Repairs to uPVC Windows
uPVC is a fantastic choice for
257634 modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they are not susceptible to rust or rot.
It is essential to clean and oil UPVC doors and windows regularly. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause significant damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good condition.
Single-pane windows are relatively simple to replace and generally fit into old frames very easily. If windows with double panes are joined by internal beading, it is more difficult to remove and replace the old panes. In this situation it is essential to buy plastic spacers to aid in fitting the new pane into the window frame.
Wearing eye protection and heavy gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth before you begin working on the window panes so that any shards of glass fall onto the fabric and not onto the floor and could be trampled under.
It's a great idea to seal the gap after the glass has been removed. This will stop water and drafts from entering your home until a professional comes out to repair the window. This will also provide a barrier to prevent any intruders from making their way into your home. If the distance between the window and the door is substantial, you may need to consider a security screen that also has a window. This will give you the best of both.
2. Sagging
uPVC is durable energy-efficient, cost-effective and economical alternative to timber sash window. However, over time they may be afflicted by a variety of problems including sagging. A sagging uPVC window can cause problems with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to stop the issue from worsening.
To fix a sagging window you can try repositioning the hinges. To do this, you'll need open the window to get to the frame. With the screwdriver, you'll be able to unscrew the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after you have repositioned your hinges. If you are happy with the size of the window, you can tighten screws to keep them in place.
If you are unable to move the hinges, you could have to replace the seal. Rubber seals may dry out and lose their elasticity over time, leading them to lose their tightness. It is important to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
UPVC handles can also become loose. Most often this is due to screws that have become loose over time. However, it can be due to the fact that the handle mechanism has been worn out. It's relatively simple to fix a loose uPVC hand. The first step is to close the window and perform an experiment to ensure that it fits. The corner joints of the sash must align with the casing joint. If it doesn't, you can use a screwdriver to loosen the handle and reverse the mechanism back into position.
3. Water Leaks
If you're waking up to wet floors and damp walls each time it rains, it's crucial to take action. Water leaks through windows can cause structural damage to your home, and impact your ability to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix that can be done by any DIY expert. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to uPVC repair, it is important to be careful not to over-caulk. This can make your window more difficult to clean and reduce its energy efficiency.
Verify that the drainage holes have no debris in them and ensure that the sill pan is properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.
Other indicators of water leakage include decayed sills and the appearance of black spots of mold on the wall near the window. The fungus thrives in conditions of dampness and can spread quickly throughout the house.
It is also important to note that if the leakage is coming from between the glass of your double glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sliding. A uPVC specialist can easily solve this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are difficult to open, or loose and open with a breeze It could be hinges at fault. They can be repaired by any DIYer who is skilled and can usually be completed in a matter of minutes.
Like any mechanical component, hinges can be damaged over time. It is an easy process but it can be easier if you have someone to assist in holding the frame up.
Verify that the uPVC hinges are closed and open in the proper direction. You can check this by looking for the arrow on each hinge. This shows which way the window should open.
Faulty window hinges could be the result of incorrectly opening the window in a particular way or due to inadequate installation at the factory. This issue can be fixed by sending us a photograph via our website and we will be happy to give you suggestions.
Regular lubrication of the hinges is essential. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication will make the window easier to open and close. It also decreases the risk of a window sticking and
257634.xyz prevent corrosion. Ideally, you should do this at least once a year. WD40 or other solvent-based oils should not be used since they could damage your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different things. Firstly the hinges, again due to wear and tear can become misaligned, this will cause a gap to form between the sash and the frame. If they're beyond repair, it could be necessary to get them re-aligned. Second, the interlock can also become misaligned. This is located on the hinge's side and could require to be cleaned. In certain instances it is possible to replace them.
The next most common cause of draughts is the window seals, these are prone to wear or damaged over time, and will allow air to escape through these gaps. This can be prevented by replacing them with high-quality weatherstripping. Another option is to replace the window with glass that is low-emissivity, this will help in regulating indoor temperatures, and also lessen the risk of draughts.
The final method to cut down on drafts effectively is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler that can be put on top of your window sill. They can keep your home warm by blocking out cold air.
With a little regular maintenance and repair, your upvc windows will continue to provide excellent insulation and security for your home. It is important to remember that all windows will eventually wear out and it could be more cost-effective to replace them instead of fixing them. So, if you are experiencing problems with your upvc windows, it's best to seek professional assistance as soon as you can.