Making Your Own Replacement Key For
saab car keys 93 Viggen
Saab owners who have lost a key to their vehicle may be worried about the expense and inconvenience of adding the new key. You can save these expenses by making your key fob yourself.
You'll need a flathead phillips screwdriver to do this. Put the flathead screwdriver into the slot that is located in the middle of the case and then slowly open it.
Cost
Most SAABs come with two keys when they are new, but some used vehicles only have one. In this case, the owner will have to purchase an additional key. This can be costly. However, there are plenty of ways to save money on this process. For instance, if you only require a new key fob case you can save money by purchasing used cases from a dealership. But, be aware that these cases don't contain the badge or emergency key and are prone to wear out quickly.
You also have to pay for installation and programming the TWICE module. These costs can quickly mount up, especially if there is no spare key.
In this regard, it is vital to have two keys for your car. In this way, if you lose the only working key you won't be left without a means of transportation.
The good news is that adding an additional key to your Saab 9-3 isn't so difficult as it could appear. The only issue is that you have to connect the key to the car's computer. This can be done through a dealer, but it might take a while to arrange an appointment. Luckily, you can locate the information you require on the internet to aid you in the procedure.
Installation
Most Saab vehicles manufactured after 1995 come with an immobilizer device that uses a key fob to control the engine. This system also controls the remote and door locks for the vehicle. It is essential to keep a spare key on hand to ensure that you don't lose the original and causing your car to be stolen. The positive side is that if you lose your primary working Saab key, there are ways to replace it without having to pay an expensive dealer service.
It is necessary to prepare the new keyfob. You can do this by using an flathead screwdriver to open the case open. You just need to insert the screwdriver into a small slot in the middle of the case and gently work it. If you're having trouble, try using different angles. Once you've opened up the case, remove the electronics and place them in a new fob case.
Once you have the replacement fob as well as the key, you are able to begin the programming process. You will need to hook up your Tech2 and follow the steps for the NG 9-3 (with or without keys). It is recommended to purchase a replacement device TWICE, which is fitted with the correct key and transponder. You can locate such a unit online however, make sure that the replacement is an OEM part.
Programming
A Tech 2 is required to add an additional key to a Saab 9-3. It also requires programming the vehicle to recognize the new key. This process is more complex than simply copying the metal key and must be carried out by a professional in order to prevent damage to the vehicle's electronic system. If you're thinking of adding an extra key to your car, you should try to do it as quickly as you can. If you wait it could cost you a lot more in future.
In addition to adding the replacement key, you'll need to replace the CIM or TWICE module. It's a postal process and is not something you can get through an aftermarket retailer. Based on the model of your car it could cost quite expensive.
There's an alternative to the dealer that is charging you the highest dollar to replace your car computer. S.A. Locksmith & Security can re-program the embedded memory in your Saab computer and prepare the vehicle for the new key, saving you the expense of a brand new car computer! This service is quick, simple and inexpensive. It can save you up to 50% or more when compared to what a dealer would charge you! This is a great option for people who have lost their car keys.
Remotes
The
saab keys 9-3 Viggen was one of the most distinctive vehicles to ever bear the
saab 93 Replacement key badge. It was an Scandinavian, front-drive, fighter jet-inspired monster that was fast as hell and fun to drive. There were many other Saab models followed, but few were as original.
It's important that you replace your
saab keys replacement 9-3's key fob as soon as you lose it.
saab 93 key replacement vehicles come with an immobilizer system, which requires a unique key for starting. The replacement process is fairly straightforward if you have a spare key, but it can be expensive and lengthy if you don't have an extra.
You can save money if you purchase an old key fob replacement and then have it programmed locally by locksmiths. You should be cautious when purchasing used keys from eBay and other online outlets. They may not be authentic and you could end up paying more at the end.
Removing the electronics and battery from the old key fob is a straightforward process that anyone can do using a screwdriver with a small flathead. Be careful not to cause damage to the small electronic components in the case. It is also recommended to be cautious about pouring liquids onto the inside of the case, as it may cause damage. Also, do not purchase a duplicate key from any retailer that sells aftermarket keys as they may not be paired with the CIM of your vehicle.