How to Replace a UPVC Window Handle
Don't be worried in the event that your upvc window handle is broken. Replacing a window handle made from upvc is a relatively simple task and can be completed in a matter of a few steps.
It doesn't matter if you have an in-line or a crank espagnolette window handle they all have a square spindle that protrudes out of the back plate. This spindle is then placed into the locking device.
Determine the lock type and handle
Over time windows' handles or locks can get damaged and lose functionality. The good news is that this can usually be repaired without replacing the entire window unit made of uPVC. The first thing to do is identify the type and size of your handle and lock. This will help you identify the replacement parts you need.
Identifying the type of handle is done by looking at the base of the handle. There will be a screw or pin holding the handle to its base. If the screw is missing it could be a sign the handle has split from the base. If the handle has been split in the middle and is no longer able to grip the spindle, this could be a sign that it is in need of replacement.
There are many different types of uPVC window handles, but the most common is the Espag handle. They are typically fixed using two bolts, and the spindle engages the locking mechanism of the window frame. These handles are typically used on tilt and turn uPVC windows.
Another type of uPVC window handle is the Cockspur handle. They're similar to Espag handles, but have smaller projections from the frame. These handles are typically used on older uPVC windows.
Finally, there are also Venetian window handles, which are similar to the Espag handle but they have an elongated base that allows them to be placed to the frame. These handles are a good option for homeowners who want an elegant handle that can blend in with their uPVC frames. They are also available in a large range of colours to match any style.
Measure the spindle
Before you purchase a new handle, it's crucial to understand how the previous one handle is attached. This will tell you whether it's tight enough or too loose and if it's able to fit into the window frame. This can be accomplished by identifying the type of handle and determining the spindle's measurement. The spindle is a metal shaft that connects your handle to the lock in the window frame. It's available in a variety of sizes, with the current industry standard being 8mm. Older handles could have a cross-section of 9mm, therefore you'll need to take measurements of your old handle to make sure that you have the correct size replacement.
There are several types of window handles, however the most commonly used are inline Espagnolette and cockspur handles. They operate an locking mechanism within the window using shootbolt rods which secure the window when it is closed. Depending on the type of handle, they are held in place using screws or pins.
You can buy Upvc handles replacement on the internet or in many DIY stores. They are available in a variety of finishes, and can be used to make windows that are new or replacement. They can also be key-locking or fire-escape non-locking for extra security.
To remove the old handle simply open the window to the door and unscrew all the screws holding it in place. Store the screws in a container to avoid damage. After the screws are removed, gently pull out the handle and measure from the base to the top of the spindle. This will provide you with the information needed to buy the right replacement. The spindle of the handle is the steel shaft that connects it to a gearbox for locking in the window frame.
Remove the old handle
The replacement of the handle of a uPVC window handle is a simple task that typically takes no more than five minutes if you have the proper tools. The first thing to do is determine the size and type of the lock or handle. This will help you determine the best replacement. After that, measuring the spindle will help ensure that the new handle is a perfect fit. The handle that was used previously needs to be removed and replaced with the new one.
The majority of uPVC handles are inline Espagnolette handles, with central spindles that slot into the locking mechanism of the window. These are generally easy to remove, but you may have to apply force when they are stuck. There are typically two screws that keep the handle in place, which can be removed using the help of pliers or a screwdriver. Depending on the type of handle you have, you may also need to remove any pins holding it in place.
Once the screws are removed Once the screws are removed, you can remove the handle. The top of the base plate will be visible when the handle is in an open position, revealing two screws you can remove. There's also small silver or another color sticker that must be removed if in place.
You can now put into the new handle using the screws from the previous handle. The screw holes should be aligned on the window to the holes in the handle. After you have done this then
Replace upvc window handle the cap screws. Test the new handle. Changing a uPVC window can be a quick and simple task, but you need to ensure you complete it in a proper manner.
Fit the new handle
If you've been able to successfully take the handle off the frame, now is the time to put in your new handle. Start by locating and removing the screw covers using your screwdriver. Once they are removed, put them in a safe location and proceed to the next step.
Next, place the new spindle inside the handle by aligning it with the hole already in place and screwing it in. Align the holes on the handle with the holes in the window frame. Make use of a screw that is the same size as the one used previously.
The uPVC Espag handle comes equipped with a spindle of 7mm square that rotates the lock mechanism of the window. This type of handle is utilized in the majority of modern
upvc replacement window handles Windows. uPVC Cockspur (also known as the name Cotswold) handles feature an extended, curved nose that locks onto the frame's outer edge or cross member of the transom bar. They are usually found on older uPVC Windows.
Once the new handle has been put in place, it's important to ensure that it operates correctly by locking and unlocking the window several times. If everything goes to plan,
Replace Upvc Window Handle your replacement uPVC window handle should be securely attached and operating smoothly. If not, the steps above will allow you to identify any issues and fix it quickly. Bridgewater Glass can help you if you're having problems with your uPVC handles or other glazed home improvements. Our glaziers are certified to repair or replace various window frames and handles making us a good option for your double glazing needs.
Test the new handle
Over time, uPVC handles can be damaged and worn out. This can leave them less secure and efficient, so it's important to replace them as quickly as possible. This is also a great idea to do when you are upgrading your windows. Change your lock mechanism and handle will help to maintain the integrity of your new windows.
There are a variety of styles of uPVC window handles. Some are fixed with screws or pins while others are fitted with blades that slot into the lock mechanism. Each type has its own method of replacement, and it's important to know what kind you've got before you begin working on it.
Espag window handles are the most common type, and are usually used on newer uPVC windows. These handles have a spindle that extends from the handle and into the gearbox for locking, and when you open the window it triggers the locking mechanism. They're also simple to remove, but you should take care not to damage the mechanism or the handle while taking them off.
Cockspur handles are another alternative to uPVC window handles.