How to Replace the Replacement Key Battery For the
saab key fob repair 9-3
Saab owners must follow a set of special steps to install an additional ignition key. This requires the use of a handheld computer called Tech-2, to be used by the dealer. Then a new key and transponder are required to be purchased and then programmed into the car.
Make sure to rotate your keys in order to prevent one from wearing out quicker than the next. This will also keep your keys in pristine condition.
Replacement Case
The new key fobs are not like the old
saab 93 key keys. They feature electronic components which make it hard to copy. That has made car theft a lot more difficult than it was a few years ago. However, it has made replacing lost keys a much more expensive task.
Every owner of a Saab 9-3 needs to have at least two working keys. It costs a fortune to replace a lost key as it requires replacing the CIM module, as well as changing the locking cylinders. Dealers typically charge between $100 and $200 to complete this.
There are ways to reduce the high price. Certain parts suppliers will utilize the code of the spare key to cut a new metal blade for less than that of a dealer. The key, however, must be the same as the original one in order to function within your car.
Follow these steps to replace the case. You'll require a flathead screwdriver and some patience. Utilizing the screwdriver, slowly tear the plastic away and remove the emergency key from the case. Once the case is open remove all electronics and put them in the new case. Place the key with the correct badge into the case.
Replacement Battery
The replacement battery for the
saab replacement keys 9-3 is an inexpensive part that can be replaced quickly and easily. This YouTube video from Cyclone Cyd demonstrates how you can replace the battery for the remote fob in just four easy steps. This tutorial should work with any modern Saab key fob. However, the process might differ slightly.
The button is normally located next to the
saab 9-5 key replacement logo on the back of the fob. It is usually located next to the Saab logo on the back of the fob. Use a flathead screwdriver to insert the screwdriver into the tiny hole on this button. This should be sufficient to allow you to open the fob case so that you can replace the battery.
After you have installed the new battery CR1632, you are able to rebuild the remote key fob. You can then program it into your car. The whole process should take more than an hour or less. It's a simple process that doesn't require any special tools.
If you lose a key, the process will be more complicated however, it can be done. The dealer will first need to read the VIN of the vehicle before requesting the replacement TWICE module as well as key blade that has the correct unique code. After that, they'll have to cut the new key and then program it using an innovative software tool called MDI.
Replacement Key Fob
The key fob is the device that locks and unlocks your car. It is equipped with a battery within. The batteries have a lifespan and will eventually die. It is a common problem that affects all cars. The good news is that you can replace the battery in most key fobs, without having to replace the entire case. Amazon sells replacement fobs that already have all the electronic components installed. It is easy to pop the case open and replace the batteries. You will need to remove the emergency key before you can replace the batteries. To do this, you need to insert a small screwdriver that is flat into the slot that is in the middle. Use the screwdriver to move around the case until it will split open, making it easy to remove.
If you're about to replace your keys, make sure you have spare keys, as this will reduce your total cost by a substantial amount. If you have an additional key, you can ask the dealer to cut it and program it for your car. This is much cheaper than buying a new key fob.
It is possible to add another key to your vehicle even if you don't have one, but it requires lots of research and effort. It costs a few hundred dollars to add a second car key. The computer of the vehicle must also be programmed. This can be accomplished by a professional, however it's a costly choice for the majority of owners.
Replacement Ignition
The current SAAB 9-3 features a more sophisticated alarm system built around a key code. If you lose your sole key, it could be costly to replace it with another one, as the car has to have a special computer added and also be programmed to accept a brand new key. Most locksmiths can't do this and even dealers will charge hundreds of dollars just to program the new key!
If you've lost the only working key, a dealer will replace your car's computer (known as the CIM or SAAB TWICE) in order to make the replacement, and will charge you a premium price for it. Instead, we can reprogram the EEPROM on your existing car computer to allow it to be programmed for an additional key, and save you over 50% of the price you spend at a dealer.
If you have owned a
Saab 9-3 key Replacement 9-3 for an extended period of time, you know that the ignition keys are not very durable. They can become extremely sticky and the buttons are known to fall off of them from time to time, so you should consider getting a replacement if yours isn't performing as it should. It's not as difficult as it appears to replace the ignition key. With the proper tools, it can be accomplished quickly.