Ghost Immobiliser Installation
Protect your pride & joy from thieves by adding an immobiliser ghost. Our TASSA-certified system is safe from key cloning, hacking, and also vehicle immobiliser bypass.
The system is hidden within the wiring loom of your vehicle, making it totally invisible to anyone looking. It is created by generating a pin code push sequence by using buttons already on the steering wheel doors, door cards, and the central console.
No circuit cuts
It's not a surprise that people are concerned about protecting the vehicle they've spent so much money to purchase. However, traditional security systems such as alarms and wheel locks could easily be cut off or jumped by thieves. A ghost immobiliser however is a very effective solution that operates in a quiet manner and cannot be detected by modern thieves.
Ghost immobilisers or a hidden device, is a device that connects to your vehicle's data network CAN to shut off the engine. It does this without the use of key fobs or radio frequencies. It communicates with your vehicle's ECU via buttons already on the steering wheel, dash and door panels to generate an unique pin code that you only know. The code can be altered at any time, and can include up to 20 numbers based on your preferences. It also comes with an emergency code that you can use in the event that you forget your PIN.
The ghost immobiliser could also be used to stop relay boxes from transferring the car key's signal inside your home, which will unlock the doors and then start the vehicle. It can even block new advanced methods of stealing your car such as OBD port hacking. The device is small, weatherproof and difficult to spot. It's also very difficult to alter.
Another benefit of the ghost immobiliser is that it can be installed to your vehicle without permanent marks. It's ideal for those who are planning to sell their vehicle in the near future. It's also a lot faster and easier to install than a factory-fitted system.
The Autowatch Ghost is a revolutionary next-generation device that can stop vehicles that are stolen through contactless by connecting to the vehicle's CAN data network and using the existing buttons to generate a unique PIN. This is a hidden system that can be put in place without removing wires and requires no additional key fobs. It can also be connected to the vehicle's original ECU to prevent thieves from gaining access by using an additional key or replacing the ECU with the use of a "relay". This system has been TASSA-verified and is compatible with an International Security Register. Owners will be able to rest easy knowing that their vehicle is secured from theft.
No scanning by RF
If you've invested a lot of time and money in the customization of your vehicle, you will want to protect it from theft. Installing an immobiliser is one of the best ways to stop theft. It will stop your vehicle from starting until you enter a unique code. Using the buttons on your steering wheel as well as the dashboard, you can create a PIN up to 20 digits long that is only accessible to you, making sure that only you are able to drive your vehicle. You can also set up a valet and service mode that allows you to temporarily start your car without entering the PIN code. This allows your technician to work on your car without you being there. This is a fantastic feature for those who want to reduce time and make their lives easier.
ghost ii immobiliser immobilisers, which are new generation device connects to the CAN data network of your vehicle. It uses the buttons located on the dashboard as well as the steering wheel to set a PIN number. It is designed to blend in with the vehicle's design, as it doesn't emit any sound or light indicator. It can be put in anywhere on your vehicle, without altering the look of the vehicle.
This stealthy device has been approved by TASSA and can reduce the cost of insurance. It also comes with a tracking function that can track your vehicle even if it's been stolen. This is particularly useful if have a rare or expensive vehicle that you have invested lots of time personalising.
The Autowatch Ghost can be used in conjunction with an iPhone application to allow you to start your car remotely in the event you forget your PIN or are not able to access the vehicle due to a reason. This feature is great if you have to run errands or pick up your children but don't want to risk having someone else drive your car. This feature is helpful if you have to take your car in for repair or service.
The Ghost has the advantage that it does not transmit or detect radio frequency, so it is undetectable by thieves who use RF scanning and code grabbing technology. It also shields your car from key duplicates, ECU swapping and other usual methods of car theft.
No key cloning
Ghost autowatch immobiliser (
humanlove.stream) immobilisers are a great option to protect high-end vehicles and are designed to block key cloning. They prevent your car from being started until a PIN code has been entered in conjunction with the standard key fob. This makes it difficult for thieves to steal your vehicle, and can deter them from attempting. This is a great idea if you've spent a lot of time and money personalising your vehicle, or own a rare or expensive model.
These immobilisers are connected to the vehicle's onboard CAN network and are completely hidden meaning that there is no visible indication of its presence within the vehicle. It is also difficult to detect by using radio frequency scanning technology or code grabbing. This means a thief would have to spend more time to take your vehicle.
A criminal will need to know the unique pin sequence and the exact location of the ghost to get around it. The pin code is unique to you and can alter it as many times as you want. The pin code you select is simple to remember, but mathematically difficult for anyone else to figure out. The engineer will also provide an emergency PIN code in case you forget the pin.
The Ghost CAN bus immobiliser is weatherproof and easily installed in any part of your vehicle. It works with all vehicles and is fully customisable to match the appearance of your vehicle. It is also simple to use and cost-effective. The device can be moved to a different vehicle, as long as it is compatible with the new vehicle.
The CAN bus is compatible with other security features. It is able to, for instance, detect damage to the vehicle and notify the owner. It can also stop the engine in the event that the car is damaged. The system will protect your vehicle from hacking and key duplication. It also detects vibrations or contact with the vehicle. It can also notify the owner if the vehicle is moving.
No OBD port hacking
Ghost uses a hidden module that is connected to the CAN data network of your vehicle. This prevents a thief trying to hack into your vehicle to disable your alarm, deactivate your key fob, or create new keys. This technology is a significant improvement over the methods that have been employed by thieves in the past to take your vehicle. The CAN data networks means that your system won't be affected by disconnecting or change your battery.
The Autowatch Ghost is the world's first aftermarket CAN bus non-detectable immobiliser that safeguards against hacking, key-cloning and theft of replica cars. It does not use LED indicators or key-fobs, instead leveraging the buttons in your steering wheel or centre console, as well as the door panels to allow you to create a unique PIN code sequence (up to 20 button presses) that must be entered prior to when you can drive your vehicle away.
Modern thieves employ diagnostics to detect cuts in the circuit on your vehicle. They can bypass immobilisers that require lots of wiring or are integrated into the wiring.