UPVC Window Handle ReplacementReplacing a damaged window handle is a relatively simple process and with the right tools it can be accomplished quite quickly. However, it is essential to know the handle's type and
UPVC Window Handle Replacement spindle's length prior
UPVC Window Handle Replacement buying a replacement.
Older uPVC windows have handles with cockspurs, which have a spur that protrudes to secure a wedge-shaped cockspur striker plate. These can be either left or right-handed and must be to match when replacing.
What kind of lock or handle do you have? I have
There are many upvc window locks and handles each with their own advantages and purposes. The type of handle you have will determine the ease to open your windows and if the locking mechanism functions as intended. As time passes, and with regular use the handles made of upvc on your windows could become damaged and worn out. This makes them less secure and effective. In some instances, they could even fall completely off. It is essential to fix your window handles made of upvc as soon as you see them falling off. This will prevent possible break-ins and ensure that your home is safe.
It's a task that virtually anyone can perform. With just a few tools and the right information it's a straightforward procedure that should take no more than a couple minutes. You will need to be aware of the type of lock or handle you have on your window. This will allow you to choose the appropriate replacement.
Inline Espagnolette Handles
They are typically found on the sides of the window. They have a flat design and come with a latch that engages with the locking mechanism on the window frame when it is turned. Inline upvc handles feature a spindle running through the middle of the handle and into the window frame to control the latch.
Cockspur Handles
These handles are usually found on older uPVC window frames and have distinct hook-shaped designs. Cockspur handles are attached to the frame of the window with only one screw and are less secure than other varieties of window handles.
Handles that can tilt and turn
Unlike the other upvc handles the tilt and turn handles can both be rotated to open the windows and turned inwards to allow to let air flow in. They typically have a 7mm spindle on the back of the handle. They are available in left and right handed versions.
It is essential to know the spindle size when buying new upvc handles. There are a few that are exactly the same size. Drop something in the middle of the hole to measure the length. This is the maximum spindle length that will be suitable for your window.
What is spindles?
uPVC window handles work similarly as doors. By turning the handle, you are able to activate a latch inside the frame. The
glass window replacement is then opened and closed. But, at times, these handles can become damaged, especially when they are frequently used or exposed to harsh weather conditions. This could mean that you have to replace your uPVC handles on windows since they might not operate the window correctly for a long time.
There are a variety of uPVC handles, including Espag, Cockspur, and Spaded handles. These handles are designed in a variety ways to fit into uPVC frames. Each handle type utilizes an individual spindle to lock the window mechanism. This is why it is essential to know what type of handle is installed on your uPVC window to find the right replacement for it.
You can check what type of uPVC handle you have by taking a look at the base of the handle. There should be a'snap in cover over one screw that holds the handle's base in place. Once you remove this and you'll be able to see the screw that holds the base of the handle in place. Once both screws are removed you should be able to pull the handle away from the uPVC window.
Once you have removed your uPVC window handle, you will need to carefully unscrew the spindle you have removed from the locking mechanism. Take note of the length of the spindle. You will need to purchase a new one that is the same length as the original handle and locking device.
The main issue with most uPVC window handle problems is that the spindle gets worn out and can no longer operate the locking mechanism. This could be due damage from constant use, a loosening of the locking mechanism or even rust over time. If this occurs, you will have to replace both the window handle and locking mechanism in order to restore the full functionality of your uPVC Windows.
How do I remove my old handle?
In the course of time and daily usage, window handles could become damaged or broken and if this happens, it is essential to fix them as soon as you can to ensure the safety of your home. It is easy to replace a worn or damaged handle. The job can be completed in less than one minute without the need for any special tools.
The first step to remove the handle that was previously used is to remove the screw that is situated at the top of the base of the handle. After this screw is removed, the handle can be removed from the base. A second screw is located at the bottom of the handle. It can also be removed. When both screws are removed the handle can be completely detached from the base portion of the
sash window replacement.
After removing the old handle and align the fixing holes of the new handle with the existing holes in the window frame. If there is a cap or sticker on the new handle, remove it if required and put the handle back in place. It is important to check whether the handle functions after it is put in place. Turn the handle around and make sure that the lock mechanism is activated.
Espag handles have spindles that protrude from the handle and slots into the multipoint locking mechanism that is on the frame of the window. Cadenza windows come with a blade with cut-outs that slot into the lock mechanism, while Cockspur handles have an extended nose that hangs over the frame's outer or transom bar cross member inside the window.
Once you have installed the new handle, insert the spindle inside the window lock and tighten it. Replace the snap-in cover and screw cap (if applicable) once the handle is fixed. The handle is now ready to use, so try opening and closing the window a few times to check that it works properly and securely.
How do I fit the new handle?
It's not that difficult to change the handle on your windows made of uPVC. The procedure is easy. All you need is a screwdriver, and a small amount of patience. First, make sure that the old handle is unlocked. Then remove any screws that are visible. You could also replace them with screw caps. After the handle has been removed and you are ready to take an outline of the length of the spindle that protrudes from the back of the handle. This is vital as it will determine what type of handle you need to purchase.
Espagnolette handles made of uPVC are the most popular kind of handle. They feature a spindle that is inserted into the handle, and is responsible for an internal locking mechanism within the window frame. When the handle is turned it releases the latch on the window, allowing it to open. With time and regular use, espagnolette handles may be damaged or damaged which is why it is essential to locate replacements.
Cadenza handles are a type of uPVC handle that is commonly used in tilt and turn windows. They have a protruding knife that works with a multiple-point locking mechanism within the window. They are more secure than espagnolette handles because they are able to open from the inside. They can be replaced using the same method that you would do for handles made of espagnolette however, ensure that the new handle is not angled and flat.
Once you've decided on the correct handle to purchase then you can place the new handle to the existing screw holes, and then screw it in the appropriate position. Then, put the screw covers on and test your new handle.
