Window Repairs
Window repairs can help homeowners save money and maintain their comfort. In the event of severe damages such as broken glass or a damaged frame,
window replacement may be required.
But there are many other issues that can be repaired to extend the lifespan of your windows. The most frequent issues are:
Cracked or broken Panes
Whether it's an errant rock being tossed by your lawnmowers, or a tree branch blown by high winds, cracked window glass isn't just ugly, but it can also result in higher electric bills since the broken pieces let cold air into your home. It's fairly simple to repair windows with broken panes.
Begin by carefully removing glass using gloves and glasses. You may need to use a utility knife to remove old glazing compound or putty around the frame's edges. Then, clean the glass's surface and the frame's wood using a soft cloth or paper towel.
Once the frame is clean then apply a waterproof silicone caulking to the perimeter of the frame. This will prevent water from leaking into the frame through the crack and causing further damage.
If you have double-pane glass, cracks that are not treated properly could weaken the gas layer that lies between the panes and render your windows less insulative. If the crack is significant enough to compromise the integrity of the glass, or the glass has an inner pane completely missing, it might be time to call in an expert.
Thermal stress cracks may also occur when there is a drastic difference in temperature inside and outside your home. The glass is then able to expand and shrink. If the cracks are situated on two sides of a window it is recommended to replace it instead of try to repair it.
Clear tape can be used to close cracks in windows that aren't yet ready to be replaced. It will also keep out bugs and cold wind. You can cut the length of a nylon stocking to completely cover the crack, and then attach it using duct tape. This isn't an end-to-end fix, but it will keep cold air out and insects away from your home. If your windows are older and you're starting to notice cracks in the glass, it's recommended to consult with your local window company about whether replacing the entire window might be the best option for you.
Rotten Wood
Wood rot is a common problem for windows. It can degrade a house's appearance and pose a safety hazard. However, it is possible to repair wood that has rot. First, you will need to make sure that the source of the rot has been dealt with. Check for roof leaks and other areas where water can enter the wood.
The next step is to remove the rotten parts of the window frame. This can be done using either a chisel, a rasp or claw hammer. After removing the rotten wood, you'll have to replace it with new wood. Pre-treated wood is suggested for this task, since it will resist the onset of rot. If you are unable to replace the rotted timber then you can use wood hardener and
window replacement filler to reinforce the damaged area. The majority of hardware stores sell this kind of product. To achieve the best results, follow the instructions on the product label.
After you have replaced the decayed areas of the windowsill, it is crucial to safeguard the newly repaired area. Apply a water-resistant sealant to the wood. A product such as Sikkens is an excellent option to accomplish this task.
It is also possible to use an epoxy filler with two parts to protect the wood from further damage. This product is easy-to-apply and leaves a beautiful finish. However, it is important to follow the directions for application on the label. Once the epoxy filler has dried, you can sand down the wood's surface. It is best to begin with a rough grade of sandpaper, and then progress to a smoother grade.
You do not want to expose the rotted part to more moisture. It is a good idea so, to protect the surface you have repaired with an oil-based primer that will protect it from water. Then, you can apply the waterproof wood sealant.
The website won't work
The reason a window won't open can be the result of many factors. The house may have settled or the wooden frames may have warped in wet weather. Someone might have also secured them with a nail for security. With a bit of patience and the right tools, you can open most stuck windows.
Accumulated debris or gunk can be a major reason of windows that aren't opening. Acme Glass notes that dirt and grime builds up over time on hinges, sliding tracks, and locks. Metal hardware may also rust if it comes in contact with humidity and direct sunlight. Maintaining these areas lubricated by spray grease will help prevent the oxidation process and ensure that your window is working properly.
Stuck windows can be caused by a loosening or breakage of the pulleys that are used to raise and lower the window. These components can lose tension and cause obstruction if they are located two or
Window Replacement more floors above surface.
If you are having difficulty opening a door, you can use a pry-bar to gently push the
upvc window repairs open. Put a block on the frame of the window to give the pry bar more leverage. Be careful not to damage either the wood or the window. Try running a hairdryer along the frame's edges for a few minutes. This will warm the wood, making it easier to move.
A damaged spring can be the reason for windows that aren't able to lift or lower. You'll need to check your owner's guide for more details depending on the person who made your windows.
If you have tried cleaning the moving parts of your windows and lubricating them, but they still won't open it could be the right time to replace windows with new, energy-efficient windows from Homespire Windows and Doors. Don't let the windows in your home go from being functional to inoperable. A window that isn’t properly shut could expose your home to burglary and water damages. Contact our team to learn more about our replacement windows and services today!