Peugeot 308 Key Fob Replacement
Peugeot's 308 might be catching on a bit but it's still appealing. It might not be the most luxurious car in its class - the Ford Focus or Volkswagen Golf will help you stay away from sloping surfaces - but it's still a pleasant and pleasant drive.
We often receive requests from Coded Car Keys to replace peugeot key fobs. The following tips will aid whether the issue is persistent or intermittent.
Water Damage
If you accidentally drop your key fob into an eddy, or it gets wet while kayaking, canoeing or rafting or canyoning the fob is most likely to be damaged by water. Keep your key fob in a dry container whenever you go outside or engage in things that expose it to excessive amounts water.
You'll also want to ensure that the fob is completely dry prior to opening it and reusing it. If you detect any odors from the fob (such as industrial liquid or windshield washer fluid), this is another indicator that it is submerged.
A wet circuit board can cause the battery to lose its charge or even explode. If you're able, if you can, pull your 308 key fob out of whatever body of water it got stuck in then flip the button side down and shake it out as much water as you can before opening the case. After you open it, remove the battery and wipe the circuit board using a cotton swab dipped in 90 percent isopropyl alcohol.
Other reasons why your Peugeot 308 remote entry keyless system may not work could be due to a dead coin-cell battery or receiver module malfunction, signal interference or a malfunctioning chip. If none of these are the problem you can restart the system by removing the 12 volt battery from the car for 15 mins.
Dead Coin Battery
Peugeot cars come with remote start technology which allows drivers to start their car from a distance, allowing them to warm up or cool down the car before they get in. This feature is extremely beneficial, especially during winter's cold and chilly months. The remote start system can not function due to a variety of reasons, including the dead battery in the coin-battery.
A coin-shaped battery that is located inside the key fob has a lifespan of between two and four years, depending on how often it's used and where it's purchased. Its use-by date is typically printed on the packaging or written in the manual.
If the key fob is no longer working after being exposed to clean tapwater, remove the battery and clean the electronic chip with a paper towel soaked in isopropyl ethanol. Then, dry the chip thoroughly before replacing. If the key fob has been exposed to salty or soapy water, it could have caused the chip to become damaged. It is recommended to replace it.
If you are not sure the battery is defective You can test its voltage with an instrument set to the car's voltage range, and connect it to the plus and minus terminals. The voltage should be around 12 to 13 volts, but if it is lower, the battery should be replaced. You can also attempt to reset the onboard computer by disconnecting the battery at 12 volts for a couple of minutes, and then reconnecting it in reverse order (positive cable first, then negative). The engine should now start.
Faulty Receiver Module
If you don't see "Key Detected", it could be the receiver module not working properly. It is the part that transmits an alert when the key fob is activated. It also functions as an alarm and blocks the vehicle from starting without the correct key.
It could be due to many factors, including water damage or simply ageing. If the electronic chip inside your Peugeot 308 keyfob is damaged due to dirty tap water it could be due to the fact that the keyfob was contaminated with it. In this case you'll need to remove the device apart and clean it thoroughly using isopropyl or electronic cleaner. Once the battery is dry you can try it again.
If the issue continues to persist you're probably in need of a idea to see a local
peugeot 207 key specialist or locksmith. They can use a diagnostic tool in order to pinpoint the issue and repair it.
It is stressful to lose your
Peugeot car key. A certified auto locksmith will be able to solve the problem within minutes. They can program your vehicle and cut a brand new, functioning key for you. Click here to find locksmiths near you.
Faulty Electronic Chip
The electronic chip inside the Peugeot 308 key fob is an vital component of the remote control system. If the chip is damaged, you may have problems starting your car or receive a message that says "anti-theft". In this case, the only solution is to replace the key. Luckily, professional auto locksmiths are able to provide this service in the shortest time.
The chip inside your Peugeot 308's key fob may fail due to different reasons, such as sweat, water damage, or dirt. If your Peugeot key fob has been exposed to soapy or dirty water, it needs to be cleaned promptly. You can use a paper towel and isopropyl ethanol to clean the electronic component. After that, allow the battery to dry completely.
Radio interference can cause a key fob to cease working. This is usually caused by other devices operate on the same frequency as your Peugeot keyfob. It could also be caused by bad weather or objects that are in the vicinity of the vehicle. It is recommended to see a Peugeot dealer if you have this issue.
The Peugeot Key Fob 207/308 is very delicate and requires special care. It is not recommended to drop it or throw it around. If you lose something,
Peugeot car key try to find it as soon as possible. You can reset all the on-board computers by disconnecting the battery that is 12 volts for a few minutes. Unplug the negative cable prior to the positive.