Repairs to uPVC Windows
uPVC is a fantastic option for modern homes. They are easy to maintain and are durable and long-lasting. They do not rot or rust like timber and aluminum.
Regularly cleaning and lubricating UPVC windows and doors is vital. This will reduce repair costs as well as improve the efficiency of energy.
1. Broken Glass
The damaged glass in your windows can cause significant damage to your home and may even be fatal. You should take the time to ensure that your windows are in good condition.
For single pane windows it is fairly easy to replace them, and the new window is usually able to fit into the frame of the previous one easily. If you have double-paned windows which are held together by internal beading, it will be harder to remove and replace the old panes. In this instance it is essential to buy plastic spacers to make sure that the new pane fits into the window frame.
Wearing eye protection and heavy gloves is essential for anyone who plans to remove the glass yourself. It is also recommended to lay down a drop cloth prior to when you begin working on the glass so that any fragments of glass fall on the fabric instead of landing on the floor,
Upvc Window Repairs where they could be trodden under and cause further damage.
Once the glass is removed, it's a good idea to seal the gap with packaging tape or duct tape to block drafts and water from entering the home until a professional is able to come out and fix the window. This also serves as an obstacle to stop intruders from getting into your home. If the gap between the window and the door is significant, you may want to use security screens that has windows. This will give you the best of both.
2. Sagging
Upvc windows and doors are an affordable energy-efficient, durable and long-lasting alternative to timber windows made of sash. Over time, they can develop a number of problems, including sliding. A sagging uPVC windows can cause issues with light, draughts, and even security. It's crucial to act as soon as you discover that your uPVC windows are sagging.
Repositioning the hinges could aid in fixing a window which is sliding. First, you'll need to unblock the windows to get at the frame. After that, using the screwdriver, you'll be able to remove the hinges at the top and bottom and adjust them by turning them clockwise or anti-clockwise. Close your window to check the fit after you have relocated your hinges. If you're happy with the fit, you can tighten the screws to ensure they stay in place.
If you can't reposition the hinges,
UPVC Window Repairs you may need to replace the seal. Over time, rubber seals lose their elasticity and become dry and cause them to lose tightness. It is essential to replace your seal as quickly as you can to keep your uPVC window watertight and draughtproof.
uPVC handles may also become loose. This is often caused by screws that have loosened over time, but it could be due to the mechanism of the handle getting worn out. It's a good thing that it's simple to fix a loose
upvc window repairs window handle yourself. First, you'll need to shut the window and perform an initial fitting. The joints at the corners of the sash should align with the joint on the casing. If it isn't you can use a screwdriver to loosen the handle. Then turn the mechanism back into place.
3. Water Leaks
It is essential to act if you awake each day to discover mouldy walls and floors that are wet. Windows that leak water do can not only cause destruction of your home's structure but also hinder your efforts to regulate the temperature inside your home. Most of the time, uPVC window leaks are caused by damaged or missing sealant.
This is a relatively easy fix that can be completed by any competent DIYer. Depending on how serious the issue is, old caulking might need to be removed. It is essential to keep in mind that when it comes to
uPVC window repairs you should avoid the temptation to "over-caulk and then make the area harder to clean and can decrease the efficiency of your energy usage.
Make sure that the drainage holes have no debris inside them and that the sill pan is properly angled to allow the water to drain from the window. In more severe cases, you may need to replace the window.
Mold spots and rotted sills are other signs of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.
It is also important to remember that if the leakage is coming from between the glass in your double glazed windows it may be more likely to be an issue with the glass seal rather than the frame or sagging. This can be easily repaired by an uPVC window specialist who can replace the glass seal and regain the full insulation properties of your windows.
4. Faulty Hinges
Hinges could be at fault for the reason that your uPVC window is difficult to open or if it opens with a breeze. They can be easily repaired by any DIYer who is skilled and can be completed in a matter of minutes.
Like all mechanical parts hinges will wear out over time. It is very easy to replace a hinge on a window but it's much simpler if you have someone to help you hold the frame.
It is also important to verify that the uPVC hinges are being opened and closed in the right direction. Look for the arrows on each hinge to determine the direction in which the window should be opened.
The issue could be caused by opening the window improperly or by a poor installation at the factory. Sending us a picture via our website will often solve the issue. We are more than happy to offer advice.
Regularly lubricating hinges is also essential. This can be accomplished by applying a light engineering oil to the hinges, we recommend using a solvent-free lubricant, such as 3-in-one Multi-Purpose Oil. Regularly lubrication makes the window easier to open and close. It can also lower the risk of a window sticking and help prevent corrosion. It is recommended to do this at least once a year. WD40 or other solvent-based oils should not be used since they can cause damage to your uPVC windows.
5. Draughts
Draughts can be caused by different causes. Firstly the hinges, again because of wear and tear, may become displaced, which will cause gaps to develop where the sash joins the frame. If they are damaged beyond repair, it could be required to realign them. Second, the interlock can also become misaligned. It is located on the hinge's side and might require to be cleaned. In some cases it might be necessary to replace these.
The second most frequent reason for draughts are the window seals, these are prone to wear or damaged over time, and will allow air to escape through the gaps. This can be prevented by replacing them with high-quality weatherstripping. Replace the windows made of Upvc with low-emissivity lenses. This will help control indoor temperatures and decrease the risk of draughts.
Another, and most effective ways to reduce drafts is to use an draught excluder. These are usually fabric tubes that are filled with some sort of filler and can be positioned on top of your windowsill. They will keep your home warm by blocking cold air.
Your upvc windows can remain a great source of insulation and security to your home by performing regular maintenance and repairs. It is crucial to realize that all windows have a life span and eventually, they will reach a point where it is more economical to replace them than repair them. If you are experiencing issues with your upvc window it is recommended to speak with a professional as soon as you can.