UPVC Window Repairs
Upvc windows can cut heating costs and are energy efficient. As they age, however, problems can occur that need to be fixed. This can be due to damaged handles, hinges or locks.
Wooden
window repairs can be fairly easy for DIY enthusiasts to tackle themselves. It can also be much less expensive than a brand new replacement window.
Cracks
Cracks and breaks can be a major problem. Windows that are not repaired can lead to water intrusion and weaker barriers to cold weather, or even structural damage. Find a local builder who is skilled in repairing uPVC frames. They must possess the necessary knowledge and experience as well as the right equipment to get the best results. This will ensure your fracture is repaired quickly before it gets worse, and you won't have to replace your window unit or glass.
Small cracks in glass can be fixed by using a variety of home-based solutions. Masking tape and superglue are two of the most popular products used to keep glass that has cracked in place for a brief duration. For cracks that are more extensive the tape might need to extend past the crack on both sides to achieve the optimal results.
Another option is two-part epoxy that can be used to repair broken or cracked glass. The majority of hardware stores sell this product for around $10. Make sure your work area is properly prepared prior to mixing the epoxy. Also, make sure you have all the equipment necessary to complete the task.
If your lower or upper sash isn't lifting easily it's because the cords that connect the sash's weights have been damaged. This is a simple fix that can be accomplished using a ladder and a flathead screwdriver. A rotted dripcap can also be easily repaired at home. Most home centers carry drip caps that are rot-free and can be easily nailed or caulked in place. Lastly, if you have a
double glazed window repairs near me- or triple-pane window, be sure to make sure that one of the panes isn't broken. The reason is because the gases in the space between the windows are responsible for enhancing the energy efficiency of the window and should not escape.
Water Leaks
If your uPVC windows are leaking, it can cause damage to the interior of your home and lead to expensive repairs. Water leaks can also cause structural damage to your home, as well as mold growth. To minimize damage, it's important to repair any issues caused by windows that leak immediately.
A damaged sealant around window frames is a typical cause of leaks. Using silicone caulking can help restore the condition of the seal back to its normal condition and stop water leakage. Check for cracks and gaps around the window frame, and also the stone or brick wall surrounding your windows.
A blocked drainage hole or faulty Flashing are two other typical causes of windows that leak. Verify that the drainage holes haven't been clogged or blocked, especially after a heavy downpour. It's also recommended to examine the flashing that runs around the top of your
window repairs near me and ensure it's sealed correctly.
It's also important to ensure that your drip cap does not have any rot or is missing. A rotten drip cap or one that is missing will allow water from above to get into your window and cause structural damage. Replacing the drip cap that is leaky is not a difficult task. It's as easy as purchasing an entirely new one and nailing it in place.
It's recommended to have your windows tested for water-tightness with a professional. They can employ a tool to determine the water-tightness of your windows and ensure that they meet industry standards. If your windows fail the test, they will require replacement. It's an expensive fix however it's worthwhile to ensure the safety and security of your family.
Sagging
If your windows don't close properly, it could lead to many problems, such as drafts, condensation and a rise in energy costs. It could be a sign that the windows weren't properly installed or the sealant is no longer effective. There are a few things you can try to fix the issue.
The first step is to prepare an area that has plenty of light to fix your window properly. Begin by placing newspaper or an old blanket on the floor to protect it from any drips or splinters that might be coming from the window during your work.
It is also recommended to use a white cloth which has been immersed in a solution of detergent and water. This will ensure you don't leave any stains of color on your windows. Note the location of the hinge channel on your uPVC window when you are ready to start working. Then, remove the channel from the frame and fill the screw holes with epoxy (for uPVC windows) or wood filler (if your frames are made of wood). Be sure to scrape the filled hole smooth before it sets.
Install the hinge channel once the holes are filled. Make sure you center it on the window jamb, and then drill the new screw holes about a quarter-inch away from the original locations.
Then, take a measurement of the spindle protruding from the underside of your handle. You can order a replacement or bring it to a hardware shop to find a suitable replacement. Then, take the setscrew off the operator shaft. Flatten it to allow the set screw to secure onto the shaft. Now your uPVC window should be closing easily.
Broken Hinges
If your uPVC window hinges have been damaged or aren't working properly then you'll find it difficult to open or close the window. This could create an issue with security and stop your home from being cool or warm. You can easily get a new hinge for your uPVC window. It's crucial to choose the right type for your windows.
This is because the hinges need to be of the same width to fit into the frame of the window. The most commonly used hinges for windows made of uPVC are standard 18mm or UPVC 15mm window hinges. However, there are specialised types of window hinges for other types of frames like wooden frames. The right type of hinge will help you to avoid the common issues with your windows.
The hinges of your window could be slack or stiff for several reasons. The most common reason is that the hinges aren't tightened enough. You can test this using a screwdriver to locate the friction screw on the other side of the hinge and loosen it. Then, you are able to adjust it by turning it in either direction until you get the desired result.
Contact Preston Glass Fix if your UPVC window's hinges aren't working properly. We can provide an immediate fix. Our technicians will inspect the condition of your hinges and give you advice on the most suitable solution. We can repair or replace your window hinges or retension them, or even install new locking mechanisms to ensure that your UPVC windows are secure and safe.
Locks that aren't working
UPVC window locks and mechanism are an essential component of home security. they make it extremely difficult to open the window without breaking in. When a lock fails, it could be frustrating, however it is a quick and simple fix and you don't have to replace the entire window.
Sometimes, the issue is an issue that could have been avoided by regular maintenance. This is why we recommend having your uPVC windows maintained regularly using our yearly maintenance package to help reduce the likelihood of issues.
The majority of modern uPVC windows come with espagnolette locks that work by pushing the handle's nose across a wedge block then turning the handle to close the lock. They are extremely efficient in keeping windows secure, but with time, they may begin to fail if they are not properly maintained. We recommend using WD-40 for lubrication every couple of times a year.