How to Replace the Replacement Key Battery For the Saab 9-3
saab car key replacement owners must follow a set of unique steps to add a second ignition key. This requires the use of a handheld computer, known as Tech-2 that is operated by the dealer. Then the transponder must be replaced and a key have to be purchased.
It is a good idea to rotate your keys in order that one doesn't wear out more quickly than the other. This will also ensure that your keys remain in good condition.
Replacement Case
Contrary to the classic Saab keys of old keys, the latest keys have electronic components which makes it hard to make a copy. This has made stealing cars much more difficult than it was a few years ago. However, it has also made replacing lost saab key -
Learn Alot more - keys a much more expensive task.
Every owner of a Saab 9-3 must have at minimum two working keys. If one gets lost, it costs a fortune to get another one for the car because it involves replacing the CIM module, and then reprogramming the locking cylinders. Dealers usually charge between $100-$200 to do this.
There are options to avoid the high cost. Some parts retailers will search for the code from an extra key (usually the same one that opens the doors and turns on the ignition) and cut a new metal key blade at just a fraction of dealer cost. The key, however, must be the same as the original in order to function in your car.
Follow these steps to replace the case. You'll require a flathead screwdriver as well as some patience. With the screwdriver, pry off the plastic and then remove the emergency key. Once the case has been opened take out all electronic components and place them in your new case. Make sure you insert the correct key and badge into the case.
Replacement Battery
The replacement battery for the Saab 9-3 is a cheap component that can be replaced quickly and easily. This DIY video from YouTube user Cyclone Cyd explains how to replace the remote key fob battery in just four steps. This tutorial is suitable for any modern saab key fob, however, the procedure may differ slightly.
This button is usually located next to the Saab logo on the back of the fob. This button is typically located on the back of the fob, next to the Saab Logo. Next you will need a flathead screwdriver to insert into the small hole inside this button. This should be enough to unlock the fob's case to allow you to replace the battery.
After the new battery CR1632 is in place then you can reassemble your remote key fob, and then program it to your car. The entire process should not take more than an hour at most. This is a straightforward process that doesn't require any special tools.
The process is more complicated in the event that you lose your key, but it's possible. The dealer has to find the VIN number of the car and then order a new key blade and TWICE module, both with the correct unique code. Then,
lost saab key they'll have to cut the replacement key and then program it with a brand new tool for programming called MDI.
Key Replacement Fob
The key fob is the piece that locks and unlocks your car. It has batteries inside. Batteries are able to last for a short time and eventually will die. It is a common problem for all vehicles. The good news is that you can replace the battery in most key fobs without having to replace the entire case. You can purchase replacement fobs on Amazon that come with all the electronics already installed, which means you can simply open the case and replace the old batteries. It is necessary to remove the emergency key before you replace the batteries. To do this, insert the screwdriver of a small flat head into the slot that is in the middle of the. Move the screwdriver around the case, and it should split open, making it simple to take it out.
If you're planning to replace your keys, be sure to have a spare on hand. This will save you lots of money. If you have an additional key, request the dealer to cut it in half and program it to your car. This is a lot less expensive than purchasing a brand new key fob.
It is possible to add a second key to your vehicle in the event that you don't have one, but it takes lots of research and effort. It costs a few hundred bucks to add an additional car key. The computer of the vehicle also has to be programmed. This can be done by a professional, but it's a costly choice for the majority of owners.
Replacement Ignition
Unlike earlier Saab vehicles, the latest SAAB 9-3 models feature an upgraded alarm system that is built on a key code. If you lose only one key, it can be costly to replace it with another one because the car must include a computer and also be programmed to accept a new key. Even a dealer can charge hundreds of dollars to program an entirely new key, if they are unable to complete the task.
If you've lost the only working key, a dealer will repair the computer in your car (known as the CIM or SAAB TWICE) in order to make a replacement, and will charge top dollar for it. We can reprogramme the existing EEPROM inside your car's computer to make it ready for an extra key. This will save you more than 50% on the cost you would spend at an auto dealer.
If you've been a long time owner of a 03-11
saab ignition key 9-3, you likely are aware that the ignition key isn't very robust. If the ignition key you have isn't working properly, you should consider replacing it. They can become sticky and the buttons can fall off. It's not as difficult as it seems to replace the ignition key. With the right tools, it can be accomplished in a matter of minutes.
