop cold air from entering and keep your home warm and cozy!
Your upvc windows can remain a great source of insulation and security to your home with regular maintenance and repairs. However, it is important to realize that all windows have a life span and there may come an point at which it is more economical to replace them than fix them. If you encounter any issues with your Upvc window you should consult an expert as soon as possible.