Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will safeguard your prized item from theft. It is discreet and doesn't require additional key fobs.
The device makes use of the buttons on your vehicle (steering wheel doors, door panels and centre console) to create a unique changeable pin code sequence up to 20 presses long. This will then allow your vehicle to begin.
Simple PIN Code Change Process
With the growing rate of vehicle theft, many owners are looking to improve their security. There are a variety of security products that are available including tracking systems, immobilisers and alarms. They're not all equally effective in protecting your vehicle. While a tracking system can assist in finding your car in the event of theft, it will not prevent the crime from occurring in the first place. Immobilisers, in contrast are exactly what they state on the tin: they disable your car's motor to prevent it from being started. The Autowatch Ghost is one of the most sophisticated options available, making it almost impossible for thieves steal your vehicle.
Utilizing the buttons already in your car The ghost device is able to create an exclusive sequence that has to be entered before the engine will start. This can be done using the heater, window or indicator stalk buttons. There is also a mobile application that can be used as an emergency PIN override, allowing the driver to operate their car without the button sequence. This is a great solution if you want to give your car to valet parking or servicing. The immobiliser will stay active.
The Ghost is a very unique and ingenious device that is used in conjunction with the buttons in your vehicle rather than being a standalone unit. It's not just an effective deterrent to vehicle theft and
ghost immobiliser problems vandalism, but it can be used to secure any future vehicles you own. This makes it a much better investment than a traditional wheel lock.
Weatherproof, tiny device
The Autowatch ghost immobiliser problems (
simply click the following webpage) immobiliser is a sophisticated security device that protects your vehicle from key cloning, hacking & ECU swapping. It is a small weatherproof device that communicates with the ECU of your vehicle directly through the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been thoroughly tested to ensure that it is compatible with all vehicles. It also is resistant to jamming devices which are a typical method used by car thieves to bypass immobilisers.
The advantage of using CAN data is that it runs silently in comparison to conventional systems. It's not detected by sophisticated RF scanning or code-grabbing technologies and is also unrecognizable by traditional diagnostic tools. The Autowatch ghost doesn't emit LEDs, but instead utilizes the buttons on your vehicle, such as the steering wheel or centre console panels to create a unique, changeable disarm sequence. The sequence can be extended to 20 presses for extra security. The iPhone app is limited to one connection, using an individual pairing code for the
Ghost 2 immobiliser. All communication between the two devices is secured.
The Ghost also prevents car thieves from adding a new key or replacing the ECU to bypass the immobiliser and start the engine. It will only allow the engine to run when the correct PIN code is entered. It can also be put in valet/service mode to allow for temporary operation (with defined parameters like a 30mph speed limit) to allow you to give your car to a valet service or for servicing without the need to enter a PIN.
Tested for each vehicle
The Autowatch Ghost is the first aftermarket immobiliser CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device intercepts electronic signals that block the system of your vehicle from performing its normal start-up routine until you input a custom passcode. The system can be activated or deactivated through your smartphone's app, without the need for additional wires.
The standard factory immobilisers work by using a transponder, which is embedded in the key. This transmits a signal to the ECU. If the correct code is transmitted, the car will start, but if a transponder is replaced by one from a different vehicle, the immobiliser cannot recognize it. This allows the vehicle to be stolen and then started. The Ghost immobiliser has been developed by a South African company at the top of the line in vehicle security technology. It shields you from hacking or key cloning and even key theft. The only way that a burglar could steal your car is physically towing it away and even then, they would not be able to drive it.
Ghost makes use of buttons in your vehicle, such as the indicator stalk, the steering wheel, and the door panels, to create an individual PIN code which must be entered in order to use your vehicle. This is done without any extra hardware, such as keys fobs. It can take up to 20 presses. It is also undetectable to diagnostics equipment and does not transmit radio frequency signals, so thieves are unable to make use of sophisticated RF scanning or code-grabbing technology to discover that the security system has been installed.
Ghost is harder to remove than car alarms that require disarming with several buttons. This makes it a great alternative to a GPS tracking device that can be used to locate your vehicle after it's stolen.
Emergency PIN code override
You don't need to go far on social media to see stories or even videos of vehicles that have been taken by car thieves employing the latest technology tools available to them. This includes key-cloning devices and hacking devices that allow them to start your vehicle without the original key fobs.
Our Ghost immobiliser combats this and gives you an additional layer of protection to stop your vehicle from being stolen when it is targeted by thieves. It creates a unique pin code when pushing the buttons on your steering wheel, door panel, and centre console. This unique PIN is entered along with the original key fob to stop the engine from beginning. The unique override pin can be found on a black plastic card that you receive following the installation. It is easy to remember since there aren't any LED indicators.
The device is hidden within the vehicle's wires and doesn't emit any radio signals, so it isn't able to be recognized by thieves with diagnostic software that can identify the security system you have installed. This makes it a great alternative to an alarm.
In contrast to other security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependant). This allows them to disable the vehicle completely with a digital block of commands that is sent to both the ECU and
Ghost Immobiliser Problems the engine.
It is also possible to connect an analog immobiliser, alarm or tracker to these systems, but this has to be specified before installing the device. They are also compatible with valet/service modes and an excellent alternative to a tracking device if you take your car into the dealer to address an electrical issue.
Service/Valet mode
In recent years there has been an increase in the number of vehicles being stolen with no owner's keys. It's now more easy than ever to steal your pride and joy thanks to the availability of key cloning tools & door lock picks. We've developed the Autowatch Ghost Immobiliser to combat this. It stops your car from being driven, even if your keys have been copied.
It connects directly to your vehicle's ECU (Engine Control Unit) through the CAN data circuit. It's completely silent because it does not utilize radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device.