Repairs to uPVC Windows
uPVC windows are an excellent choice for modern homes. They are easy to maintain and durable, as well as long-lasting. They do not rot or rust like aluminum or timber.
It is essential to clean and oil UPVC windows and doors on a regular basis. This will help prevent unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause serious damage to your home and may even be fatal. It is essential to take the time to make sure that you're doing all you can to keep your windows in good condition.
Single-pane windows are relatively simple to replace and generally fit into frames that were previously in use very easily. If you have
double glazed window repairs near me-paned windows which are held together by internal beading, it will be difficult to remove and replace the panes that were previously in use. In this instance it is essential to buy plastic spacers to help the new pane fit into the window frame.
If you plan attempt to remove the window panes yourself, it is essential to wear appropriate safety gear that includes gloves with a thick layer of material and eye protection. It is also recommended to lay down a dropcloth prior to you begin working on the window panes, so that any shards fall onto the fabric, not onto the floor which could cause them to be trampled under.
Once the glass has been removed and the glass is removed, it's a good idea to cover the gap with some clear packaging tape or duct tape to block water and drafts from entering the property until a professional is able to come out and repair the window. It also acts as a barrier, preventing any intruders to gain access to your home. If the gap is particularly large, you may want to consider using a security door that has an integrated
window repairs near me, since this will offer the best of both worlds.
2. Sagging
uPVC is a durable and energy efficient alternative to timber sash windows. In time, they could develop a number of problems, including sagging. A sagging window can cause problems with light, draughts or even security. If you find that your uPVC window is beginning to shrink, it's crucial to act fast to prevent the problem from becoming worse.
Repositioning the hinges can help fix a window that is sliding. To do this, you'll have to open the window to get to the frame. After that, using the screwdriver, you'll be able to unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, shut your window and verify the fit. If you're satisfied with the size of the window, tighten the screws to keep them in place.
If you can't reposition the hinges you may need to replace the seal. Rubber seals may dry out and lose their elasticity with time, which causes them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and draught-proof.
uPVC handles may also become loose. This is usually due to screws that have been removed over time, but it can also be due to the mechanism of the handle wears out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close the window and then perform an initial fitting. The corner joints of the sash should be aligned with the casing joint. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then reverse the mechanism back into position.
3. Water Leaks
It is important to act if you awake each day to find a smoky wall and wet floors. Water leaks through windows can cause structural damage to your home and hinder your ability to control the temperature inside your home. The most common cause for leaks in uPVC windows is that the sealant surrounding the frame has been damaged or is missing.
This is an easy fix that can be accomplished by any DIYer who has the ability. Depending on how severe the problem is, the old caulking may have to be removed. It is essential to remember that when it is about
uPVC window repairs you should not be tempted to apply too much caulk' as this will only make the area harder to clean and could reduce the efficiency of your energy.
It is essential to ensure that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more extreme cases, you may need to replace the window.
Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in humid conditions and can propagate quickly throughout the house.
If the leakage occurs between the double-glazed glass it is more likely that the problem is related to the seal, not the frame. Again this can easily be fixed by an uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open, or if it opens in an ease. Any competent DIYer can replace these in a matter of minutes.
Almost every household in the UK will have either top hung or side-hung uPVC windows that use hinges and, like all mechanical parts, they are susceptible to wear and tear over time. It's easy to replace a hinge on a window, but it's simpler if you have someone to help you hold the frame.
It is also important to ensure that the uPVC hinges are being opened and closed in the right direction. Check for the arrows on each hinge to determine the direction in which the window should be opened.
Faulty window hinges can be caused by incorrectly opening the window in a certain way or by inadequate installation at the factory. Sending us a photo via our website will often resolve the problem. We are happy to give assistance.
Regular lubrication of the hinges is also necessary. This can be done by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can allow the window to open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. The ideal time to do this once a year. WD40 and other solvent based fluids are not recommended since they could damage parts of your uPVC window.
5. Draughts
Draughts can be caused by several different causes. The hinges, also due to wear and tear can become misaligned, this causes an opening to appear where the sash meets the frame. If they are damaged beyond repair, it could be necessary to get them re-aligned. Second, the interlock can be unbalanced. It is located on the hinge's side and may need to be cleaned. In certain instances it is possible to replace them.
These seals can wear down or become damaged over time, allowing air escape. Replacement of these with high-quality weatherstripping can help keep draughts at bay. Replace the upvc windows with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.
Lastly, one of the most effective ways to reduce the draughts in your home is to use a draught excluder. These are typically made of fabric that are filled with some kind of filler. They can be put on the top of your windowsill. They can help stop cold air from entering and keep your home warm and cosy!
Your upvc windows can continue to provide excellent insulation and security to your home with a little regular maintenance and repairs. It is important to remember that all windows will eventually become worn out, and it is more cost-effective to replace them than to repair them. If you are experiencing issues with your upvc window, it's best to consult a professional as soon as you can.