Repairs to uPVC Windows
Upvc window Repair is an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as timber and aluminum.
It is essential to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and improve energy efficiency.
1. Broken Glass
If the glass in your window is broken it can cause a huge deal of damage to your home, making it very hazardous and possibly fatal. It is important to take the time to make sure that you're doing all you can to ensure that your windows are in good condition.
For single pane windows it can be relatively simple to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However If windows with
double glazed window repairs panes are held in place by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this situation it is essential to buy plastic spacers to help the new pane fit into the window frame.
Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes, so that any shards fall onto the fabric and not onto the floor and could be trampled under.
Once the glass has been removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to block drafts and water from entering the home until a professional comes out and repair the window. This will also provide an obstruction to prevent intruders from making their way into your home. If the gap between the door and the window is substantial, you may prefer security screens that includes windows. This will provide the best of both.
2. Sagging
Upvc windows and doors are a low-cost energy-efficient, durable and long-lasting alternative to timber windows made of sash. In time, they could develop a number of problems that include sliding. A window that isn't properly aligned can cause problems with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from worsening.
Repositioning the hinges can help fix a window that is sagging. You'll first need to open the windows to get at the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver and adjust them counter-clockwise or clockwise. Close your window to test the fit after you have moved your hinges. If you are happy with the size of the window, you can tighten screws to hold them in the right position.
If you aren't able to move the hinges, you might need to replace the seal. As time passes, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is crucial to replace your seal as soon as you can in order to ensure that your uPVC window watertight and draughtproof.
UPVC handles can also become loose. The majority of the time this is due to screws that have come loose over time. However, it could also happen because the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. First, you'll need close the window and perform a test fit. The joint at the corner of the sash must align with the joint on the casing. If it isn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into the position it was in.
3. Water Leaks
If you wake up to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home and also affect your ability to regulate the temperature inside your home. The most frequent reason for leaks in uPVC windows is that the sealant around the frame is either damaged or not present.
This is a fairly simple fix that can be completed by any skilled DIYer. Depending on the severity of the issue is, old caulking may need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, you should not be tempted to apply too much caulk and then make the area more difficult to clean and reduce the efficiency of your energy.
Check that any drainage holes are free of debris in them, and also ensure that the sill pan has been properly angled to drain away from the window. In more severe instances, you may need to replace the window.
Mold spots and rotten sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.
If the leakage occurs between the double-glazed window, it is more likely that the issue is with the seal rather than the frame. A uPVC specialist can easily fix this problem by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
Hinges may be to blame for the reason that your uPVC window is difficult to open, or if it opens with a breeze. Anyone with the skills to fix them can replace these in a matter of minutes.
Like all mechanical parts hinges are prone to wear out over time. Changing a window hinge is essentially a simple process, but it's easier to do if you have someone to assist in holding the frame in place.
Check that the uPVC hinges are open and closed in the proper direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
The problem with the hinges on windows could be the result of incorrectly opening the window in a particular way or due to improper installation in the factory. This can often be resolved by sending us a picture through our website and we will be happy to give you suggestions.
It is also crucial to ensure that the hinges are lubricated regularly. Applying a light engineering lubricant to the hinges is a great way to do this. We suggest using the lubricant that doesn't contain solvents, like 3-in-1 Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It can also stop corrosion and reduce the possibility of sticking. This should be done at least once a year. WD40 and other solvent based lubricants are not recommended as they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different factors. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. If they're beyond repair, it might be necessary to have them realigned. Secondly the interlock, this is located on the hinge of the window, may also be misaligned, and again it is possible to give them a clean but in some cases it might be necessary to have them replaced.
The seals may wear out or get damaged over time, allowing air escape. This can be prevented by replacing them with high-quality weatherstripping. Another alternative is to replace the upvc window with glass that is low-emissivity, which will help regulate indoor temperatures and again will reduce the possibility of draughts.
The last way to reduce drafts effectively is to use a draught-excluder. These are usually made of fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.
The windows made of upvc can remain a great source of insulation and security for your home with a little regular maintenance and repairs. It is important to remember that all windows eventually wear out and it is more cost-effective to replace them than to repair them. So, if you are having issues with your upvc windows, it is recommended to seek assistance from a professional immediately.