Wood Burning Stoves Near Me
Wood stoves are a low-carbon renewable source of heat that can reduce energy costs. They also help to support active woodland management, which benefits wildlife.
However, if they aren't properly maintained and installed, they can produce carbon monoxide that poses health risks to the family. To prevent this, look for an EPA-certified wood stove with modern technology to ensure safety.
Catalytic Stoves
A catalytic stove is outfitted with a special honeycomb-like catalyst which converts the smoke from wood into carbon dioxide and water. This is a fantastic option for anyone looking to reduce the air pollution in their homes while saving money. They consume less fuel, burn more hot and produce less creosote. They can be more costly to operate than non catalytic models, and
913875 require regular maintenance on the combustion chamber.
Wood Stoves that have been certified by the EPA
The EPA requires wood stoves to be constructed according to certain guidelines that reduce their emissions. The guidelines stipulate that a catalytic wood stove must be tested at a level that is not more than 7.5 grams of smoke per hour. This is in contrast to 4.1 g/hr for a non-catalytic stove. It is important to keep in mind that lower emission ratings do not necessarily mean greater heating efficiency.
Sizing and 913875.xyz [
913875.Xyz] Selection
It is crucial that your wood stove is built appropriately for the space in which it will be put in. A stove that is not properly sized will not perform as intended and could even overheat. Proper stove size increases the amount of heat produced and lowers emissions. The brochure buying an EPA-certified Wood Stove (PDF 530K) offers a straightforward method of sizing and selecting the best wood stove.
Non-Catalytic and
Www.913875.Xyz Catalytic stoves
The first wood stove produced was an uncatalytic stove. These stoves are also known as traditional wood-burning stoves or open fire stoves. The non-catalytic stove has the advantage that it does not require an additional combustion to reduce emissions. Smoke is the primary source of wasted energy. The smoke that is produced by wood stoves that are not catalytic contain a heavy residue called creosote which is a very toxic substance. The introduction of the catalytic wood stove has eliminated these issues. The catalytic stove uses a catalyst that burns the gases in the smoke to remove the toxic creosote.
Although the catalytic wood stove was designed as a means to reduce the emission of toxic gases, it is not as efficient as the secondary burn system found in the non-catalytic stove. The catalyst is unable to completely burn the byproducts produced by burning wood, and consequently produces some unhealthy fumes. In addition the honeycomb structure the catalyst may break down over time. This can lead to a decline in performance and the need for replacement.
Cleaning the Combustion Chamber Clean
A catalytic combustor working properly will appear as a grayish powder. It should be free of ash, soot or tatty material that can clog the catalytic surfaces and decrease their surface area. The combustor should not be subjected to impingement of flames. This can happen when a powerful, fast draft pulls flames directly into a catalytic convertor. This could also happen if the firebox door or ash pan's door is left open.
It is crucial to examine the catalytic combustion chamber regularly for physical damage or
913875 a need to replace. If the catalytic combustor is damaged or requires to be replaced, it must be done as quickly as is feasible for optimal performance.