Repairs to uPVC Windows
uPVC windows are an excellent option for modern homes. They are easy to maintain, durable and long-lasting. They don't decay or rust as timber and aluminum.
It is crucial to wash and oil UPVC doors and windows regularly. This will save you from unnecessary repair costs and also improve energy efficiency.
1. Broken Glass
The broken glass in your windows could cause significant damage to your home, and could even be fatal. It is essential to ensure that your windows are in good condition.
For single pane windows, it is relatively easy to replace them, and the replacement will usually fit inside the old frame very easily. If you have double-paned windows which are joined by internal beading, it is more difficult to remove and replace the old panes. In this case, you will need to locate some plastic spacers that help the new pane to fit properly into the frame of the window.
If you plan attempt to remove the glass panes yourself, it is essential to wear the appropriate safety equipment that includes gloves with a thick layer of material and protective eyewear. It is also recommended to lay down a drop cloth before you begin working on the window panes to ensure that any shards fall on the fabric, not onto the floor, where they could be trampled.
After the glass has been removed and the glass is removed, it's a good idea to seal the gap with some clear packaging tape or duct tape to prevent water and drafts from getting into the home until a professional can come out and fix the window. This will also provide a barrier to prevent any criminals from getting into your home. If the distance between the window and the door is substantial, you may prefer a security screen that also has an opening. This will provide the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash
window repair. As time passes, they may develop a variety of issues, including sliding. A sagging uPVC windows could cause issues with light, draughts, and even security. If you notice that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from worsening.
To repair a window that is sagging, you can try to reposition the hinges. To do this, you'll need open the window to get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have moved your hinges. If you're satisfied with the fit of your window, you can tighten screws to keep them in place.
If you aren't able to move the hinges, you might require replacing the seal. Over time, rubber seals lose their elasticity and become dry which causes them to loosen. It is crucial to replace your seal as quickly as you can to keep your uPVC window waterproof and draughtproof.
uPVC handles could also become loose. This is often caused by screws that have loosened over time, but it can also be due to the handle mechanism wears out. It's a good thing that it's simple to fix a loose uPVC window handle yourself. First, you'll need to shut the window and do a test fitting. The corners of the sash should align with the casing joint. If it doesn't, you can make use of a screwdriver to loosen the handle and then reverse the mechanism back into its original position.
3. Water Leaks
If you wake up to damp floors and mouldy walls every time it rains it's important to take action. Windows that leak water do can not only cause degrading of the structure of your home but also hinder your efforts to regulate the temperature within your home. Most of the time, uPVC window leaks are caused by a lack or damage to the sealant.
This is a relatively easy fix that can be done by any DIY expert. Depending on how severe the issue is, old caulking might need to be removed. It is crucial to keep in mind that when it is about uPVC window repairs, do not be tempted to apply too much caulk in order to make the area harder to clean and can reduce your energy efficiency.
It is crucial to make sure that any drainage holes are free of debris and that the sill pan is angled in a way that allows it to drain away from the window. In more serious cases you might need to consider replacing the window.
Other signs of long-term water leakage include decayed sills and the appearance of black spots of mold on the walls near the window. The mold thrives in damp environments and is able to quickly spread throughout the home.
It is also important to keep in mind that if the leakage is coming from between the glass of your double glazed windows, it's more likely to be a problem with the glass seal rather than the frame or sagging. A uPVC specialist can easily fix this problem by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
Hinges could be at fault when your uPVC window is difficult to open, or if it opens in the breeze. They can be repaired by any DIYer who is skilled and can be completed in just a few minutes.
Like any mechanical part hinges are prone to be damaged over time. It's easy to replace a hinge on a window, but it's easier if someone helps you hold the frame.
It is also worth checking that the
Upvc Window Repair hinges are opened and closed in the right direction. This can be done by looking for the arrows on each hinge. This indicates the direction in which the window should be opened.
The problem with the hinges on windows can be caused by incorrectly opening the window a certain way or by poor installation at the factory. Sending us a picture via our website will often resolve the problem. We are happy to provide advice.
Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It also helps prevent corrosion and reduce the risk of sticking. Ideally, you should do this once a year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts can be caused by several different factors. The hinges may also become unbalanced due to wear, which can cause an opening where the sash and frame meet. They can be repaired by giving them good clean, but if they are beyond repair it could be necessary to get them realigned or replaced. In addition, the interlock could also become unbalanced. This happens on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace the hinges.
These seals are susceptible to wear and tear or become damaged over time, allowing air escape. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease the risk of draughts.
The final method to cut down on the amount of draughts is to use a draught-excluder. These are usually made of fabric tubes filled with a filler, which can be placed over your window sill. These will help to keep cold air out and keep your home warm and cozy!
Your upvc windows can remain a great source of insulation and security in your home with regular maintenance and repairs. It is crucial to realize that all windows have a life span and eventually, they will reach a point where it is more cost-effective to replace them rather than fix them. If you encounter any issues with your Upvc window, it's best to consult a professional as soon as possible.