Peugeot 208 Key ReplacementPeugeot 208 key replacement is best left to auto locksmiths with experience who have the appropriate tools and know-how. They will be able to create and program new keys faster than a dealership would and at a lower price.
If your key fob has stopped locking or unlocking your doors, it is likely due to a dead battery in the coin. There are also other reasons that the key could be malfunctioning.
Dead Coin Battery
A dead battery in the coin compartment will hinder your Peugeot 208 from locking or unlocking, and won't start the engine. In this scenario you'll need employ the alternate method of starting as described in your vehicle's owner's manual.
The spark plugs might also be worn out. The spark plugs are responsible for igniting the fuel that starts the engine. However they have a finite lifespan. If they aren't utilized enough to last, they'll eventually fail.
There is a simple solution for this issue. Check the voltage of the battery using a multimeter. If it's less than 11.5 volts it is time to replace it. It is also essential to clean the contacts of the battery in the event that it is damaged by corrosion. This can be done by removing the rubber cover from the two terminals on the battery and then using a wirebrush to clean any corroded battery parts. Then, reconnect the positive and negative pole cables.
Water Damage
If your 208 won't start and the battery has not gone flat, you should check the spark plugs. It could be that they are dirty and
peugeot spare Key don't spark. This is easily fixed by cleaning the spark plugs in a workshop.
Peugeot automobiles use a key with a transponder that is compatible with the immobiliser. This ensures that only a valid key is able to turn the engine. If the chip inside the Peugeot key is damaged, then it will not transmit the proper signal to the vehicle.
Water damage is the most common cause of this issue. This is most common in colder climates. the vehicle might have been exposed to rain or snow. In this case, you need to contact a trusted locksmith who will have the tools and equipment needed to change the key's programming. They will also have the most up-to-date technological know-how and the equipment required to create the Peugeot 208 smart key. The process shouldn't last more than 15 minutes.
Contacts of the battery may be damaged.
peugeot 307 key replacement changed from the carbon-encased transponder chips to an entirely new type of chip that uses electronic components within a circuit board. This new system works great when it's brand new, but over time the circuit boards start to wear out and
Peugeot spare Key stop functioning properly.
This can stop the immobiliser from triggering so that your vehicle won't start. Contact a Peugeot specialist or a locksmith, if this is the situation.
The most frequent issue is when the battery inside the key fob begins to fail. This causes the blade of the key to stop feeding into your lock. A locksmith from your car will replace the battery, and then cut a fresh blade for you. This is a simple solution.
Faulty Receiver Module
If your Peugeot key fob has stopped working after dropping it on the floor, or being exposed to a sudden downpour or accidentally washing it the wrong way, it could be due to a faulty receiver module. The receiver module is responsible for transmitting radio signals to the onboard computer that regulates the central locking system of your Peugeot vehicle.
The rubber seals on the key fob prevent water from reaching its electronic chip. However, prolonged exposure to water can be able to penetrate these seals and cause damage to the chip. The high salt content of the ocean water or pool can cause damage to the key fob if it is submerged.
If your
Peugeot spare key fob stops working, you'll need to have the module replaced. This can only by done by a Peugeot specialist or expert auto locksmith. Peugeot keys like other cars are secured by an immobilizer system. This requires the correct codes to start the car. It is for this reason that you should only trust a Peugeot locksmith to design and program the replacement.
Computer on-board is not working properly
The on-board computer in your Peugeot is responsible for various systems inside your car, including power windows and airbags. When something goes wrong in these systems, it will typically show a code that identifies the problem. This code is stored inside the system and stays there until the problem is solved. This can often mean that the on-board computers to be replaced.
The most common cause of the warning light of the airbag to turn on is corrosion or loose connections in the sensor. This can occur due to wear and tear, aging or exposure to salt and moisture. It is important to have this issue resolved as soon as possible, as the airbag malfunctioning could be dangerous in the event of an accident.
If your Peugeot is showing a card that is not being detected error, then the battery inside the key fob could be dead or weak. This will prevent the key fob from transmitting a signal that will disable your vehicle's immobilizer. Try this by pressing the unlock key on the key fob and then trying to start your vehicle. If this doesn't work then the battery on the key must be replaced.
