Repairs to uPVC Windows
uPVC windows are a fantastic option for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they don't get rusty or decay.
It is crucial to wash and oil UPVC doors and windows on a regular basis. This will reduce unnecessary repair costs and also increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause serious damage to your home and even be fatal. You should take the time to ensure that your windows are in good condition.
For single pane windows it is relatively easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. If you have double-paned windows that are held together by internal beading, it will be harder to remove and replace the old panes. In this situation, you will need to source some plastic spacers that assist the new pane to fit correctly into the frame of the window.
If you're planning to try to remove the window panes yourself it is important to wear appropriate safety gear such as gloves that are thick and protective eyewear. It is also a good idea to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall onto the fabric instead of onto the floor, where they could be trodden under and cause further damage.
Once the glass is removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to stop water and drafts from entering the home until a professional can come out and fix the window. This will also act as a barrier, deterring any intruders from gaining entry to your home. If the gap between the door and the window is significant, you may prefer a security screen that also has windows. This will give you the best of both.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows with sash. In time, they could be affected by a variety of issues such as sagging. A sagging window in uPVC could cause issues with light, draughts and even security. If you find that your uPVC window is beginning to sag it's crucial to act fast to stop the issue from becoming worse.
To repair a window that is sagging, you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. You can then unscrew both the top and bottom hinges with a screwdriver and adjust them clockwise or counter-clockwise. After you've repositioned the hinges, close your
window repairs near me and verify the fit. If you're satisfied with the fit, you can tighten the screws until they stay in the right place.
If you aren't able to move the hinges, you may require replacing the seal. As time passes, rubber seals lose their elasticity and dry out, which causes their tightness to decrease. If this happens, it's crucial to replace the seal as quickly as possible to ensure your uPVC windows are watertight and safe from drafts.
uPVC handles may also loosen up. The majority of the time, this is caused by screws that have become loose over time. However, it could occur because the handle mechanism has worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need to shut the window and perform an initial fitting. The corners of the sash must be aligned with the casing joint. If it isn't you can use a screwdriver to loosen up the handle. Then turn the mechanism into position.
3. Water Leaks
If you wake up to damp floors and mouldy walls each time it rains it's crucial to take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who is competent. Depending on the severity of the issue the caulking that was used up may need to be removed before a new layer of caulk is applied. It is important to remember that when it is about
uPVC window repairs, do not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.
Verify that the drainage holes have no debris inside them and that the sill pan has been angled correctly to drain away from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotted sills are another sign of water leakage. This fungus thrives in conditions of dampness and can spread quickly throughout the house.
It is also important to remember that if the leak is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal, rather than the frame or sliding. It is also possible to be corrected by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or slack and open with a breeze, it may be hinges at fault. Anyone who is a skilled DIYer can fix hinges in just a few minutes.
Like any mechanical component hinges will be damaged over time. It is essentially a very simple process, but it's easier to do with someone else to assist in holding the frame in place.
Make sure that the uPVC hinges are closed and open in the proper direction. You can do this by looking for the arrow on each hinge. This indicates the direction in which the window should open.
The problem with the hinges on windows could be the result of incorrectly opening the
window repairs in a particular way or due to improper installation in the factory. This can often be resolved by sending us a photograph on our website. We will be more than happy to give you suggestions.
It is also crucial to ensure that the hinges are lubricated regularly. This can be accomplished by applying a light engineering oil on the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regular lubrication can make the window easier to open and close. It also decreases the chance of windows sticking and help prevent corrosion. This is recommended to be done at least every year. WD40 and other solvent based oils are not recommended because they can damage the parts of your uPVC window.
5. Draughts
Draughts in Upvc windows can be caused by a variety of various factors. The hinges, also because of wear and tear, can become misaligned, this causes a gap to form between the sash and the frame. If they are beyond repair, it might be required to realign them. Second, the interlock can be unbalanced. This is located on the hinge side and might require to be cleaned. In certain instances, it may be necessary to replace them.
The next most common reason for draughts are the window seals. These are susceptible to being worn out or damaged over time and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also reduce the possibility of draughts.
One of the most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes which are filled with a sort of filler and can be positioned on the top of your windowsill. They will help stop cold air from entering and keep your home warm and cozy!
With a little maintenance and repair, your upvc windows will provide excellent insulation and security for your home. It is crucial to keep in mind that all windows will eventually get worn out and it could be more cost-effective to simply replace them instead of fixing them.