How to Replace the Replacement Key Battery For the
saab fob key replacement car keys (
blom-duelund.thoughtlanes.net) 9-3
saab spare key owners have to follow a series of unique steps to add an additional ignition key. This requires a handheld computer, called Tech-2, to be used by the dealer. Then the transponder must be replaced and a key have to be purchased.
Change your keys regularly to prevent one from deteriorating faster than the other. This will help to keep your keys in top condition.
Replacement Case
As opposed to the traditional Saab keys of the past keys, the modern key fobs have electronics inside which makes it hard to duplicate. This has made car theft much more difficult than twenty years ago. However, it has also made the replacement of lost keys a more expensive task.
Saab 9-3 owners should have two keys that work. If one gets lost, it costs a lot of money to get another one for the car because it involves replacing the CIM module and re-programming the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are ways to reduce these costly. Some parts retailers can look up the code on an extra key (usually the same one that opens the doors and turns the ignition) and cut a brand new metal key blade at just a fraction of dealer cost. The key must be the exact same as the original to allow it to work in your vehicle.
You can also replace the case yourself by following these steps. You'll require an flathead screwdriver and patience. With the screwdriver slowly break the plastic and then separate the emergency key from the case. Once you have the case opened, take out the electronics and place them inside your new case. Make sure you insert the correct key and badge back inside the case, too.
Replacement Battery
The Saab 9-3 replacement battery is an inexpensive part that can be easily and quickly replaced. This YouTube video from Cyclone Cyd shows how to replace the remote fob battery in just four steps. This tutorial is compatible with any modern
Saab key fob. However, the procedure may differ slightly.
This button is usually located next to the Saab logo on the back of the fob. It is usually located close to the
saab 93 key programming logo on the back of the fob. Use a flathead to insert the screwdriver through the small hole in this button. This should be sufficient to let the fob case open to allow you to change the battery.
Once you have installed the batteries CR1632, it is possible to reassemble the remote key fob. Then, you can program it into your car. The procedure should take no more than an hour, if not less. It is a very simple process that does not require any special equipment.
If you lose a key the process will be more complicated however, it can be completed. The dealer needs to first determine the VIN of the vehicle before requesting an additional TWICE module and key blade that has the correct unique code. The dealer will then have to program the key using MDI, a brand new software tool.
replacement saab car keys Key Fob
The key fob has an internal battery that is used to lock and unlock your car. The batteries last for a period of that is a long time, and they eventually expire. This is a common problem that happens to all cars and the good news is that you can replace the batteries on most key fobs and not have to replace the entire case. You can buy fobs replacements on Amazon that include all the electronics already installed, so you'll be able to simply open the case and replace the batteries that were in the case. It is important to note that you'll need take out the emergency key first. you can do this by inserting the small screwdriver flathead into the slot in the middle of the case. The case will split when you work the screwdriver all around it.
If you're ready to change your keys, have a spare available. This will save you a significant amount of money. If you have an extra key, you can request the dealer to cut it and program it for your vehicle. This is much less expensive than buying a new key fob.
It is possible to add a second key to your vehicle if you don't already have one, but it will require an extensive amount of research and work. The cost for adding a second key is a few hundred dollars, and it also requires programming of the car's computer. This can be done by a professional, but it's a costly choice for most owners.
Replacement Ignition
Unlike earlier Saab automobiles, the current SAAB 9-3 models feature an upgraded alarm system that is based on a coded key. If you lose your primary key, it may be expensive to add another one, as the car has to have a special computer added and be programmed to accept a brand new key. The majority of locksmiths aren't able to do this or even dealers can charge several hundred dollars just to program the new key!
If you've lost the only working key and a dealer is able to replace the computer in your car (known as the CIM or SAAB TWICE) to make a replacement, and they will charge top dollar for it. We can reprogram the existing EEPROM of your car's computer so that it's ready for an extra key. This will save you more than 50% off the cost you would pay a dealer.
If you have owned a car like the SAAB 9-3 for many years and you're aware of the ignition keys aren't very durable. If your ignition key is not functioning properly, you must consider replacing it. They can become extremely sticky and the buttons have been known to fall off. The good news is that replacing the ignition key isn't as complicated as it seems and is fairly easy to do with the proper tools.