0 votes
by (300 points)
Why You Need a Ghost 2 Immobiliser Fitting Near Me

Modern day thieves can take vehicles within 1 minute. They use the vehicle's OBD port to hack into the ECU and then duplicate a new key, all from a hidden laptop in the car.

imageAn Autowatch Ghost immobiliser stops this by sending a sequence of pin codes through the buttons on your vehicle (steering wheel and central console). It is completely inaccessible to anyone inside your vehicle.

No key fobs, or LED indicators to indicate its location

The ghost immobiliser is the best way to prevent keyless entry theft and key copying. This device is designed to protect your vehicle against these types of attacks, by preventing the engine after a proper pin code has been entered. This is a very effective method of safeguarding your car, and even insurance companies see it as a precautionary measure that can help reduce the cost of your policy.

The way the ghost works is by connecting to your vehicle's CAN data network. Once installed by us at Car Theft Solutions it will only start when you enter a specific button sequence using your personalised override code. The engine will not start if you try to start your vehicle without using the code. The criminal then realizes they have been taken prisoner and will likely leave the vehicle.

One of the major advantages of this system is that it doesn't transmit any signals as trackers, which means that thieves can't utilize RF signal receivers in order to pinpoint the location of your Ghost device. It also does not send out any IR (infrared) signals, like the standard remote control key fobs or trackers do, which makes it difficult to deceive or hack.

The Ghost also has the valet-mode, which is activated if you are transferring your vehicle over to valet to park or service. This will disable the immobiliser on the CAN for 30mph and enables you to use the vehicle normally using your key fob or smartphone app. When the vehicle is set up again, the Ghost will be restored to full functionality.

Car Theft Solutions is the place to contact If you'd like to learn more about Ghost, or should you wish to have it installed in your vehicle. We are a family-owned business with more than 10 years' experience in the field of vehicle security. This includes the Ghost immobiliser installation. We are a Thatcham-approved installer of Ghost products and our name is built on customer satisfaction.

No hacking, cloning, or altering

The Autowatch Ghost is one of the most advanced immobilisers available on the market, it protects your car from hacking or key cloning, making it near impossible to take. The only method to steal your car is physically tow it away. Even then, they won't be able start the engine.

This is because unlike other immobilisers which only stop your vehicle from starting if don't have a fob, the innovative system actually shuts off the engine control unit to prevent the vehicle from starting. It works by sending a signal through buttons on your steering wheel or door panel, or on your central console that can only be deactivated by entering the correct pin code configuration It is this feature that makes the Ghost so hard to crack.

Its discreet and sleek design ensures that it will fit in seamlessly into your vehicle, with no additional keys or LED indications and it operates independently of your alarm system or tracker from factory. It is a CAN-bus immobiliser, which means that it is part of the vehicle's control network and does no interfere with existing devices like your car's key fob or alarm.

This unique technology is not detectable by thieves and other systems that rely on RF scanning and code grabbing. It only transmits pin codes silently through the buttons on your vehicle's steering wheel or door panels, or central console. The Ghost is an innovative device that protects your vehicle from keyless entry and smart key theft. It does this by creating an individual, unique pin code that needs to be entered in order to disable it.

The number of keyless entry vehicles that are on the road is growing. Thieves are getting more sophisticated and employ devices for cloning which can be bought online or in classifieds for less than PS15. They can then use the cloned fob to gain access to your vehicle. A standard vehicle immobiliser stops the engine from starting if they have your original key fob. This is not enough security and is easy for criminals to alter or jam signals to gain access to the vehicle.

Valet mode

An immobiliser that is standard on your vehicle has an electronic chip that sends a signal when you hit your key fob button. The system will then look for that specific code that was sent from the key to start the vehicle. If the proper signal cannot be received, the system will cut off power and prevent the car from beginning. This is the basis of all immobilisers that are sold aftermarket. It is a vital measure to prevent your car from being taken away, even if someone has your keys or a device that could enhance the signal of your key fob.

Ghost immobilisers do more than stop this. The system, located on the CAN Bus of your Mercedes has been programmed with an unique PIN code that must be entered to begin the car. This is then locked on your app, and ghost 2 immobiliser Fitting near me no one can ever access it unless they have the same pin you have.

The system also stops hacking, cloning and signal jamming (which could be used by thieves to bypass the immobiliser inside your car). This means that if someone does manage to get your car keys or your key fob, they won't be able to start your car even if in the vicinity of only a few feet of it. They might only steal your car onto the flatbed truck and that's highly unlikely.

Valet mode is a handy feature that is included with your ghost immobiliser. When activated, the glove box and trunk of your vehicle will be locked. This means that anyone attempting to take your car away will not have anything personal to steal. It will also limit the speed of your Tesla so it can't be driven over 70mph. It also will disable insane modes. It will also conceal your work and home addresses as well as lock your driver profiles, and lock your Tesla dashboard to ensure that nobody else has access to access your private information.

If you wish to use your car as valet parking, or service, select the 'Valet/Service mode' on the dashboard app. Enter the 4-digit valet number on the touchscreen. After this is done, the alarm functions will be bypassed however it will hinder the ability to start your car without a valid pin entered. This is ideal for people who need to transfer their car to others such as taxi drivers and garage mechanics.

The first aftermarket CAN-bus immobiliser on the world

The Autowatch ghost 2 immobiliser cost is the world's first aftermarket CAN bus immobiliser. It provides security that is unmatched by any other product available today. It safeguards you from key hacking or cloning, and even the theft of keys. This is accomplished through a partnership with your vehicle's current interface. It does not require additional remotes or fobs however, it instead connects to the vehicle's data network, CAN. This makes it a discreet gadget.

The device is a hidden circuit board that connects to the engine management system in your car (ECU) and works silently. When activated, it stops your car from starting until a specific PIN is entered. This is a unique code that you will receive when you make an appointment for installation. This number is required to enable valet, deactivate the alarm, or allow you drive away in a car belonging to a friend (if they also have Ghost installed).

It is designed to ensure that it cannot be detected by anyone who is looking inside your car's interior. It does not send any radio signals and will only be heard when it's activated.

Your answer

Your name to display (optional):
Privacy: Your email address will only be used for sending these notifications.
Welcome to FluencyCheck, where you can ask language questions and receive answers from other members of the community.
...