Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to rot or rust like timber and aluminum.
It is crucial to wash and oil UPVC doors and windows on a regular basis. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window is damaged, it can cause a great deal of damage to your home, making it extremely dangerous and possibly fatal. It is essential to take the time to make sure that you're doing all you can to ensure that your windows are in good repair.
For single pane windows, it is fairly easy to replace them, and the replacement will usually fit inside the frame that was previously installed easily. However If you have double pane windows that are secured by internal beading, it'll be more difficult to remove the panes that are in place and replace them with new ones. In this instance it is essential to purchase plastic spacers in order to make sure that the new pane fits into the window frame.
If you're planning to attempt to remove the window panes by yourself, it is essential to wear appropriate safety gear, including thick gloves and eye protection. You should also lay down a drop cloth before you begin working on the window panes to ensure that any shards fall onto the fabric and not on the floor, where they could be trampled under.
It's a great idea seal the gap after the glass is removed. This will stop water and drafts from entering your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders to gain access into your home. If the gap between the window and the door is substantial, you may prefer an alarm system that includes an opening. This will provide the best of both.
2. Sagging
uPVC windows and doors are a low-cost, durable and energy-efficient alternative to timber windows made of sash. However, with time, they may be afflicted by a variety of issues, including sliding. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it is important to act swiftly to stop the issue from becoming worse.
To repair a window that is sagging, you can try repositioning the hinges. You'll first need to open the windows so you can get at the frame. After that, using the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or counter-clockwise. After you've repositioned the hinges, close the window and check for fitting. If you're satisfied with the size of the window, you can tighten screws to secure them in place.
If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles may also loosen. Often it is due to screws that have become loose over time. However, it can occur because the handle mechanism has worn out. Luckily, it's not difficult to repair the loose
upvc window repairs window handle yourself. You'll first need to close the window and do an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it doesn't then you can use a screwdriver or a wrench to loosen the handle, and then turn the mechanism back into its original position.
3. Water Leaks
If you wake up to wet floors and mouldy walls every time it rains it is important that you take action. Water leaks through windows can cause structural damage to your home and also impact your ability to regulate the temperature of your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the problem the caulking that was used up may require removal before a new layer of caulk can be applied. It is essential to keep in mind that when it comes to
uPVC window repairs, you should avoid the temptation to "over-caulk in order to make the area more difficult to clean and could reduce your energy efficiency.
Verify that the drainage holes are free of debris in them and that the sill pan is angled correctly to drain away from the window. In more severe instances, you may need to replace the window.
Moldy sills and rotten ones are also signs of water leakage. The fungus thrives in humid conditions and can propagate quickly throughout the house.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is more related to the seal, not the frame. Again this can easily be repaired by an uPVC window expert who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be the reason when your uPVC window is difficult to open, or if it opens in an ease. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Like any mechanical part hinges are prone to wear out over time. It's easy to change the hinges on a window, but it's easier if someone helps you to hold the frame.
Make sure that the uPVC hinges are closed and open in the correct direction. This can be done by looking for the arrow on each hinge. This shows which way the window should open.
The problem can be caused by opening the window incorrectly or by a poor installation in the factory. This can often be resolved by sending us a picture through our website and we will be pleased to offer you advice.
It is also essential to grease the hinges regularly. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window operate and close more smoothly. It also helps prevent corrosion and decrease the chance of sticking. Ideally, you should do this at least once a year. WD40 and other solvent-based fluids are not recommended since they will damage parts of your uPVC window.
5. Draughts
Draughts can be caused by different causes. The hinges can also be unbalanced due to wear, causing an opening between the frame and sash. If they're beyond repair, it may be necessary to get them re-aligned. The second is the interlock, which is located on the hinge of the window and can also be misaligned, and again it may be possible to give them a good clean, but in certain cases, it may be necessary to get them replaced.
These seals can wear down or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures, and reduce draughts.
Another method of reducing the amount of draughts is to use a Draught-exclusion device. These are typically fabric tubes filled with a filler, which can be put on top of your window sill. They can help stop cold air from entering and keep your home warm and cosy!
Your windows made of upvc will continue to provide excellent insulation and security to your home with regular maintenance and repairs. However, it is important to realize that windows last for a certain period of time and there may come a point where it is more efficient to replace them than fix them. So, if you're having issues with your upvc windows, it's recommended to seek assistance from a professional as soon as you can.