UPVC Window Handle ReplacementReplacing a damaged window handle is a easy task and with the right tools it can be done quickly. However, it is essential to know the type of handle and the spindle length before buying a replacement.
Older uPVC windows have cockspur handles for windows. They have an extension spur that can secure a wedge-shaped cockspur striker plate. They can be left- or right-handed, and must be compatible when replaced.
What kind of lock or handle do you have? I have
There are many window locks and handles made from upvc, each with its particular advantages and uses. The type of handle you have will determine how easy it is to open your windows and if the locking mechanism works according to the plan. With time and regular use, upvc window handles can become damaged or worn out, rendering them less secure and effective. In some cases they might even fall off completely. If you notice that your upvc window handles have fallen off, it is important to fix them as soon as you can. This will prevent possible break-ins, and keep your house secure.
It is a good thing that replacing your window handles made of upvc is a relatively simple task that can be done by almost anyone. With a few basic tools and the right information it's a straightforward process that shouldn't take longer than a couple of minutes. To begin you must determine the kind of lock and handle you have on your window made of upvc and then find the perfect replacement.
Inline Espagnolette Handles
They are typically located on the outside of the window. They are flat in design and feature a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles have an elongated spindle that runs through middle of the handle and into the window frame in order to operate the latch.
Cockspur Handles
They are typically found on older uPVC window frames. They have an unusual hook-shaped design. Cockspur handles are secured to the frame of the window by only one screw and are less secure than other types of window handle.
Handles that can tilt and turn
The tilt and turn handles are different from other handles made of upvc in that they can be rotated to open the window and then lowered into the window to ventilate. They feature a 7mm spindle at the back and are available in right-hand and left-hand versions.
It is essential to know the spindle size when buying replacement handles made of upvc. Not all of them are exactly the same size. To determine the length of your upvc handle simply drop something into the middle of the hole and measure how far it extends before it comes into contact with an obstruction. This is the maximum spindle length that will fit in your window.
What is spindles?
uPVC window handles operate in a similar way to doors, by turning the handle to activate a latch inside the frame. The window can then be opened and closed. These handles can be damaged,
Upvc window handle replacement especially if they're frequently used or exposed to harsh conditions. This can leave you needing to replace your uPVC handles on windows since they might not be able to operate the
double glazing window replacement in a proper manner in the future.
There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed to fit into the uPVC frames in a variety of ways and each handle type has a particular spindle that is used to secure the mechanism to the window. This is why it is crucial to know the type of handle you have installed on your uPVC window to get the correct replacement.
You can determine the type of uPVC handle you have by looking at the base section of your handle. There should be a "snap-in' cover over one screw which holds the handle base in the correct position. After removing this and you'll be able to observe the second screw that holds the base of the handle in position. After both screws have been removed and you are able to take the handle out of the uPVC.
Once you have removed the uPVC window handle, you have to carefully unscrew the old spindle from the locking mechanism. Make note of the length of the spindle as you'll need to make sure that you purchase a replacement that has the same length as your original handle and locking mechanism.
The spindle wears down and is unable to operate the locking mechanism. This could be due to damage caused by constant use or a loosening of the locking mechanism, or even corrosion that occurs over time. If this happens, you'll have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.
How do I get rid of the handle from the previous one?
Window handles can be damaged or destroyed over time. It is important to repair them as quickly a possible to ensure your safety. The good news is that replacing a worn or damaged handle is a easy task that can be completed in just over one minute and doesn't require any specialized tools.
The first step to remove the handle that was previously used is to remove the screw located at the top of the handle base. After the screw is removed, the handle can be pulled away. A second screw is located at the bottom of the handle. This can also be removed. After these two screws have been removed, the handle will be removed from the window's base.
After removing the handle, align the fixing holes of the new handle with the holes that are already in the window frame. There may be a tiny sticker or caps on the new handle, so take them off them if needed and then screw the handle into place. Once the handle is set, it is essential to check whether it functions by turning the handle and making sure that the lock mechanism activates.
Espag handles come with an elongated spindle that extends from the handle and slots into a multipoint locking mechanism inside the frame of the
window replacements. Cadenza windows feature a blade with cutouts that fit into the lock mechanism. Cockspur handles are long and hang over the frame that surrounds the window or the transom crossmember of the bar.
Once you have the new handle in place, you can insert the spindle into the window lock and then tighten it. Once the handle is securely fixated, replace the'snap in' cover and the screw cap (if appropriate). The handle is now ready for use to use, so try opening and closing the window a few times to ensure that it is working well and securely.
How do I fit the new handle?
Switching your uPVC window handle isn't difficult, and the process is actually very simple. You only need a screwdriver and a bit of perseverance. The first step is ensure that the handle you have previously used is not locked and then remove any screws that are visible. you can also replace them with screw caps if required. After removing the handle, you'll need to take note of the length of the spindle that extends from the back. This is important because it will determine the kind of handle you will need to buy.
Espagnolette handles are the most commonly used kind of handle that is used on uPVC windows. They have a spindle which is connected to the handle and operates a locking mechanism within the frame of the window. The handle opens the latch and allows the window to open. With time and regular use, espagnolette handles could be damaged or destroyed, making it necessary to locate an alternative.
Cadenza handles are a type of uPVC handle that is commonly used in tilt and turn windows. They have a protruding blade that operates the multipoint locking mechanism inside the window. They are generally more secure than espagnolette handles as they are only accessible from the inside. You can replace them using the same procedure as you would for espagnolette handles however, make sure that the new handle is not angled and flat.
