Saab 93 Key Fob Replacement
Saab key fobs of 93 are costly to replace. However the procedure is easy.
All you need is a flathead screwdriver, and some patience. Simply insert the screwdriver in the middle of the case, and slowly push it open.
Having spare keys and fobs is an excellent idea. You can avoid being left stranded and having to pay towing charges.
How do you replace a battery
Car key fobs that can lock and unlock your vehicle remotely contain a battery that will eventually fail. With just a few steps, owners can replace the battery in their key fob. To remove the battery that was in the key fob and replace it with a brand new one, you need to open two flaps of plastic that are located on the opposite side. The replacement battery is a standard CR1632 coin cell and the procedure for installing it is relatively simple.
After removing the emergency key, use the flathead screwdriver on a small piece of wood to break the case. Be careful not pushing the case too hard, as the electronic components inside the case are delicate and may be damaged if you apply too much pressure.
Saab produced some incredible automobiles. Many of them are still around today. One of the major issues with these cars, however, is their ignition keys. The buttons may become stuck or fall off in time. It is expensive for a Saab owner to get a new key from a dealer when they lose their one working one. They will need to replace the computer module and then program the new key in order to convince the car that you're not attempting to steal it. You can save money by replacing the case.
How do you remove the manual key
Batteries are present in all key fobs that are used to unlock and lock cars. They have a limited lifespan. If you're like the majority of people, yours will die at some time. It's easy to replace battery for the key fob that is manual. The only challenging part of the process is removing the old battery from the case. With a bit of patience and a flathead screwdriver you can complete the task.
After you've installed the battery, it's time to reassemble the entire thing. You'll need a flathead to open the replacement case of the key fob. Insert the screwdriver into the slot in the middle. Carefully work the case until it splits and you can take it off of the key fob.
If your previous keyfob has lost its connection to your car's safety system it is possible to modify the new keyfob. You can do this by following the manual learning procedure to create a new FOB for your Saab 9-5. This method DOES NOT erase previously learned keys, so you can still use the existing FOBs in case they need to be programmed again. This procedure can only be initiated if the mechanical key of the vehicle matches the cut on the FOB.
How to Change the Case
If you're replacing the battery or the manual key it's a good idea replace the case too. The cases are susceptible to wear out, especially after prolonged use. It's easy to change the case of your SAAB 9-3, and you won't need any special tools.
To change the case, you'll need to first remove the manual key from your key fob. You can do this by pressing the blue saab key fob programming (
anchor) logo on the fob and pulling the manual key out. The key fob can be a bit sticky, so it may require a bit of force to take the key out.
Once you've removed the manual key from the case, you are able to begin to remove the electronic components. To do this, you'll need an inexpensive flathead screwdriver. You'll need to be careful not to damage the electronics inside, so be gentle when using your screwdriver. After you've removed the electronics, you can start taking off the battery. Once you've replaced your battery, you can place everything back into a new case. You can purchase replacement cases online for very little.
How do you program the new key?
Key fobs that allow you to lock or unlock your vehicle remotely, contain batteries. However they have a short time of life. It is important to remember this and change the battery on your key fob every three to four years. This is a simple process that you can complete at home. All you need is patience and an inexpensive screwdriver with a flat head.
The first step is to remove the manual key. You can do this by pressing the blue
saab 9-3 key fob replacement logo on the key fob and pulling the emergency key out. It may take some force however, the key should be released easily. After you have opened the key fob, you are able to remove the battery by gentle pressing the screwdriver inside the slot that is in the middle. This will split the case, making it easier to access the electronics.
It is now time to program the key. You can do this by following the steps in this video from YouTube user Cyclone Cyd. This is an excellent video channel that provides instructions on how to carry out simple repairs and maintenance on cars.
Key fobs are an excellent method of keeping an extra key in your car in case you lose or break it. You can buy a brand new keyfob online or from a local locksmith like United Locksmith. The cost is considerably lower than purchasing the key at a dealership. They would charge for the key, and then program it into your vehicle.