UPVC Window Handle Replacement
Replacing a damaged window handle is a easy task and, with the right tools, it can be done quite quickly. However, it is essential to identify the handle's type and spindle's length prior to purchasing a replacement.
Older uPVC windows feature cockspur window handles which have an extension spur that can lock over a cockspur wedge striker plate. They can be left or right-handed and must be to match when replacing.
What kind of lock and handle do I have?
There are many kinds of window handles made of upvc and locks, each having their own benefits and purposes. The type of handle you are using will determine the ease to open your windows and whether or not the locking mechanism functions as intended. Over time and through regular use, window handles made of upvc are prone to wear or damage. out, rendering them less secure and effective. In some instances they could even be completely removed. It is important to repair your window handles made of upvc as soon as you notice they are falling off. This will stop possible burglaries and will keep your home safe.
It's a task that virtually anyone can perform. With a few basic tools and the right knowledge it's a simple procedure that shouldn't take less than a few minutes. To begin, you will need to identify the type of lock and handle you have on your window made of upvc to help you identify the best replacement.
Inline Espagnolette Handles
These are the most common type of upvc handles and are typically located on the side of your window. They are flat and come with an open latch that is connected to the locking mechanism of the window frame. Inline upvc handles have spindles that run through the center of the handle, and into the frame of the window to operate the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and feature a distinctive hook-shaped design. Cockspur handles are fitted with a single screw that is used to secure the handle to the
window replacement near me frame and are not as secure as other types of window handles.
Handles that can tilt and turn
As opposed to the other upvc handles, tilt and turn handles can be rotated to open the windows and the handle can be tilted to the side to let air flow in. In general, they have a 7mm spindle on the side of the handle. They are available in both left and right handed versions.
It is essential to know the size of the spindle when purchasing a replacement handles made of upvc. Not all of them are exactly the same size. Drop something into the middle of the hole to test the length. This is the maximum spindle size that will fit your windows.
What is the spindle?
uPVC
window replacements handles work similarly like doors. By turning the handle, you are able to open a latch in the frame. This opens the window so that it can be closed and opened. However, sometimes handles can be damaged, particularly if they are regularly used or exposed to extreme weather conditions. You may need to replace the handles on your uPVC window if they're not able to operate it correctly.
There are a variety of uPVC handles to choose from, including Espag, Cockspur and Spaded handles. They are designed in a variety of ways to fit into uPVC frames. Each handle style uses an individual spindle to lock the window mechanism. This is why it is crucial to identify the type of handle is installed on your uPVC window so you can find the right replacement.
The base of the handle will tell you what kind of uPVC it is. A snap-in covers should be over the screw that holds the handle's base in place. After removing this and you'll be able to see the screw that holds the handle base in position. After both screws have been removed and you are able to pull the handle from the uPVC.
After you have removed the uPVC handle, carefully unscrew it from the locking mechanism. Take careful note of the length of the spindle, as you'll need to make sure that you buy an alternative that is the same length as your original handle and locking mechanism.
The spindle wears out and
replacing becomes inoperable with the locking mechanism. This could be due to corrosion, damage from frequent use, or a loosening locking mechanism. If this occurs, it is necessary to replace the window handle and locking mechanism to restore the full functionality to your uPVC windows.
How do I get rid of my old handle?
Over time and through everyday usage, window handles could become damaged or broken, and if this happens it is essential to fix them as soon as you can to ensure the security of your home. It is simple to replace a worn or damaged handle. The task can be completed in less than a minute without the need for any special tools.
The first step to remove the old handle is to take off the screw situated on the top of the base of the handle. Once the screw is removed, the handle will be pulled away from the base. Another screw will be located at the base of the handle. This can also be removed. When both screws are removed, the handle can be completely detached from the base portion of the window.
Once the old handle has been removed, grab the new handle and
replacing line up the fixing holes with the holes that are currently in the window frame. If there is a sticker or cap on the new handle, take it off it if required and put the handle back in place. It is important to check that the handle is working after it has been installed. Turn the handle and make sure that the lock mechanism is activated.
Espag handles feature a spindle which protrudes from the handle and slots into the multipoint locking mechanism on the window frame. Cadenza windows have a blade with cutouts that are incorporated into the lock mechanism. Cockspur handles are long and are hung over the outer frame of the window or the transom bar crossmember.
Once you have installed the new handle, place the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. The handle is now ready for use to use, so try opening and closing the window a few times to check that it works correctly and securely.
How do I install the new handle?
It's not difficult to alter the handle on your Upvc windows. The procedure is simple. All you require is a screwdriver, and a small amount of patience. First, ensure that the handle that you are replacing is unlocked. Then, remove any visible screws. You could also replace them with screw caps. After removing the handle you will need to note the length of spindle that extends from the back. This is vital because it will determine the type of handle you need to buy.
Espagnolette handles are the most popular type of handle for uPVC windows. They feature a spindle that is inserted into the handle and operates a locking mechanism inside the window frame. The handle opens the latch, allowing the window to open. When used regularly and time, handles for espagnolette may become damaged.
Cadenza handles are a type of uPVC handle that is commonly employed with tilt and turn windows. They feature an extended blade that works a multipoint locking mechanism within the window. They are more secure than espagnolette handles since they only open from the inside. You can replace them using the same method as you would do for handles made of espagnolette however, make sure that the new handle is angled, not flat.
Once you have determined the right handle to purchase, you can simply align the new handle to the existing screw holes and then screw it into place. Then, put the screw covers back on and make sure the new handle is working correctly. This is done by shifting the handle from the locked to the unlocked position and the reverse direction a few times. It is possible to contact an expert to determine if you can resolve any problems.