How to
Replace Upvc Window Handle a UPVC Window Handle
If your upvc window handle is damaged, don't be concerned. Replacing a upvc window handle is a relatively simple task and can be accomplished in a matter of a few steps.
Whether you have a cranked or in-line espagnolette type of window handle, they all feature a square spindle that protrudes from the back plate and is slotted into the locking mechanism.
Identify the type and size of the handle and lock.
Over time window handles and locks could get damaged or lose function. The good news is that this can often be remedied without replacing the entire uPVC window unit. One of the first things to do is to determine the kind of lock and handle you have to determine the replacement parts you'll need.
Identifying the type of handle can be done by looking at the handle's base. A screw or pin will secure the handle to its base. If the screw is gone, it could be a sign the handle has split from the base section. If the handle is split internally and does not grip the spindle anymore It could also be a sign that the handle needs to be replaced.
There are a variety of uPVC handles however the Espag handle is the most common. These are typically fixed by two bolts and feature an articulating spindle that is connected to the lock mechanism inside the window frame. These handles are commonly used on tilt and turn uPVC windows.
Cockspur handles are a different kind of uPVC handle. They are similar to the Espag handle, however they have a low projection from the frame. These handles are generally used on older uPVC windows.
Venetian window handles are another option. They are similar to Espag handles, but they have a flat bottom which allows them be installed in a flush position with the frame. They are a great option for homeowners who are looking for an elegant and stylish handle that blends with their uPVC window frames. The handles are also available in a large variety of colors to match any style.
Measure the spindle
It is crucial to be aware of how the handle fixed in place before ordering an replacement. This will help determine if it's too tight or loose and if it will fit into the window frame. This can be done by identifying the handle type and determining the spindle's measurement. The spindle is a metallic shaft that connects your handle to the lock inside the window frame. The spindle is available in a variety of sizes. The current standard for the industry is 8mm. Older handles may have a 9mm cross-section, therefore it's important to determine the cross-section of the old one to ensure you get the right size replacement.
There are a variety of window handles, but the most popular are inline Espagnolette and Cockspur handles. These handles are used to operate a locking mechanism in the window. They utilize shootbolt rods to lock the window when it is closed. Depending on the type of handle they are held in place by screws or pins.
You can find replacement upvc window handles online and in a lot of DIY stores. They are available in a variety of finishes, and are suitable for new or
replacement double glazed windows windows. To ensure security, they can be either key-locking or non-locking fire-escape.
To remove your old handle, open the window and remove the screws which hold it in place. Place the screws in a container to avoid damage. Once the screws are removed, carefully remove the handle. Take a measurement of the distance from the base of the spindle to its end. This will provide you with the necessary information to purchase the right replacement. The spindle of the handle is the steel shaft that connects it to the gearbox that locks the window frame.
Remove the old handle
The replacement of the handle of an uPVC handle is a simple task that takes just five minutes, if you have the appropriate tools. The first step is to determine the kind of lock and handle that will help you find the correct replacement. Then, you can measure the spindle to make sure that the handle is suitable. In the end, you'll need take the handle off and replace it with the new one.
The majority of uPVC handles are inline Espagnolette handles, which are equipped with central spindles that slot into the window's locking mechanism. These are generally easy to remove, but you may need to use force when they are stuck. The handle is usually fixed by two screws which can be removed by using the help of a screwdriver. Depending on the kind of handle you have, you may also have to remove the pins that hold it in place.
After removing the screws, you can take off the old handle. If the handle is unlocked, the top of the baseplate will be visible. This will reveal two screws that can be removed. There's also small silver or another colour sticker that needs to be removed if it's in place.
You can now screw in the new handle using the screws that came with the old handle. Make sure that the handle is in the open or unlocked position, and then align the screw holes with the holes on the window. After you've done this, you can replace the caps on the screws and test the new handle to ensure that it functions correctly. It's simple to replace a uPVC handle, but you must do it right.
Install the new handle
It's time to install your new handle if you've successfully removed the old one from the frame. Begin by locating the screw covers and levering them out using your screwdriver. Once they are removed, put them in a safe place and proceed to the next step.
Then, insert the new spindle into the handle by aligning it with the existing hole and screwing it into. Make sure that you align the holes in the handle with those in the window frame. Also, use a screw that is of the same length as those used previously or it could cause the handle to not being secure.
uPVC Espag handles are fitted with a square 7mm spindle that rotates the lock mechanism that is installed to the window. This style of handle is found in the majority of modern uPVC windows. uPVC Cockspur (also called by the name Cotswold) handles have a long, curved nose that locks onto the outer frame or cross member of the transom bar. They are typically found on older uPVC windows.
It's important to lock and unlock the window numerous times after the handle has been put in place. If all goes according to plan, the new uPVC handle should be securely fixed and operating smoothly. If you encounter any issues these steps will assist you identify the issue and resolve it quickly. Bridgewater Glass can help you when you're experiencing issues with your uPVC handles or other glazed home improvements. Our glaziers have been trained to repair or replace a variety of window handles and frames making us a good choice for your
double glazed replacement windows glazing requirements.
Test the new handle
Over time, uPVC handles become damaged and worn out. This can make them less effective and secure which is why it's crucial to replace them as soon as you can. This is also a good idea to do when you are upgrading your windows. Change your lock mechanism and
replace Upvc Window handle handle will help maintain your new windows' integrity.
There are a variety of styles of uPVC window handles. Some are fixed with pins or screws, whereas others have blades that slot into the lock mechanism. Each type has a distinct way to replace it, and you'll need to know which one you own.
Espag window handles are the most popular type, and they're typically found on the latest uPVC windows. The spindle extends from the handle into the lock gearbox and triggers the locking mechanism when you open the window. They're also easy to remove, but you should take care not to damage the mechanism or the handle when doing so.
Cockspur handles are another option for uPVC window handles. The locking mechanism is activated when the window is closed or tilted. A spur is attached to the wedge-shaped striker plates on the frame.