Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber, they do not get rusty or decay.
It is crucial to wash and oil UPVC doors and windows regularly. This will prevent unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
If the glass in your window is broken it can cause a great deal of damage to your home, making it very hazardous and possibly fatal. It is essential to take the time to ensure that you're doing all you can to ensure that your windows are in good condition.
Single-pane windows are relatively easy to replace and generally fit into old frames very easily. If you have double-paned windows which are joined by internal beading, it will be more difficult to remove and replace the panes that were previously in use. In this situation it is essential to buy plastic spacers to help the new pane fit into the
window replacement frame.
Wearing eye protection and thick gloves is a must when you are planning to remove the glass yourself. You should also lay down a dropcloth prior to you begin working on the window panes, so that any shards fall on the fabric and not onto the floor, where they could be trampled.
Once the glass has been removed, it's a good idea to seal the gap with clear packaging tape or duct tape to block water and drafts from entering the home until a professional comes out and repair the window. This will also act as a barrier that will prevent any intruders to gain access to your home. If the distance between the window and the door is substantial, you may prefer security screens that includes windows. This will give you the best of both.
2. Sagging
uPVC windows and doors are a cost-effective, durable and energy-efficient alternative to timber windows with sash. However, over time they may be afflicted by a variety of issues like sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. If you find that your uPVC window is beginning to lose its shape, it's important to act quickly to prevent the problem from getting worse.
To fix a sagging window you can try to reposition the hinges. To accomplish this, you'll need open the window so that you can access the frame. Then, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or
Upvc Repair counter-clockwise. After you've repositioned the hinges, close the window and test it for an appropriate fit. If you're satisfied with the fit of your window,
uPVC repair tighten the screws to secure them in the right position.
If you are unable to reposition the hinges, you may need to replace the seal. Rubber seals can dry out and lose their elasticity with time, causing them to loose their elasticity. It is crucial to replace your seal as quickly as you can in order to ensure that your uPVC window watertight and draughtproof.
uPVC handles could also become loose. This is typically caused by screws that have been removed over time, but it could be due to the handle mechanism wearing out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and perform a test fitting. The joint at the corner of the sash must align with the joint on the casing. If it does not then you can use the screwdriver to loosen up the handle. Then turn the mechanism to position.
3. Water Leaks
If you awake to wet floors and mouldy walls each time it rains it is important that you take action. Leaks of water from windows can cause structural damage to your home, and hinder your ability to control the temperature in your home. Most often, uPVC window leaks are caused by a damaged or missing sealant.
This is a simple fix that can be done by any DIYer who is competent. Depending on how serious the problem is, the old caulking may need to be removed. When it comes to
uPVC repair, you should avoid over-caulking. This will make your window harder to clean and reduce its energy efficiency.
Make sure that the drainage holes are free of debris in them, and also that the sill pan has been properly angled to drain away from the window. In more extreme instances, you may need to replace the window.
Mold spots and rotted sills are also signs of water leakage. The mold thrives in damp environments and can quickly spread throughout the home.
If the leakage is occurring between the double-glazed window, it is more likely that the issue is with the seal than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will restore the full insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and blow open in a breeze it could be hinges that are at fault. Anyone with the skills to fix them can replace hinges in just a few minutes.
Almost every household in the UK will have top-hung or side hung uPVC windows that have hinges and like any mechanical part they are susceptible to wear and tear over time. It's very simple to change the hinges on a window but it's much easier if someone helps you hold the frame.
It is also worth checking that the uPVC hinges are opening and closed in the correct direction. This can be done by looking for the arrow on each hinge, this indicates the direction in which the window should open.
The issue could be caused either due to opening the window in the wrong way or due to a poor installation at the factory. This issue can be fixed by sending us a picture through our website and we will be more than happy to give you suggestions.
It is also crucial to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil to the hinges. We recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regular lubrication can help the window open and close more easily. It can also reduce the risk of a window sticking and help prevent corrosion. It is recommended to perform this every year. WD40 or other solvent-based lubricants should not be used as they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by a variety of different factors. Firstly the hinges, again because of wear and tear, could become misaligned. This will cause gaps to develop where the sash meets the frame. They can be repaired by giving them good cleaning, but in the event that they are beyond repair it may be necessary to have them aligned or replaced. The interlock may also become disaligned. This happens on the hinge side and might require to be cleaned. In some instances it is possible to replace them.
These seals can wear down or become damaged over time, allowing air escape. Replacing these with high-quality weatherstripping will help to stop draughts. Replace the windows made of upvc with low-emissivity lenses. This will help control indoor temperatures, and reduce the possibility of draughts.
The last way to reduce draughts effectively is by using a Draught-excluder. These are usually made of fabric tubes filled with a filler which can be put on top of your window sill. They will keep your home warm by blocking out cold air.
The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is essential to remember that all windows eventually get worn out and it is more cost-effective to replace them than to repair them. If you have any problems with your window made of upvc you should consult an expert as soon as you can.