UPVC Window Handle Replacement
Replacing a damaged window handle is a relatively easy process, and with the right tools it can be accomplished quite quickly. However, it is essential to identify the type of handle and
[Redirect-302] its spindle's length prior to purchasing a
replacement window glass near me.
Older uPVC
double glazed windows replacement feature handles with cockspurs, which have an extension spur that can the lock of a wedge cockspur striker plate. These can be either right or left-handed and have to be matched when replacing.
What type of lock and handle do I have?
There are a variety of upvc window locks and handles, each with its distinct advantages and functions. The type of handle you own will determine if the locking mechanism you have is effective and if it's easy to open windows. With time and regular use, window handles made of upvc may become damaged or worn out, making them less effective and secure. In some instances, they could even fall off completely. If you notice that your upvc window handles have been removed, it's important to repair them as quickly as possible. This will stop possible burglaries and will keep your home safe.
It is a good thing that
replacing your window handles made of plastic is a fairly simple job that can be done by everyone. With a few basic tools and the right knowledge it's a simple process that shouldn't take less than a few minutes. You must know the type of lock or
Download free handle you have on your window. This will help you select the correct replacement.
Inline Espagnolette Handles
They are typically found on the sides of the window. They have a flat design and have a latch that connects to the locking mechanism of the frame of the window when it is turned. Inline upvc handles also come with a spindle that runs through the center of the handle and into the window frame to operate the latch.
Cockspur Handles
They are usually found on older uPVC windows and have distinct hook-shaped designs. Cockspur handles have one screw that secures the handle to the frame of the window and are not as secure as other kinds of window handles.
Tilt and Turn Handles
Unlike the other upvc handles that are tilt and turn, these handles can be turned to open the window and the handle can be tilted to the side to let air flow in. In general, they have a 7mm spindle on the back of the handle. They are available in left and right handed versions.
It is crucial to determine the spindle size when buying replacement handles made of upvc. Not all of them are exactly the same size. To test the length of your upvc handle simply drop something in the middle of the hole and then measure the distance it travels before it comes into contact with an obstruction. This is the largest spindle size that will fit in your windows.
What is a spindle?
uPVC window handles operate in a similar manner as doors. By turning the handle, you can open a latch in the frame. The window is then opened and closed. However, in some cases, the handles may become damaged, particularly when they are frequently used or exposed to harsh weather conditions. It is possible to replace the handles on your uPVC window if they're not functioning correctly.
There are many different types of uPVC handle options, such as Espag, Cockspur, and Spaded handles. These handles are designed to fit inside the uPVC frames in various ways and each handle type uses a specific spindle to secure the mechanism to the window. This is why it is crucial to know the type of handle you have installed on your uPVC window to find the right replacement.
You can determine the type of uPVC handle you have by inspecting the base of the handle. A snap-in covers should be over the screw that holds the handle's base in place. Once you remove this and you'll be able to see the screw that holds the handle base in place. Once both screws have been removed and you are able to remove the handle from the uPVC.
After you have removed the uPVC window handle, you have to remove the spindle that was previously attached to the locking mechanism. Note the length of the spindle. You'll need buy a replacement of the same length as the original handle and the locking device.
The most common issue with uPVC window handle problems is that the spindle gets worn out and can no longer function properly with the locking mechanism. This could be due to damage from constant use or loosening of the locking mechanism or even rust over time. When this happens it is necessary to replace the window handle and locking mechanism to restore complete functionality to your uPVC windows.
How do I remove my old handle?
Window handles can become damaged or even broken over the course of time. It is crucial to fix them as quickly as possible to ensure your safety. The good news is that replacing a worn or damaged handle is a easy task that can be completed in less than one minute and doesn't require any special tools.
To take off the handle, you first need to remove the screw that is located at the base of the handle. After the screw is removed, the handle can be pulled away. There will be another screw located at the bottom of the handle's base and it is able to be removed too. After the two screws are removed, the handle will be removed from the window's base.
After the handle has been removed, you can take the new handle and align the fixing holes with the holes that are present in the window frame. If there is a sticker or cap on the new handle, remove it if necessary and then put the handle back in place. It is crucial to verify that the handle is working after it has been installed. Turn the handle and make sure the lock mechanism is working.
Espag handles have an extra spindle that is protruding from the handle and slots into a multipoint locking mechanism within the window frame. Cadenza windows feature a blade with cutouts which fit into the lock mechanism. Cockspur handles are long and hook over the frame of the window or the transom bar crossmember.
Once you have the new handle in place, you can insert the spindle inside the lock inside the window and then tighten it. Once the handle is firmly fixated, replace the'snap in' cover and screw cap (if necessary). When the handle is in use, simply open and close the window a few times to make sure that it functions correctly and securely.
How do I install the new handle?
It's not difficult to change the handle on your Upvc windows. The procedure is simple. You only need an screwdriver and a bit of patience. First, make sure the handle is not locked. Remove any screws that are visible. You could also replace them with screw caps. Once the handle is removed and you are ready to take a note of the length of the spindle that protrudes from the back of the handle. This is important as it will determine the type of handle you'll need to purchase.
Espagnolette handles are the most commonly used type of handle for uPVC windows. The spindle runs through the handle to activate the locking mechanism within the window frame. The handle releases the latch, allowing the window to open. In regular use and time, espagnolette handles may be damaged.
Cadenza handles are another type of uPVC window handle, which is typically used on tilt and turn windows. They feature an extended blade that works an interlocking mechanism that is multipoint within the window. They are more secure than espagnolette handle as they can only open from the inside. They can be replaced with the same procedure as espagnolette handles but you will need to make sure that the new handle has a curved blade as opposed to flat ones.
After you have chosen the right handle, simply align the new handle with existing screw holes prior to screwing it into place. You should then put the screws back on and make sure the new handle functions properly.