UPVC Window Handle ReplacementIt's simple to repair a damaged window handle with the right tools. It is essential to identify the kind of handle you have and the spindle's size before you purchase an alternative.
Older uPVC windows feature handles with cockspurs, which have spurs that protrude to secure a wedge-shaped cockspur striker plate. They can be left- or
UPVC Window Handle Replacement right-handed and must be compatible when replaced.
What kind of lock or handle do I have?
There are a myriad of upvc window locks and handles, each with its particular advantages and uses. The type of handle you have will determine whether or not your locking mechanism is efficient and if it is easy to open the windows. With time and regular use, window handles made of upvc may become damaged or worn out, rendering them less effective and secure. In some instances they could even disappear completely. If you notice that your upvc
glass window replacement handles have fallen off, it is crucial to repair them as quickly as you can. This will help to avoid burglaries and keep your home safe.
It's a simple job that virtually anyone can perform. With a few basic tools and the right knowledge it's a straightforward procedure that should take no more than a couple minutes. To get started you must determine the kind of handle and lock you have on your window to help you find the perfect replacement.
Inline Espagnolette Handles
They are typically found on the outside of the window. They have a flat design and come with a latch that engages with the locking mechanism of the window frame when turned. Inline upvc handles also come with a spindle that goes through the centre of the handle and into the frame of the window to activate the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and feature an unusual hook-shaped design. Cockspur handles are secured to the frame of the window with one screw, and are less secure than other types of window handle.
Tilt and Turn Handles
The tilt and
UPVC Window Handle Replacement turn handles differ from other handles made of upvc in that they can be turned for opening the window, and then tilted into the window to allow air circulation. They typically feature a 7mm spindle on the back of the handle. They are available in left and right-handed versions.
When buying replacement upvc handles It is crucial to check the spindle length because not all handles are the same size. Drop something in the middle of the hole to check the length. This is the maximum spindle length that will fit your window.
What is the spindle?
uPVC window handles work in a similar manner as doors. By turning the handle, you will be able to activate a latch inside the frame. This unlocks the window to allow it to be opened and closed. The handles could be damaged, especially if they're frequently used or exposed to harsh conditions. It is possible to replace the handles on your uPVC window if they're not able to operate it correctly.
There are several different types of uPVC handles that are available, including Espag, Cockspur and Spaded handles. They are designed in a variety ways to fit into uPVC frames. Each handle style uses a different spindle to lock the window mechanism. This is why it is important to identify the type of handle you have on your uPVC window so you can get the correct replacement.
The base section of the handle will inform you what kind of uPVC it is. There should be a "snap in' cover over one screw which holds the handle base in the correct position. Take it off and you should be able see the second holding screw at the opposite end of the base portion of the handle. After both screws are removed you should be in a position to pull the handle away from the uPVC window.
Once you have removed the uPVC window handle, you will need to remove the spindle that was previously attached to the locking mechanism. Take note of the length of the spindle. You'll need purchase a new one that is the same length as the original handle and the locking device.
The most common issue with window handles made of uPVC is that the spindle gets worn out and can no longer operate the locking mechanism. This could be due damage from constant use or loosening of the locking mechanism or even rust over time. If this happens, it is required to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.
How do I remove the handle from the previous one?
Window handles can become damaged or broken over time. It is essential to repair them as quickly as possible to ensure your safety. It is good to know that replacing a worn or damaged handle is a fairly easy task that can be carried out in just over a minute and doesn't require any specialist tools.
The first step to remove the old handle is to take off the screw situated at the top of the base of the handle. Once the screw is removed, the handle can be pulled away from the base. There is another screw located at the bottom of the handle base, and it can be removed too. Once these two screws have been removed, the handle will be removed from the window's base.
After removing the old handle and align the fixing holes of the new handle with the holes that are already in the window frame. There might be a small sticker or caps on the new handle, so remove them if needed and then put the handle in the frame. Once the handle is set, it is crucial to verify that it is working by turning the handle and making sure that the lock mechanism is activated.
Espag handles come with a spindle which protrudes from the handle and slot into the multipoint locking mechanism of the window frame. Cadenza windows have blades with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over either the outer frame or transom bar cross member within the window.
Once you have the new handle in place, insert the spindle into the window lock and then tighten it down. Replace the snap-in cover and screw cap (if appropriate) after the handle is fixed. The handle is now ready to use, so try opening and closing the window several times to make sure that it functions properly and securely.
How do I install the new handle?
It's not difficult to change the handle on your Upvc windows. The procedure is simple. All you need is a screwdriver and a small amount of patience. First, make sure the handle that you are replacing is unlocked. Remove any visible screws. You can also replace them using screw caps. After the handle has been removed, you need to make a note of the length of the spindle which protrudes from the back of the handle. This is crucial since it will determine the type of handle that you will need to purchase.
Espagnolette handles are the most commonly used type of handle used on uPVC windows. The spindle is inserted into the handle to activate the locking mechanism in the window frame. When the handle is turned it releases the latch on the window and allows it to open. As time passes and with regular use, espagnolette handles can become damaged or impaired, making it necessary to find an alternative.
Cadenza handles are a form of uPVC handle that is commonly used in tilt and turn windows. They have an extended blade that works the multipoint locking mechanism inside the window. They are more secure than an espagnolette handle as they can only open from the inside. They can be replaced with the same procedure as espagnolette handles but you will need to make sure that the new handle has a curved blade as opposed to one that is flat.
Once you have determined the correct handle to purchase then you can line up the new handle to the existing screw holes, and then screw it in place. Then, put the screw covers on and test the new handle.