Defra Approved Back Boiler Stoves
There are a myriad of things to consider when choosing the right stove. The appeal of dual function is just one of the many factors to consider.
Back boiler stoves approved by DEFRA are a fantastic solution to these problems. This is due to the fact that they use the most minimal amount of combustion air, which means very little smoke.
Clean Burn Technology
A defra-approved back boiler is an excellent choice if you want a clean burning stove that can warm your home as well as provide hot water to radiators. These stoves have an integrated steel boiler that is capable of heating central heating systems while the fire is burning inside the stove. This is a more efficient way to use wood burners.
The majority of our defra-approved back boiler stoves come with a heated, airwash system to keep the glass doors clear of soot and ash. They also come with secondary combustion systems that works by reburning any unburnt particulates produced during the initial combustion. This helps keep the flue gas clean which leads to a more efficient burning process and lower fuel costs.
Certain of our stoves have been tested independently and certified as Defra SE (Smoke Exempt). The stoves accomplish this by having a top air vent adjustment that prevents you from closing it completely, which would cut off oxygen supply to the flame. This causes the fire to smoke instead of burning properly and release more pollutants into the air.
Another important factor is the moisture content of your fuel, which can be a major contributor to the amount of smoke emitted by a stove. We recommend burning only dried, seasoned wood with at least 20% to ensure that your stove burns as efficiently and cleanly as is possible. The majority of our approved Defra stoves are equipped with a moisture sensor that can alter the rate of combustion when you use wet wood.
Some manufacturers have gone one step further to boost efficiency by adding a secondary clean burn system. This is controlled by a chrome lever on the bottom of the stove. It opens and closes an air vent that draws air over the fire, while reburning smoke that was created by the initial combustion process. Our Defra SE approved ranges are now even more efficient. You could save more money on your energy costs.
Easy to Clean
A defra-approved back boiler stove allows you to run your central heating and hot water from the same system. This can be done by making a loop that connects the other taps on your back-boiler (there are usually two) and your hot water tank. Then, you can use thermosyphoning in order to bring heat into your home. This will also ensure that your boiler will never run out of hot water since it is supplied by the tank.
To maintain your stove at its optimum level of performance, you must clean it frequently. Begin by making sure that the stove is cold to the touch, then wipe the body of the stove as well as the door with a clean, dry cloth. We suggest using a microfiber cloth as these are far less abrasive than cotton ones.
After you have cleaned the inside of your stove, it is recommended to clean the glass. Glass cleaners can aid in removing any marks or stains that are stubborn, and can be purchased at most hardware stores. Glass cleaner is best used sparingly as too much can harm glass surfaces.
As time passes, the seals around the glass of your stove's and doors may begin to wear out. It is crucial to replace the seals every year to avoid gaps that allow heat to escape. This can be done by using stove rope, which is available in most hardware stores.
If you own a defra-approved stove that has an Eco Design 2022 compliant back boiler and the combustion process is more efficient than traditional wood burning stoves. The most recent technologies have made it possible to reduce the amount of combustibles released into the air. This has made stoves that are compliant with the environment, and are also much less expensive to run.
Another thing to remember with a back boiler stove is that it will always be a bit more expensive than a normal multifuel stove because it will generate more hot water than a typical multifuel stove. It's still a cheap way to heat your home and can be used for central heating as well as hot-water.
Easy to Install
Boiler stoves are stylish and efficient solution that can supply hot water and heat for your central heating system. A wood burner with back boiler is distinct from other multi-fuel stoves that need to be connected to a gas boiler. It is able to connect directly to central heating and hot water of your home, eliminating the need for a separate heating system.
A wood burning with back boiler can be used to run your heating system entirely using renewable energy sources making them an green option than other stoves. Additionally, since they burn logs and pellets produce less emissions than oil or gas heating systems, which makes them an excellent option for those concerned about the impact their energy usage is having on global warming.
Although many people might be confused about how a wood-burning stove with a back boiler works installing one is quite simple. The most important thing is to make sure that the stove is installed and linked to your heating system, therefore it is best to have the installation done by a certified heating engineer. They can help you make sure that your stove has been correctly installed and connected to the right systems, in addition to making sure that all safety features are in place.
Defra Approved Stoves or Defra exempt stoves, as they are referred to, have met the Department of Environment, Food and Rural Affairs' (
DEFRA stoves near me) requirements regarding smoke emission levels. They can be utilized in Smoke Control Areas. They have been modified and tested to ensure they provide the most efficient burn and can be utilized with smokeless or wood fuels.
DEFRA approved stoves like the Defra Exempt Dunsley Yorkshire or our most popular Hi-Flame Aidan stove can provide a highly effective burn with very little harmful emissions. They have been tested to the latest Eco Design regulations that restrict the amount of particulate matter, CO2, NOx and organic gases the stove will produce in its normal operation.
Smoke Control Areas Suitable
Smoke Control Areas are in place in all UK cities and towns. Burning wood on old stoves or open fireplaces can result in a fine if the smoke is deemed to be an issue. The good news is that
defra permitted stoves approved back boiler stoves aren't subject to these restrictions if you choose the correct equipment for your home.
The Defra exempt wood burners are engineered to make use of Clean Burn technology which ensures that any fuel burnt is efficiently burned with little smoke production. This means that you can still have a beautiful fireplace even when you live in a smoke controlled area, but you will need to limit the use of logs to authorised mineral fuels that are smoke-free.
To meet Defra requirements, these stoves feature airtight chambers that are precisely controlled for airflow. They typically employ triple airflow systems to ensure that any combustion byproducts are able to be burned before they are able to escape the chimney. This reduces the nuisance smoke and minimises soot accumulation that could block the flue or reduce gas efficiency.
It is important that you purchase a stove that is Defra-approved from an Expert Local retailer that can ensure that the proper size stove is chosen for your home to ensure the most efficient heating performance, and that it is installed correctly by a registered HETAS installer. They can also help you with choosing the best type of chimney liner to ensure a safe and efficient installation, and advise on whether your house requires any additional ventilation.