Repairs to
upvc repairs near me Windows
uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. They are not susceptible to get rotten or rusty like aluminum or timber.
It is important to clean and oil UPVC doors and windows on a regular basis. This will reduce repair costs and improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows can cause significant damage to your home and even be fatal. It is crucial to take the time to make sure that you're doing all you can to keep your windows in good shape.
For single pane windows it is relatively easy to replace them, and the replacement will generally fit within the frame that was previously installed easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the old panes. In this case you'll need to find some plastic spacers to assist the new pane to fit correctly into the frame of the window.
Wearing protective eyewear and thick gloves is a must if you plan to remove the glass by yourself. It is also recommended to lay down a drop cloth before you begin working on the glass so that any shards fall on the fabric instead of onto the floor where they could be trodden under and cause further damage.
After the glass has been removed and the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the property until a professional can come out and fix the window. This will also act as a barrier, preventing any intruders from getting access into your home. If the gap between the window and the door is significant, you may want to use an alarm system that has an opening. This will give you the best of both.
2. Sagging
uPVC is a durable, energy-efficient and affordable alternative to timber sash windows. Over time, they can be affected by a variety of issues, including sagging. A sagging uPVC windows could cause issues with light, draughts and even security. It is crucial to act as soon as you notice your uPVC windows are falling down.
Repositioning the hinges could aid in fixing a window which is sagging. First, you'll need to open the windows so you can get at the frame. Then, using a screwdriver, you can remove the hinges at the top and bottom and adjust them by turning them clockwise or counter-clockwise. Close your window to test the fit after having relocated your hinges. If you're happy with the fit, tighten the screws until they remain in position.
If you are unable to reposition the hinges you may require replacing the seal. Over time rubber seals can lose their elasticity and become dry and cause their tightness to decrease. If this happens, it's important to replace the seal as fast as possible so that your uPVC windows remain watertight and draught-proof.
uPVC handles may also loosen up. This is typically caused by screws that have become undone over time, but it could also be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix the loose uPVC window handle yourself. The first step is to close the window and
uPVC repair then perform a test to ensure that it fits. The joint at the corner of the sash should be aligned with the joint on the casing. If it doesn't then you can use a screwdriver to loosen the handle, and then turn the mechanism back into position.
3. Water Leaks
If you wake up to wet floors and damp walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature inside your home. Most often, uPVC window leaks are caused by a lack or damage to the sealant.
This is an easy fix that can be done by anyone who is a DIYer with the skills. Depending on the severity of the issue the caulking used previously may require removal before a new layer of caulk is applied. When it comes to
uPVC repair, you should avoid 'over-caulking'. This can make your window more difficult to clean and decrease its energy efficiency.
Check that any drainage holes have no debris in them, and also that the sill pan is properly angled to drain away from the window. In more serious situations, you may have to replace the window.
Mold spots and rotten sills are another sign of water leakage. This mold thrives in damp environments and can quickly spread throughout the home.
It is also important to keep in mind that if the leak is coming from between the glass of your double glazed windows, it is more likely to be an issue with the glass seal rather than the frame or sagging. Again this can easily be fixed by an uPVC window expert who can replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault if your uPVC window is difficult to open or if it opens in an ease. Any competent DIYer can replace hinges in just a few minutes.
Most households in the UK will have either top hung or side hung uPVC windows that are hinged and like any mechanical part they are susceptible to wear and tear over time. It's easy to replace a hinge on a window but it's much easier if someone else helps you hold the frame.
It is also important to verify that the uPVC hinges are being opened and closed in the correct direction. You can check this by checking for the arrows on each hinge. This indicates which way the window should be opened.
The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This can often be resolved by sending us a photograph through our website and we will be more than happy to give you advice.
Regular lubrication of hinges is also essential. This can be done by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regular lubrication will make the window easier to open and close. It also helps prevent corrosion and reduce the risk of sticking. This is recommended to be done at least once a year. WD40 and other solvent-based lubricants are not recommended as they will damage parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a variety of various factors. First, the hinges because of wear and tear, could become misaligned. This causes a gap to form where the sash meets the frame. If they are damaged beyond repair, it could be required to realign them. The interlock, which is located on the hinge of the window and can also be misaligned, and again it is possible to give them a clean but in certain cases, it may be necessary to get them replaced.
The seals may wear out or get damaged over time, allowing air to escape. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glasses. This will help to regulate indoor temperatures and lessen the risk of draughts.
The last way to reduce drafts effectively is to use a Draught-excluder. These are typically fabric tubes filled with a filler which can be hung over your window sill. They will keep your home warm by blocking out cold air.
Your upvc windows can remain a great source of insulation and security for your home with regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more efficient to replace them than repair them. If you are experiencing issues with your Upvc windows, it is always recommended to seek assistance from a professional as soon as possible.
