UPVC Window Handle Replacement
Replacing a damaged or broken window handle is a easy task and, with the right tools, it can be done quickly. It is important to identify the kind of handle you have as well as the size of its spindle before purchasing an alternative.
Older uPVC windows use handles with cockspurs, which have an extension spur that can secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and must be to match when replacing.
What type of lock or handle do I have
There are many kinds of window handles made from upvc and locks, each with its particular advantages and uses. The type of handle you choose will determine whether or not your locking mechanism is effective and if it is easy to open windows. With time and regular use the handles made of upvc on your windows may become damaged and worn out. This makes them less secure and less effective. In some cases, they may even be completely removed. It is essential to fix your window handles made of upvc immediately if you notice them falling off. This will help to prevent potential break-ins and keep your home safe.
It's a task that virtually anyone can perform. You will need some basic tools, but with the appropriate knowledge, it's a straightforward process that should only take a couple of minutes. To begin you'll need to determine the kind of lock and handle you have on your
window replacement and then to find the ideal replacement.
Inline Espagnolette Handles
They are the most popular type of upvc handles and are usually placed on the other side of your window. They have a flat design and have a latch that connects to the locking mechanism of the window frame when turned. Inline upvc handles have spindles that run through the center of the handle and then into the window frame to operate the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and have a distinctive hook-shaped design. Cockspur handles have one screw that secures the handle to the window frame and are not as secure as other types of window handles.
Handles that turn and tilt
The tilt and turn handles differ from other handles made of upvc in that they can be turned to open the window and then tilted to the window to let air circulate. They typically have a 7mm spindle at the side of the handle. They are available in both left and right-handed versions.
It is important to measure the spindle's size prior to purchasing a new upvc handles. There are a few that are the exact same size. To test the length of your handle made of upvc, simply drop something in the middle of the hole, and then measure how far it extends before meeting an obstruction. This is the maximum spindle size that will fit into your windows.
What is spindles?
uPVC window handles operate in a similar manner as doors. By turning the handle, you will be able to operate a latch within the frame. This unlocks the window to allow it to be closed and opened. But, at times, handles can be damaged, particularly when they are frequently used or exposed to harsh weather conditions. You may need to replace the handles on your uPVC window if they are not functioning correctly.
There are several different types of uPVC handles to choose from, including Espag, Cockspur and Spaded handle options. These handles are designed to fit in the uPVC frames in a variety of ways. Each handle utilizes a specific spindle to lock the mechanism to the window. It is essential to determine the kind of handle that is installed on your uPVC windows to ensure that you replace it with a suitable one.
The base of the handle will tell the type of uPVC it is. A snap-in cover should be over the screw that holds the handle's base in position. When you remove this cover you will be able to see the second screw that holds the handle base in position. After both screws have been removed then you should be able to remove the handle from the uPVC.
Once you have removed your uPVC window handle, you have to carefully unscrew the old spindle from the locking mechanism. Take note of the length of the spindle. You will need to purchase a new one that is the same length as the handle that was originally used and the locking device.
The primary issue with window handle problems with uPVC is that the spindle gets worn out and can no longer operate the locking mechanism. This could be due to corrosion, damage caused by frequent use, or an unreliable locking mechanism. If this happens, you'll have to replace both the window handle and the locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I get rid of the old handle?
In the course of time and daily usage, window handles could become damaged or broken and when this happens, it is important to repair them as soon as you can to ensure the security of your home. The good news is that replacing a worn or damaged handle is a easy task that can be carried out in just over a minute and doesn't require any specialized tools.
To remove the old handle, first remove the screw that is located at the base of the handle. Once the screw is removed, the handle will be pulled away from the base. There will be another screw located at the bottom of the handle's base and it can be removed too. After both screws are removed the handle can be removed completely from the base of the window.
Once the old handle is removed, take the new handle and align the fixing holes with the holes present in the window frame. There might be a small cap or sticker on the new handle, so remove these if necessary and then screw the handle in its place. It is essential to ensure whether the handle functions after it is installed. Turn the handle over and make sure that the lock mechanism is working.
Espag handles have an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism in the frame of the
window replacement panes. Cadenza windows have an edge with cut-outs which slot into the lock mechanism while Cockspur handles have an extended nose that hangs over the frame's outer or transom bar cross-member within the window.
After you have installed the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) after the handle is securely fixed. The handle is now ready for use, so try opening and closing the window several times to ensure that it works correctly and securely.
How do I install the new handle?
It's not that difficult to change the handle on your
glass Windows Replacement Near me made of uPVC. The procedure is easy. All you need is a screwdriver and a small amount of patience. The first thing to do is to ensure that the old handle is not locked and then take out any screws that are visible, you can also replace these by screw caps if you need. After the handle has been removed, you need to make an note of the length of the spindle that protrudes from the back of the handle. This is vital because it will determine the kind of handle you will need to purchase.
Espagnolette handles that are made of uPVC are the most sought-after type of handle. The spindle passes through the handle to activate the locking mechanism within the window frame. When the handle is turned it opens the latch on the window, allowing it to open. During regular use and over time, espagnolette handles may be damaged.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature a protruding blade that works with a multiple-point locking mechanism within the window. They are generally more secure than espagnolette handles since they can only be opened from the inside. You can replace them using the same method that you would for espagnolette handles however, make sure that the new handle is angled and not flat.
