UPVC
Window RepairsUpvc windows are energy efficient and help to reduce heating bills. However, as they age issues can develop that require fixing. This could be due to damaged hinges, handles or locks.
Wooden window repair is fairly easy for DIY enthusiasts to complete themselves. It's cheaper than purchasing a new window.
Cracks
Cracks and fractures in windows made of uPVC can be a serious issue. If they are not repaired, they can lead to water ingress and less effective protection against cold temperatures and the risk of structural damage. It is essential to locate a local builder or repair service that specialises in the repair of uPVC frames and can demonstrate the skills, experience and tools needed to produce the most effective results. This will ensure that the crack is repaired before it gets any worse and you don't need to replace the window glass or window unit.
There are a variety of home solutions that can be utilized to repair small cracks in glass. Masking tape and superglue are two of the most commonly used products used to keep glass that has cracked in place for a short time. For deeper cracks the tape may have to extend past the crack on both sides for optimal results.
Alternatively, two-part epoxy can be used to fix broken or cracked glass. It is available at most hardware stores and can be purchased for around $10. Make sure that your workspace is prepared prior to mixing the epoxy. Also, make sure you have the proper tool for the job like a soldering iron.
If you find that your lower or upper sash has difficulty raising it is most likely due to the cords connected to the sashweights are damaged. This is an easy fix that can be done using a ladder and a flathead screwdriver. A damaged dripcap can be easily replaced at home. The majority of home centers have a rot-free drip cap that can be easily caulked or nailed to be fixed. Verify that the glass in double-paned or triple-paned window is not cracked. This is because the gasses that fill the space between the panes are responsible for improving energy efficiency and should be kept, not escaping.
Water Leaks
If your uPVC window is leaking, it could ruin your interior and lead to costly repairs. Water leaks may also cause structural damage to your home, as well as the growth of mold. To avoid the damage, it's essential to address any issues caused by leaky windows as soon as you can.
The most common reason for window leaks is damaged sealant around the frame. Silicone caulking can restore the seal to its original state and prevent leakage. It's also important to check for cracks and gaps in the frame, as well as in the stone or brick walls surrounding your windows.
Another common reason for leaking windows is a blocked drainage hole or a defective flashing. It is important to ensure that the drainage holes are clear and free of obstruction, particularly in the aftermath of a heavy downpour. It's also a good idea to inspect the flashing on the bottom of your window and ensure that it's sealed properly.
It is also important to ensure that your drip cap isn't broken or damaged. A rotten drip cap or one that is missing allows water from above to seep into your window and cause structural damage. Replacing the leaky drip cap isn't difficult. It's as easy as purchasing an entirely new one and nailing it in place.
It's an excellent idea to have your windows tested for water-tightness with a professional. They can employ a tool to test the water-tightness of your windows and ensure that they meet industry standards. If your windows fail the test, they will need to be replaced. It's an expensive fix but it's worthwhile to ensure the safety and security of your family.
Sagging
If your windows don't close properly, it can lead to a number issues, such as condensation, drafts and a rise in your energy bills. It could also mean that the windows were not installed correctly or the sealant is worn out. There are a few things you can do to solve the issue.
The first step is to set up a workspace in a room that has plenty of light to fix your window properly. Begin by placing newspaper or an old blanket on the floor to shield it from drips or splinters that may come from the window as you work.
You should also make use of a white cloth that has been submerged in a solution containing detergent and water. This will prevent any color stains from appearing on your windows. When you're ready to work on your uPVC windows, begin by marking where the hinge channel should be situated. Unscrew the channel and fill the screw holes inside the frame using epoxy (for uPVC frames) or wood filler. Make sure you scrape the hole you have filled before it sets.
Once the holes have been filled, you can install the hinge channel. Make sure that it is centered on the window jamb. Also, make sure make sure you drill the holes for the new screws about a quarter inch from the original locations.
Then, measure the spindle protruding from the underside of your handle. You can order an alternative or bring it to a hardware shop for matching. Then, remove the setscrew from the shaft. Smooth it down to allow the set screw to secure onto the shaft. Now, your uPVC window should shut smoothly.
Broken Hinges
You will have difficulty opening or closing your uPVC windows when the hinges are damaged or not working correctly. This could be a security problem and could also hinder your home from being warm or cold. It's easy to get an entirely new hinge for your uPVC windows. It's crucial to choose the right type for your windows.
This is because the hinges have to be of the same width to fit into the window frame. The most popular hinge for windows made of uPVC are standard 18mm or UPVC 15mm hinges for windows. However, there are specialised kinds of
window repairs hinges that are suitable for different types of frames, like wooden frames. Getting the correct type of window hinge for your windows can help you avoid the common issues that homeowners face with their windows, such as not closing properly.
There are many reasons why your window hinges could be loose or stiff. The most common reason is that the hinges are not properly securing. You can test this with a screwdriver. locate the friction screw on the other side of the hinge, and then loosen it. Then, you can adjust it by turning it either way.
If your UPVC window hinges are not functioning as they should, you can call Preston Glass Fix for a quick repair. Our technicians will examine the condition of your hinges for your windows and advise you on the best solution for you. We can replace hinges on windows, retension them or install new locking mechanisms to ensure that your UPVC Windows are secure and safe.
Locks that aren't working
upvc window repair near me window locks and mechanisms are an essential component of the security of your home, they make it very difficult to open the window without breaking in. When a lock fails, it could be frustrating, however it is a quick and easy repair and you don't have to replace the entire window.
Often the problem can be a minor issue that could have been prevented if you have had regular maintenance. This is the reason we recommend having your uPVC windows serviced regularly with our annual maintenance program to reduce the chance of problems.
Modern uPVC windows come with espagnolette locks. They work by pushing the nose end of the handle over the wedge block, then turning it to close the lock. They are effective at locking the window, however if they are not maintained in a timely manner, they can begin to fail. We recommend applying WD-40 to them a few times per year.