Repairs to uPVC Windows
uPVC is an excellent option for modern homes. They are long-lasting, durable and easy to maintain. They don't decay or rust as aluminum or timber.
It is important to clean and oil UPVC windows and doors regularly. This will help avoid unnecessary repair costs and increase energy efficiency.
1. Broken Glass
The damaged glass in your windows could cause severe damage to your home, and could even be fatal. You should take the time to make sure that your windows are in good condition.
For single pane windows it is fairly easy to replace them, and the replacement is usually able to fit into the frame that was previously installed easily. However when you have double-pane windows that are anchored by internal beading, it'll be more difficult to get rid of the old panes and put in new ones. In this situation you'll need locate some plastic spacers to help the new pane to fit properly into the window frame.
Wearing protective eyewear and thick gloves is a must for anyone who plans to remove the glass yourself. It is also a good idea to lay down a drop cloth before you start working on the glass to ensure that any fragments of glass fall onto the cloth rather than on the floor, where they could be trampled on and cause further damage.
After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to stop drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders to gain access into your home. If the distance between the door and the window is significant, you may prefer security screens that includes an opening. This will give you the best of both.
2. Sagging
uPVC is a durable energy-efficient, cost-effective and economical alternative to timber sash windows. In time, they could be affected by a variety of issues that include sagging. A sagging uPVC window could cause issues with light, draughts and even security. If you notice that your uPVC window is beginning to shrink, it's important to act quickly to stop the issue from becoming worse.
To fix a window that is sagging you can try to reposition the hinges. First, you'll need to open the windows so you can access the frame. Then, using a screwdriver, you can unscrew the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to test the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure that they remain in place.
If you are unable to move the hinges, you may have to replace the seal. Over time, rubber seals lose their elasticity and become dry, which causes them to loosen. If this happens, it's important to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.
uPVC handles could also become loose. Often, this is caused by screws that have become loose over time. However, it could be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. First, you'll need close the window and perform an initial test fit. The joint at the corners of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into the position it was in.
3. Water Leaks
It is crucial to take action if awake each day to discover mouldy walls and wet floors. Water leaks from windows can not only cause destruction of your home's structure but also undermine your efforts to control the temperature inside your home. The most frequent reason for leaking uPVC windows is that the sealant around the frame has been damaged or missing.
This is a relatively easy fix that can be completed by any skilled DIYer. Based on the severity of the problem the old caulking may need to be removed before a fresh layer is applied. When it is time to
uPVC repair, you should avoid 'over-caulking'. This will only make your window harder to clean and reduce its energy efficiency.
Make sure that the drainage holes have no debris in them and ensure that the sill pan has been properly angled to allow the water to drain from the window. In more serious cases you might have to consider replacing the window.
Mold spots and rotten sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread across the home.
If the leakage is occurring between the
double glazing-glazed glass it is more likely that the issue is more with the seal rather than the frame. It is also possible to be fixed by an uPVC window specialist who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your
upvc repair window is difficult to open or it opens in an ease. They can be easily repaired by any skilled DIYer and can be done within a few minutes.
Almost every household in the UK will have either top hung or side hung uPVC windows that have hinges and, like all mechanical parts, they can wear down over time. It's very simple to change a window hinge however it is easier if someone else helps you to hold the frame.
Make sure that the uPVC hinges are open and closed in the proper direction. You can do this by checking for the arrows on each hinge. This shows which way the window should be opened.
The issue can be caused due to opening the window in the wrong way or by a poor installation in the factory. Sending us photos via our website is often enough to resolve the problem. We are more than happy to give suggestions.
It is also essential to ensure that the hinges are lubricated on a regular basis. This can be done by applying a light engineering oil to the hinges. We suggest using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It also decreases the risk of a window sticking and prevent corrosion. This must be done at a minimum every year. WD40 or other solvent-based lubricants are not recommended as they can cause damage to your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a few various factors. The hinges can also be misaligned due to wear, which can cause gaps where the sash and frame meet. If they're beyond repair, it could be necessary to get them re-aligned. The second is the interlock,
Upvc Repair which is located on the hinge of the window and can be misaligned. Again, it is feasible to give them a thorough clean, however in some cases it might be necessary to have them replaced.
The second most frequent reason for draughts are the window seals. These are prone to wear or damaged over time and allow air to escape through the gaps. Installing high-quality weatherstripping will help to keep draughts at bay. Another alternative is to replace the window with low-emissivity glass, this will help to regulate indoor temperatures and will lessen draughts.
Another, and most effective methods to reduce draughts is by using a draught excluder. These are typically fabric tubes that are filled with some kind of filler. They can be placed on the top of your windowsill. They can help block out cold air and keep your home warm and cosy!
Your windows made of upvc will keep providing excellent insulation and security in your home with a little regular maintenance and repairs. It is crucial to recognise that all windows have a life span and they may reach a point where it is more economical to replace them than fix them. If you are experiencing issues with your window made of upvc it is recommended to speak with a professional immediately.