Protect Your Pride And Joy With The Ghost Immobiliser
Ghost Immobiliser will safeguard your prized item from theft. This system is discrete and doesn't require additional key fobs.
The device uses existing buttons in your vehicle (steering wheel doors, door panels, and the centre console) to create a unique pin code sequence of up to 20 presses long. This will allow your vehicle to start.
Simple PIN Code Change Process
Many homeowners are upgrading their security because of the rise in vehicle theft. There are a variety of security devices that are sold aftermarket, from tracking systems to alarms and immobilisers. However, not all of these are equally efficient in protecting your vehicle. A tracking system can help you locate your car if it is stolen however, it won't stop the crime. An immobiliser, on contrary is exactly what says on the label: it shuts off the engine of your vehicle so that it is unable to be started. The Autowatch
Ghost 2 immobiliser immobiliser is one of the most advanced options on the market, making it nearly impossible for thieves to take your vehicle.
Utilizing the buttons already in your car The ghost device generates an exclusive sequence that has to be entered before the engine can start. This can be done using the heater, window or indicator stalk buttons. In addition option, there is an app for mobile devices that can function as an emergency PIN code bypass and allow the driver to operate the car without the button sequence. This is especially useful if you need to hand your car over to a valet service or parking since the immobiliser will still be active and not deactivated.
The
ghost immobiliser fitting near me is an innovative and unique device that works by using your vehicle's buttons rather than as a separate unit. It's not just an effective deterrent for vehicle theft however, it can also be used on any future vehicles you own. This makes it a much more cost-effective option than a traditional wheel lock.
Weatherproof small device
The Autowatch ghost immobiliser is a sophisticated security device that protects your car from key cloning, hacking & ECU swapping. It's a weatherproof, tiny device that communicates directly with your vehicle's ECU over the CAN data bus to disable the engine. It can be installed in the vehicle without the need for additional wiring, and has been thoroughly tested to make sure it works with all vehicles. It also is resistant to jamming devices that are a common technique used by thieves to get around the immobilisers in place.
The advantage of CAN data over traditional systems is that they operate silently. It cannot be detected using sophisticated RF scanning and code-grabbing technologies and cannot be identified by conventional diagnostic tools. The Autowatch Ghost does not use LED indicators, but instead uses buttons in your vehicle, such as the steering wheel, the centre console, or door panels,
Ghost Immobiliser Problems to create a unique disarming sequence. You can even make this sequence as long as 20 presses to provide additional security. The iPhone app lets you make a single, authorised connection, with the pairing code unique to the Ghost and communication between the two is secured.
The Ghost will stop car thieves from putting in a new ignition key or replacing the ECU to bypass the immobiliser. It will only allow the engine to run when the correct PIN code is entered. It can also be put into valet/service mode for a temporary operation (with set parameters such as 30mph speed limit) so that you can hand your car over to a valet service or to be serviced without needing to enter a pin code.
Each vehicle is tested
The Autowatch Ghost is the first aftermarket immobiliser for CANbus. It can be connected to the wiring of your vehicle and also to the engine control unit (ECU). The device detects electronic signals to disable the system of your vehicle from going through its normal startup routine until you input an individual passcode. The system can be turned off or on via your smartphone's app, without the need for extra wires.
The factory-installed immobilisers function by using a transponder, which is integrated into the key. It transmits a message to the ECU. The car will start when the correct code is transmitted. However, if the transponder from another vehicle is used instead, the immobiliser doesn't recognize it. This allows the vehicle be started and stolen. A South African company that is at the forefront of safety systems technology developed the Ghost immobiliser. It shields your pride and joy from hacking, key cloning and even key theft. Only by physically towing your car away can thieves get it and not be able to drive the vehicle.
Ghost uses buttons on your vehicle, like the indicator stalk, the steering wheel, and the door panels, to generate a unique PIN code which must be entered in order to use your car. It does this without extra hardware, such as key fobs. It can take up 20 to 20 presses. It is also unrecognizable to diagnostic equipment and doesn't transmit radio frequency signals, so thieves cannot use sophisticated RF scanning or code-grabbing technology to detect that security systems have been installed.
Ghost is harder to remove than car alarms that require disarming with the buttons. This makes it a great complement to an GPS tracking device that can be used to track your vehicle after it's been taken.
Override of emergency PIN code
You do not have to look too far on social media to see stories or even videos of vehicles that have been taken by car thieves using the most advanced technology tools available to them. Key-cloning devices, for instance, and hacking tools that allow thieves to start the vehicle with the original keys.
The Ghost immobiliser helps combat this and gives you an additional layer of protection to stop your vehicle from being taken when it is targeted by thieves. It generates an individual pin code by pushing the buttons on your steering wheel, door panel and centre console. This unique PIN has to be entered together with your original key fob in order to stop the vehicle from beginning. The unique override pin can be found on a black plastic card that you receive following your installation. It is easy to remember since there aren't any LED indicators.
The device is hidden within the vehicle's wires, and does not emit radio signals, therefore it can't be identified by modern thieves using diagnostic software that can detect the type of security system you have installed. This makes it a great alternative to an electronic device for tracking.
Unlike most other security systems, which have a relay in the engine bay these CANBUS Immobilisers communicate with the vehicle's ECU and BCM via the CAN data bus (brand dependent). This allows them to disable a vehicle completely, by sending a digital block to the ECU and engine.
They can also be linked to an analog alarm, immobiliser or tracker. This should be decided prior to the installation. They are also service/valet mode compatible and
Ghost Immobiliser Problems a good alternative to a tracker when having your car in for repair at the dealers.
Service/Valet Mode
In recent years there has been an increase in the number of vehicles being stolen with no owner's keys. It's now more easy than ever to steal your pride and joy thanks to the availability of key cloning tools and door lock picks. To stop this, we are now offering the Autowatch ghost immobiliser problems (
try michaelsen-begum.hubstack.net) immobiliser that prevents your car from being driven even if your keys have been cloned or your vehicle has been hijacked.
It connects directly to your cars ECU (Engine Control Unit) via the CAN data circuit. It's completely quiet since it doesn't use radio frequencies or key fobs. It can't be detected by diagnostics or any other hacking device.