UPVC Window Handle ReplacementIt's simple to repair a broken window handle with the right tools. It is essential to know the type of handle you have and its spindle size before you purchase an alternative.
Older uPVC windows have cockspur handles for windows. They have spurs that protrude to lock over a cockspur wedge striker plate. They can be left or right-handed and need to match when replacing.
What kind of lock and handle do I have?
There are many windows locks and handles made of upvc, each with its particular advantages and uses. The type of handle that you own will determine if the locking mechanism you have is effective and if it's easy to open the windows. With time and regular use the handles made of upvc on your windows may become damaged and worn out. This makes them less secure and less effective. In certain instances,
UPVC Window Handle Replacement they might even fall off completely. If you notice that your upvc window handles have been removed, it's crucial to repair them as quickly as possible. This will avoid burglaries and ensure your home is secure.
The good news is that replacing your window handles made of plastic is a relatively simple task that can be completed by nearly anyone. You'll need some basic tools, but with appropriate knowledge, it's an easy task that will only take a few minutes. To get started you'll need to determine the type of handle and lock you have on your window, which will help you to find the ideal replacement.
Inline Espagnolette Handles
These are the most common type of upvc handles and are usually located on the outside of your window. They are flat and feature an opening that engages the locking mechanism of the window frame. Inline upvc handles also have spindles that run through the middle of the handle and then into the frame of the window to activate the latch.
Cockspur Handles
These handles are typically located on older uPVC windows and feature an distinctive hook-shaped design. Cockspur handles have one screw that is used to secure the handle to the window frame and are not as secure as other kinds of window handles.
Tilt and Turn Handles
In contrast to other handles made of upvc that are tilt and
UPVC Window Handle Replacement turn, these handles can both be rotated to open the windows and the handle can be tilted to the side to allow ventilation. Generally, they have a 7mm spindle on the side of the handle. They are available in both left and right handed versions.
When you are purchasing
double glazing replacement window handles for upvc It is crucial to verify the length of the spindle because not all handles are the same size. Drop something in the middle of the hole to check the length. This is the longest spindle length that will fit in your window.
What is the spindle?
uPVC window handles work similarly as doors. By turning the handle, you will be able to activate a latch inside the frame. The latch opens the window, to allow it to be shut and opened. The handles can become damaged, particularly if they're often used or are exposed to harsh environments. This could mean that you have to replace your uPVC windows handles as they may not operate the window properly in the future.
There are many types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in various ways and each handle type utilizes a specific spindle to lock the mechanism into the window. It is crucial to know the kind of handle that is installed on your uPVC windows to ensure that you replace it with a suitable one.
You can find out what kind of uPVC handle you are using by taking a look at the base of your handle. There should be a "snap-in cover' over one screw that holds the handle base in place. Take it off and you should be able to see the second screw located at the opposite end of the base section of the handle. Once both screws are removed you should be in a position to pull the handle away from the uPVC window.
After you have removed the uPVC handle, carefully remove it from the locking mechanism. Take note of the length of the spindle. You will need to purchase a replacement with the same length as the original handle and locking device.
The spindle wears out and is unable to operate the locking mechanism. This can be caused by corrosion, damage from frequent use, or an unreliable locking mechanism. If this happens, you will have to replace both the window handle and the locking mechanism to restore the full functionality of your uPVC Windows.
How do I take off the handle from the previous one?
Over time and through everyday use, window handles can become damaged or broken and if this happens, it is crucial to repair them as quickly as possible to ensure the safety of your home. It is easy to replace a worn or damaged handle. The job can be completed in less than a minute without the need for any special tools.
To remove the old handle, first remove the screw that is located at the bottom of the handle. Once the screw is removed, the handle will be removed. There is another screw located at the bottom of the handle's base, and it is able to be removed too. After both screws are removed, the handle can be removed completely from the base of the
double glazed window replacement.
Once the old handle has been removed, you can take the new handle and align the fixing holes with the holes that are currently in the window frame. If there is a cap or sticker on the new handle remove it if required and screw the handle in place. Once the handle is in place it is essential to check that it works by turning the handle, and ensuring that the lock mechanism is activated.
Espag handles have an extra spindle that is protruding from the handle and slot into a multipoint locking mechanism in the window frame. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and are hung over the frame that surrounds the window or the transom crossmember of the bar.
Once you have the new handle in place, insert the spindle inside the window lock and then tighten it down. When the handle is fixated then replace the snap-in cover and screw cap (if appropriate). Once the handle is ready to use, open and close the window a few times to ensure it works correctly and securely.
How do I put in the new handle?
It's not difficult to change the handle on your uPVC windows. The procedure is easy. All you need is a screwdriver and a little bit of patience. First, make sure the old handle is unlocked. Remove any visible screws. You can also replace them with screw caps. Once the handle is removed, you need to make an note of the length of the spindle that protrudes from the back of the handle. This is crucial as it will determine the kind of handle you'll require to purchase.
Espagnolette handles made of uPVC are the most sought-after kind of handle. The spindle runs through the handle to activate the locking mechanism within the window frame. When the handle is turned it opens the latch on the window, allowing it to open. During regular use and time, handles made of espagnolette can be damaged.
Cadenza handles are another type of uPVC window handle that is commonly used on tilt and turn windows. They feature an extended blade that works an interlocking mechanism that is multipoint within the window. They are more secure than the espagnolette handle as they can only open from the inside. They can be replaced with the same procedure as espagnolette handles however you must make sure that the new handle has a curved blade instead of one that is flat.
After you have picked the correct handle, simply align the new handle to existing screw holes prior to fixing it with screws. You should then put the screw covers back on and test that the new handle is working properly.