Double Glazed Window Repair
Double glazing is an energy efficient investment that prevents loss of heat in winter and helps to keep your home cool in the summer. The ability to have your double-glazed windows repaired when needed is an excellent method to ensure they are operating correctly.
Over time condensation and misting could impact your double-glazed windows. This could cause your
double glazed window repairs glazed windows to be difficult to open or close.
Broken Panes
A stray baseball or a flying pebble from your lawnmowers, or even a heavy storm can break the double panes of your windows, leaving your home exposed to the elements. While a cracked window can be difficult to fix but you don't need to replace it entirely. The insulated glass that is between two glass panes is in good condition, so you can repair your double-paned window yourself.
To begin, you'll need to remove the broken glass from the frame. You'll need to be cautious to avoid any glass shards falling to the floor or falling out of the frame. Wear work gloves to protect you hands, and a rag around the broken glass area to prevent any further injury or cuts. After removing the broken pane and cleaning the entire frame of the window to get rid of any sealant residue and debris. Sand rough areas of the window frame to create a smooth surface to put in your new glass.
After the frame has been cleaned then you can apply a fresh layer of glass to the place in which the broken pane was removed. This is the best way to ensure your window stays sealed and protected and help you save energy costs by stopping drafts and water from getting into your home. The next step is to select the glazing material. Some options include clear tape which is more durable than regular tape and will help keep your window secure from further cracking, as well as glazing film that resembles clear plastic wrap. This choice has the benefit that it can be painted to match the frame of your window and will also keep out rain and ice.
No matter what material you decide to use it is important to press the glaziers points into the seam where the putty meets your frame. They will help hold the glass in place, and help it adhere to the frame. Glazier's points can be found in hardware stores, and they are available in pre-made ropes which you roll onto the frame rabbets.
Condensation
Double glazing can be prone to condensation issues and if you experience this issue, it is best to call the
company that installed the window. There are warranties and guarantees that cover these problems. Condensation or fogging between the panes of your windows is a sign that the seals aren't working properly. Only a professional can fix this issue by replacing both panes.
It is a tricky process that requires special tools to remove and replace the window. A professional can handle this job and provide the tools. It is best to leave the work to professionals. These tools can be dangerous.
If you choose to do this yourself, make sure you wear gloves and safety glasses to protect yourself from any broken glass pieces that could fly off during the process. It is crucial to remove any putty or metal glazing points from the grooves that will hold the new window. It is also recommended to wire-brush the frame and vacuum or wipe with a damp cloth. After the frame is dry, you'll need to order an additional piece of glass that's 1/8" shorter in both directions than the existing window. Make sure the glass fits into the grooves.
Depending on your frames, you will then need to apply a thin layer of silicone caulk to the grooves in order to ensure that the new pane is secured in the right place. Once the silicone caulk has dried you can smooth it out and make any necessary adjustments. The wood molding will then be reinstalled.
Double glazed windows can be difficult to open and close if the weather changes dramatically. Extreme temperatures can cause the frames to shrink or expand and cause them to sag or stick. You can try wiping down the frames with water and lubricating them in the event that this happens however, it's better to consult the company who installed your windows.
Misunderstood
When moisture gets trapped in between the glass panes, it can cause misted double glazing. Double glazing consists of two glass panes that are separated by an insulating space typically filled with argon gas to provide improved thermal efficiency. This creates an airtight seal that keeps warm air inside and cold air outside and allows you to keep your temperature in your home comfortable.
The seal may become damaged over time and moisture can build up between the glass panes which can cause them to turn to become cloudy. This happens because the space between the panes is heated by sun, which causes water vapour to develop within it.
This is a normal thing to happen, but when it occurs between the window panes, it could cause problems as it is no longer able to regulate the temperature of the room and will allow the outside temperature to affect the indoor temperature. Northfield Glass can help you when your double-glazed windows begin to mist.
We can replace the blow-sealed unit without having to replace the entire window and is less disruptive than a full replacement. Our misty window repair involves removing the glass, cleaning it, and then replacing it with a new one to create an watertight seal.
Some companies in the industry claim that they can inject chemicals through holes into misted windows to remove the fog and condensation. We don't recommend this method. This is not only unattractive, but it could also harm the toughened glass and leave you with windows that do not completely perform its function.
It is important to fix the issue as soon as possible, as left untreated, it can lead to mould growth that not only damages the window but also poses health risks for your family members. Moisture can cause other problems in your home, including dampness or rot. In some instances, the window may need to be completely replaced.
Blown or failed
Double-glazed windows are comprised of two glass panes with an inert or air between them. This improves their thermal efficiency, keeping heat in and cold out. Over time the gas will be depressurized and cause a variety of problems.
One of the most frequently encountered is condensation between the panes. Although it's a normal phenomenon, it doesn't mean your window is damaged, it can be an indication that you need to re-seal your windows. Condensation may also be a sign that your double glazing has broken and, in that case, it will need to be replaced completely.
You should also look out for draughts that are coming from your double glazed windows. This could be due to an unsound seal or a damaged handle or a broken lock. It is crucial to address the issue as quickly as possible. A draft will force you to pay more for heating. You can test the seals by placing your finger around the edges of the window frame to see if you feel any cold air.
There will also be water beads on the outside of windows when your window seals aren't performing as they should. This is a clear indication that you will need to re-seal your double glazed windows.
Your window frames have been designed to move slightly and this is essential to keep the glass sheets in position. Over time, this special packaging material may become compacted. This can cause the seal to become broken. This will allow the air to circulate between the panes, which will reduce your window's energy efficiency.
Double glazing that has broken an air seal is an indication of failure and needs to be repaired immediately. A blown seal will prevent your double glazing from fulfilling its primary job of keeping the cold out and warm in.