Repairs to uPVC Windows
uPVC is an excellent choice for modern homes. They are long-lasting, durable and easy to maintain. As opposed to aluminium and timber they do not corrosion or rot.
It is essential to clean and oil UPVC windows and doors regularly. This will help prevent unnecessary repair costs and also improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows can cause severe damage to your home and may even be fatal. It is essential to make sure that your windows are in good working order.
Single-pane windows are relatively simple to replace, and they typically fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it is harder to remove and replace the panes that were previously in use. In this case you'll need locate some plastic spacers that will help the new pane to fit correctly into the window frame.
If you are going attempt to remove the glass panes yourself, it is essential to wear the proper safety gear such as gloves that are thick and protective eyewear. It is also recommended to lay down a drop cloth before you start working on the glass, so that any fragments of glass fall onto the fabric instead of landing on the floor where they could be trampled on and cause further damage.
After the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to prevent drafts and water from entering the property until a professional comes out and repair the window. It also acts as a barrier, preventing any intruders from gaining entry to your home. If the gap is particularly large, you may want to consider using the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
Upvc windows and doors are a cost-effective energy efficient, durable and long-lasting alternative to timber windows with sash. As time passes, they may be affected by a variety of issues that include sagging. A window that isn't properly aligned can cause problems with light, draughts and even security. It's crucial to act as soon as you notice your uPVC windows are sliding.
Repositioning the hinges could aid in fixing a window that is sagging. To do this, you'll have to open the window so that you can get to the frame. You can then unscrew both the hinges on the top and bottom using a screwdriver, and then adjust them counter-clockwise or clockwise. Close your window to check the fit after you have repositioned your hinges. If you are happy with the fit of your window, you can tighten screws to secure them in place.
If you can't reposition the hinges, you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to loosen. If this happens, it's essential to replace the seal as quickly as you can to ensure that your uPVC windows remain watertight and safe from drafts.
upvc window repair near me handles may also become loose. Most often this is due to screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively simple to fix a loose uPVC handle. You'll first need to close the
window repair near me and perform an experiment fitting. The corners of the sash should be aligned with the casing joint. If it isn't then you can use a screwdriver to loosen the handle and then reverse the mechanism back into its original position.
3. Water Leaks
It is important to take action if you wake up every morning to find a smoky wall and wet floors. Leaks of water from windows can cause structural damage to your home and also hinder your ability to control the temperature of your home. The most common reason for leaks in uPVC windows is that the sealant surrounding the frame is damaged or not present.
It is a fairly easy fix that can be done by any DIY expert. Depending on the severity of the problem is, the old caulking may need to be removed. It is important to remember that when it is about upvc window Repairs (
jinos.com), you should not be tempted to 'over-caulk' as this will only make the area more difficult to clean and could reduce the efficiency of your energy.
Check that any drainage holes have no debris inside them and that the sill pan has been properly angled to allow the water to drain from the window. In more serious instances, you may need to think about replacing the window.
Other indicators of water leakage include rotted sills and the appearance of black spots of mold on the wall near the window. This mold thrives in damp environments and can quickly spread across the house.
It is also important to note that if the leakage originates from the glass of your double-glazed windows it may be more likely to be a problem with the glass seal, rather than the frame or sagging. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are stiff to open, or are loose and blow open in a breeze, it may be hinges that are at fault. Anyone who is a skilled DIYer can fix these in a matter of minutes.
Like all mechanical parts hinges are prone to wear out over time. It is very easy to change the hinges on a window, but it's easier if someone helps hold the frame.
It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
The problem can be caused by opening the window incorrectly or by a poor installation in the factory. Sending us photos via our website will often resolve the problem. We are always happy to give suggestions.
It is also important to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window operate and close more easily. It can also stop corrosion and decrease the chance of sticking. This is recommended to be done at least once a year. WD40 or other solvent-based oils should not be used as they can damage your uPVC windows.
5. Draughts
Draughts can be caused by several different factors. Firstly the hinges, again because of wear and tear, can become misaligned, this causes gaps to develop between the sash and the frame. They can be repaired by giving them thorough clean, however when they're beyond repair, it might be necessary to have them realigned or replaced. The interlock may also become unbalanced. It is located on the hinge's side and could require to be cleaned. In some cases it is possible to replace these.
The next common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and allow air to escape through the gaps. Replacement of these with high-quality weatherstripping can help stop draughts. Replace the upvc windows with low-emissivity glass. This will help to regulate indoor temperatures and decrease draughts.
Another method of reducing draughts effectively is by using a Draught-exclusion device. These are usually fabric tubes filled with a filler that can be hung over your window sill. They will help keep cold air out and keep your home warm and cozy!
The windows made of upvc can keep providing excellent insulation and security for your home with regular maintenance and repairs. It is crucial to realize that all windows have a life span and eventually, they will reach the point when it's more cost-effective to replace them rather than repair them. So, if you are having issues with your upvc windows, it's recommended to seek assistance from a professional immediately.