Protect Your Pride And Joy With The Ghost Immobiliser
Protect your pride & joy against theft by using the
ghost car immobiliser Immobiliser. This system is discrete and does not require additional key fobs.
The device makes use of the buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence that can be up to 20 presses long. This will then allow your vehicle to begin.
Simple PIN Code Change Process
With the rising rate of vehicle theft, a lot of owners are looking to upgrade their security. There are many different types of security gadgets that are sold aftermarket that range from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking device can assist you in locating your vehicle if it's stolen, but it will not stop the crime. Immobilisers, in contrast, do exactly what they state on the tin - they shut off your car's engine so that it isn't able to be started. The Autowatch Ghost is one of the most advanced options available, making it nearly impossible for thieves steal your car.
The ghost device utilizes the buttons on your car to create an unique sequence that needs to be entered to allow the engine to start. This can be accomplished using the indicator stalk, window or heater buttons. There is also a mobile app that can be used as an emergency PIN override, allowing the driver to operate their vehicle without having to use the button sequence. This is a great option for those who want to offer your car to valet parking or for maintenance. The immobiliser remains active.
The Ghost is a unique and
Ghost Immobiliser Problems innovative device which is used in conjunction with the buttons on your vehicle rather than being a standalone device. This means that it is not just a highly effective security measure against theft from your vehicle but it can also be transferred over to any future cars you own, making it much more of an investment than a traditional steering wheel lock.
Weatherproof tiny device
The Autowatch Ghost Immobiliser is a sophisticated security system that protects your car from key hacking and cloning. It also stops ECU swapping. It is a tiny weatherproof device that connects with the ECU of your vehicle directly over the CAN bus, causing it to shut down the motor. It can be installed in the vehicle without the need for extra wiring and has been extensively tested to make sure it is compatible with all vehicles. It is also resistant against jamming devices which are a typical method used by car thieves to get around immobilisers.
The advantage of CAN data over traditional systems is that they operate silently. It isn't detected by sophisticated RF scanning and code-grabbing technologies, nor can it be recognized by conventional diagnostic tools. The Autowatch ghost does not produce LED indications and uses the buttons in your vehicle like the steering wheel, centre console or door panels to create a unique, customizable disarm sequence. The sequence can be extended to 20 or more presses to provide additional security. The iPhone app allows only one connection, and comes with the Ghost's unique pairing code. the Ghost. All communication between the two devices is encrypted.
The Ghost will stop car thieves from putting in an ignition key replacement or replacing the ECU in order to bypass the immobiliser. The engine can only be started if a valid PIN code is entered. It is also possible to put it in valet/service mode to allow for temporary operation (with set parameters such as 30mph speed limit) to allow you to transfer your vehicle to a valet service or for servicing without the need to enter a PIN.
Every vehicle is tested
The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and to the engine control unit (ECU). The device snoops on electronic signals to block the system of your vehicle from performing its normal startup routine until you input the passcode you have created. The system can be turned off or on via your smartphone's app without the need for additional wires.
The standard factory immobilisers function by using a transponder, which is built into the key. This transmits a signal to the ECU. If the correct code is transmitted, the car will start however if the transponder is swapped with one from another vehicle the immobiliser will not recognise it. This makes it possible for the vehicle to be stolen and started. A South African company that is at the forefront of vehicle safety systems technology created the Ghost immobiliser. It guards you against hacking or key cloning and even key theft. Only by physically towing your car away from thieves could they take it away and not be able drive it.
Ghost uses buttons on your vehicle, including the indicator stalk, steering wheel, as well as the door panels, to create unique PIN codes which must be entered in order to use your car. This is done without the need for additional hardware like key fobs and can last up to 20 presses long. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals so thieves are unable to make use of sophisticated RF scanning or code grabbing technology to detect that a security system has been installed.
In contrast to the physical devices that prevent theft, such as clamps or wheel locks, Ghost is hidden within the vehicle to ensure that it can't be removed or disabled by thieves. It's also harder to remove from a car alarm which requires disarming with an action sequence. This makes it a fantastic addition to a GPS tracking device that can be used to locate your vehicle after it's stolen.
Override of emergency PIN code
You do not have to look far on social media sites to find stories or even videos of vehicles that have been stolen by car thieves using the latest technology tools available to them. This includes key-cloning and hacking tools that allow them to start your vehicle without the original key fobs.
The
Ghost Immobiliser Problems immobiliser was designed to combat this and offer an additional layer of security to protect your vehicle from being targeted by thieves. It creates a unique pin code when pressing the buttons on your steering wheel, door panel, and the centre console. This unique PIN has to be entered together with your original key fob in order to stop the vehicle from beginning. The unique override PIN is on the black card you will receive following installation. It's easy to remember because there are no LED indications.
The device is hidden within the wiring of your vehicle and does not emit radio signals. This means it can't be detected by diagnostic software that can determine the security system you have installed. This makes it an excellent alternative to an electronic device for tracking.
Contrary to other security systems which rely on a relay in the engine bay, these immobilisers using CAN communicate via databus (brand dependent) with the ECU and BCM of the vehicle. This allows them to shut down a vehicle completely by sending a digital block to the ECU and engine.
These systems can also be linked to a separate analogue alarm, immobiliser or tracker. This should be decided prior to installation. They are also fully service/valet mode compatible and are a great alternative to a tracker when you are taking your car in for repair at the dealer.
Service/Valet mode
In recent years, there has been a increase in vehicles being stolen with no owner's keys. It is easier than ever to take your joy and pride due to the availability of key cloning devices and door lock picks. To combat this we are now offering the Autowatch
ghost immobiliser fitting immobiliser that prevents your vehicle from being driven even if your keys have been cloned or your vehicle was stolen.