Ghost Immobiliser Installation
Add a ghost immobiliser to your vehicle to protect it from thieves. Our TASSA-certified system guards against key cloning, hacking, and also vehicle immobiliser bypass.
The system is hidden in the wiring loom of your vehicle It is inaccessible to anyone who is looking. It works by creating a pin code push sequence through buttons already on the steering wheel doors, door cards, and the centre console.
No circuit cuts
It's not surprising that owners want to protect the vehicle they have put so much effort into buying. However, traditional security devices like alarms and wheel locks could easily be cut off or bypassed by thieves. A ghost immobiliser however is a highly efficient solution that operates in a quiet manner and isn't easily recognized by modern day thieves.
Ghost immobilisers are hidden device that connects to the CAN data network of your vehicle to shut down the engine without the use of radio frequencies or key fobs. It communicates with your vehicle's ECU via buttons already on the steering wheel, dash and door panels, to create an unique pin code that only you know. The code can be changed at any time, and can contain up to 20 digits based on your preference. It also has an emergency code that you could use in the event that you forget your PIN.
The ghost immobiliser is helpful to prevent a relay box in your home from transmitting the signal from your
car ghost immobiliser key, which will open the doors and begin your vehicle. It can also block sophisticated methods to steal your vehicle, like OBD port hacking. The device is small, weatherproof and difficult to spot. It's also hard to tamper.
Another benefit of the ghost immobiliser is that it can be installed in your car without any permanent marks. This makes it ideal for those who intend to resell their car in the near future. It's also quicker and easier to install when compared to a factory-fitted model.
The Autowatch Ghost, a cutting-edge new-generation device, prevents thefts of cars using contactless technology by connecting to the CAN network of a vehicle and using the existing buttons to generate an unique PIN code. This is a hidden system that can be installed without cutting any wires and does not require any additional key fobs. It can also be connected to the original ECU of the vehicle, thus preventing thieves from using a different key. This system is TASSA certified and is linked to an International Security Register, allowing owners to have peace of mind knowing their vehicles are safe from theft.
No scanning with RF
If you have invested a lot of time and money into the customisation of your vehicle, you'll want to protect it from theft. One method to do this is by installing an immobiliser, which will stop your engine from running until you enter a unique PIN code. Using the buttons on your steering wheel and dashboard, you can create an up to 20 digits long that is only known by you, making sure that only you are able to drive your vehicle. You can also set up a valet and service mode that allows you to temporarily start your car without having to enter the PIN code. This will permit technicians to work on your vehicle without you being present. This feature is great for people who want to save time and make their lives easier.
Ghost immobilisers, which are new generation device connects to the CAN data network of your vehicle and uses buttons on the dashboard and the steering wheel to set a PIN number. It is designed to blend into, as it does not emit any noise or LED indicators. It can be put in anywhere on your vehicle, without impacting the appearance of your vehicle.
This stealthy system has been approved by TASSA and can lower the cost of insurance. It also has the ability to track,
autowatch Ghost Immobiliser fitting which can locate your vehicle even if it's been stolen. This is particularly useful if have a costly or rare vehicle that you've invested lots of time personalising.
The Autowatch Ghost can be used in conjunction with an iPhone application that allows you to remotely start your vehicle in the event that you forget your PIN or are not able to access the vehicle due to some reason. This feature is great for those who need to take your kids to school or go on errands, but don't want having someone else drive your vehicle. It is also helpful if you need to take your vehicle in for servicing or repair.
The Ghost is unique in that it does not transmit or detect radio frequencies, so it is undetectable by thieves who employ RF scanning and code grabbing technology. It is also able to protect your car from key copying and ECU swapping as well as other typical methods of theft from cars.
There is no key to cloning
Ghost immobilisers are a great way to protect expensive cars and stop key cloning. They prevent your vehicle from starting until a PIN code has been entered with the regular key fob. This makes it very difficult for thieves to rob your vehicle and can also deter them from doing it initially. This is a great idea if you've spent lots of time and money in personalising your vehicle, or own a rare or expensive model.
These immobilisers are connected to the vehicle's CAN data network onboard and are completely concealed, which means their presence isn't evident. It is also difficult to identify using radio frequency scanning technology or code grabbing. This means a thief would need to wait longer to take your vehicle.
To bypass the system a thief must be aware of the pin code and the location of the
ghost immobiliser review. The pin code will be specific to you and may be changed as often as you want. The pin code is simple to remember, but mathematically unattainable for someone else to understand. The engineer will also have provided an emergency pin number in the event that you forget the pin.
The Ghost CAN bus immobiliser is weatherproof, and can be installed in any location of your vehicle. It is compatible with all vehicles and fully customisable to match the look of your car. It is also very easy to use and affordable. You can even transfer the device to a different vehicle if you change vehicles during the course of ownership, providing that the new vehicle is compatible with it.
The immobiliser on the CAN bus is compatible with a number of other security features. It is able to, for instance detect damage to the vehicle and alert the owner. It also can stop the engine in the event that the vehicle is damaged. The system also protects your vehicle from key cloning and hacking. It can also detect vibrations and contact with the vehicle. In addition, it can notify the owner that the vehicle has been moved.
No OBD port hacking
Ghost is a hidden device that is connected to the CAN data network of your vehicle. This stops thieves from trying to hack into your vehicle to disable your alarm, deactivate your key fob, or code new keys. This technology is a step up over the methods that were used by thieves to steal vehicles in the past. The CAN data network also ensures that the system won't be affected by disconnecting or changing your battery.
The
autowatch ghost immobiliser Fitting Ghost, the first non-detectable CAN bus immobiliser aftermarket in the world, protects against key-cloning, hacking and replica car theft. It does not utilize LED indicators or key fobs. Instead, it utilizes the buttons on your steering wheel, console and door panels.
Modern thieves can use diagnostics to detect circuit breaks in your vehicle. They can bypass immobilisers that require a large amount of wiring or are integrated into the wiring. The Ghost is weatherproof and does not require any additional wiring. It is not detected by professional diagnosis tools. It can be installed even on vehicles with anti-theft devices.