How to Replace a UPVC Window Handle
Don't be worried when your upvc handle has become broken. Replacing the handle made of upvc on the window is a simple task that can be accomplished in a couple of simple steps.
It doesn't matter if you have an in-line or a cranked espagnolette window handle, they all have a square spindle that protrudes from the back plate. The spindle is fitted into the locking device.
Identify the type and size of the lock and handle
Over time window handles and locks may be damaged or lose their function. It is possible to fix this problem without having to replace the entire uPVC unit. The first thing you should do is to identify the size and type of the lock and handle. This will help you determine the
replacement window locks parts you need.
You can identify the kind of handle by examining the base. A screw or pin is what holds the handle to its base. If the screw is missing, this can be an indication that the handle has split away from its base. If the handle is broken internally and doesn't hold the spindle any longer it could be a sign that the handle must be replaced.
There are a variety of different types of uPVC window handles, but the most common is the Espag handle. They are usually secured with two bolts and the spindle is connected to the locking mechanism of the frame of the window. These handles are typically used on uPVC tilt and turn windows.
Cockspur handles are another type of uPVC handle. They're similar to Espag handles, but have a lower projection from the frame. These handles are typically used on older uPVC windows.
Venetian window handles are another alternative. They are similar to Espag handles but have a flat bottom which allows them be installed flush with the frame. These are a great choice for homeowners looking for an elegant, stylish handle that will blend in with their uPVC window frames. They are also available in a wide range of colours to match any decor.
Take a measurement of the spindle
It is crucial to know how the handle is fixed in place before ordering an replacement. This will determine how tight or loose it is and whether it will be able to fit into the window frame. This can be accomplished by identifying the handle's type and measuring the spindle. The spindle is a steel shaft that connects your handle to the lock on the window frame. The spindle comes in various sizes. The current industry standard is 8mm. Older handles could have a cross-section of 9mm, so you'll need to measure your old handle to ensure you get the right size replacement.
There are a variety of window handles. However, the most commonly used are inline Espagnolette and cockspur handles. These handles are used to operate a locking system inside the window. They use shootbolt rods that secure the window after it has been shut. Depending on the type of handle, they are held in place by screws or pins.
You can purchase replacement upvc handles on the internet or at most DIY stores. They are available in a variety of finishes and are suitable for new and replacement windows. They can also be key-locking or non-locking for extra security.
To remove the old handle simply open the window to the door and remove all screws that hold it in place. Keep the screws in a container to protect them from damage. After the screws have been removed, remove them carefully from the handle. Measure the distance from the base of the spindle up to the tip. This will give you the necessary information to purchase the correct replacement. The handle's spindle is the shaft of steel that connects it to the lock gearbox in the window frame.
Take off the handle from the old one.
The replacement of a uPVC window handle is a simple job that usually takes no more than five minutes with the right tools. The first step is to identify the kind of lock and handle, which will help you identify the right replacement. Then, you can measure the spindle to ensure that the handle will fit. The old handle will need to be removed and replaced with the new one.
Most uPVC handles have inline Espagnolette handles. These handles feature central spindles that slot into the locking mechanism of the window. These are generally easy to remove, however you may need to use force to remove them if they are stuck. There are typically two screws that hold the handle in place, which can be removed using the help of pliers or a screwdriver. You may also need to remove pins based on the kind of handle.
After you have removed the screws, you can then remove the handle that was previously attached. When the handle is open the top of the baseplate should be visible. It will reveal two additional screws that can be unscrewed. There's also a small silver or other colour sticker that needs to be removed if in place.
You can now screw into the new handle using the screws from the old handle. Align the screw holes on the window with the holes in the handle. After you've done this you can replace the screw caps. Test the new handle. Changes to a window made of uPVC can be a simple and quick task, but it's crucial to make sure you do it correctly.
Replace the handle with the new one.
It's time to put in your new handle if you've successfully removed the old one from the frame. Begin by finding the screws and then removing them out using a screwdriver. Once they are removed, put them in a secure place and proceed to the next step.
Then, screw the spindle in by aligning it with the existing hole. Be sure to align the holes in the handle with those in the window frame. You should use a screw that is identical to those used previously or it could cause the handle to not being secure.
The uPVC Espag handle comes equipped with a spindle that is 7mm square which turns the lock mechanism on the window. This style of handle is found in most modern uPVC Windows. uPVC Cockspur handles (also known as Cotswold handles) come with a long nose that locks over the frame's outer edge or transom bar cross member. They are typically found in older uPVC windows.
It is important to lock and unlock the window a few times after the handle is installed. If everything goes to plan the new uPVC window handle should now be secure and functioning smoothly. If not, the above steps will help you identify any problems and get it fixed quickly. Bridgewater Glass can help you in the event of problems with your uPVC handles or other home improvement that is glazed. Our glaziers can repair or replace various window handles and frames. This makes us an excellent option for double-glazing.
Test the new handle
Over time and through normal use over time, uPVC locks and handles may be damaged and wear and wear and. This can leave them less effective and secure, so it's important to replace them as soon as possible. This is also a good idea to do when you are upgrading your windows. Switching the handle and locking mechanism will ensure your new windows' integrity.
There are many different styles of uPVC window handles. Some are attached to the frame with pins or screws, while others have blades which slot into the lock mechanism. Each type has its own method of replacement, and it is important to know which type you have before working on it.
Espag window handles are the most well-known type, and they're typically found on the latest uPVC
windows glass replacement. These handles come with a spindle that extends out from the handle and into the gearbox of the lock, and when you open the window it triggers the locking mechanism. They are also simple to remove. However, it is important to be careful not to harm either the mechanism or the handle.
Cockspur window handles are another popular choice for uPVC windows. The locking mechanism is activated when the window is closed or tilted. A spur attaches to the striker plates in the shape of wedges on the frame.
