Repairs to uPVC Windows
uPVC is a fantastic choice for modern homes. They are durable, long-lasting and easy to maintain. Unlike timber and aluminium, they do not corrosion or rot.
Regularly cleaning and lubricating UPVC windows and doors is crucial. This will help avoid unnecessary repair costs as well as improve energy efficiency.
1. Broken Glass
If the glass in your window has been damaged, it can cause a great deal of damage to your home, which can make it very dangerous and potentially fatal. It is important to make sure that your windows are in good shape.
Single-pane windows are fairly simple to replace, and they generally fit into old frames very easily. However when windows with double panes are anchored by internal beading it will be more difficult to take out the panes that are in place and replace them with new ones. In this case you'll need to source some plastic spacers to help the new pane to fit properly into the frame of the window.
Wearing protective eyewear and thick gloves is a must when you are planning to remove the glass yourself. It is also recommended to lay down a drop cloth before you begin working on the
window replacement panes to ensure that any shards of glass fall onto the fabric, not onto the floor which could cause them to be trampled under.
After the glass has been removed and the glass is removed, it's a good idea to cover the gap with packaging tape or duct tape to stop water and drafts from getting into the home until a professional can come out and fix the window. This will also provide an obstacle to stop criminals from getting into your home. If the gap is particularly large, you may be interested in the security door with an integrated window, as it will provide the best of both worlds.
2. Sagging
upvc window repairs (
http://vn.easypanme.com/board/bbs/board.php?bo_table=business&wr_id=1118733) is a long-lasting and energy efficient alternative to timber sash windows. However, over time, they may be afflicted by a variety of issues,
UPVC Window Repairs including sagging. A window that is sagging can cause problems with light, draughts, and even security. It is crucial to act as soon as you discover that your uPVC windows are sagging.
Repositioning the hinges could aid in fixing a window that is sagging. First, you'll need to open the windows to get at the frame. Then, remove both the hinges at the top and bottom with a screwdriver and adjust the hinges clockwise or counter-clockwise. Close your window to test the fit after you've moved your hinges. If you're happy with the fit, tighten the screws until they remain in the right place.
If you are unable to move the hinges, you might have to replace the seal. Over time, rubber seals lose their elasticity and dry out and cause them to lose tightness. If this happens, it's important to replace the seal as soon as possible to ensure your uPVC windows are waterproof and
Upvc window repairs draught-proof.
uPVC handles can also loosen up. Often it is due to screws that have come loose over time. However, it can be due to the fact that the handle mechanism has worn out. It's relatively easy to fix a loose uPVC handle. You'll first need to close the window and do an experiment fitting. The corners of the sash must be aligned with the casing joint. If it isn't, you can use a screwdriver or a wrench to loosen the handle and reverse the mechanism back into its original position.
3. Water Leaks
If you're waking up to damp floors and mouldy walls each time it rains, it's important to take action. Water leaks from windows not only lead to the destruction of your home's structure but also hinder your efforts to control the temperature in your home. Most of the time, uPVC window leaks are caused by a damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who has the ability. Depending on how severe the problem is, the old caulking might need to be removed. When it comes to
uPVC repair, you must be careful not to over-caulk. This will make your window more difficult to clean and reduce its energy efficiency.
Verify that the drainage holes do not have debris in them and that the sill pan is properly angled to allow the water to drain from the window. In more serious cases you may need to think about replacing the window.
Moldy sills and rotten ones are another sign of water leakage. This fungus thrives in damp conditions and can spread quickly throughout the house.
It is also important to remember that if the leak is coming from between the glass in your double glazed windows, it is more likely to be an issue with the glass seal, rather than the frame or sagging. Again this can easily be fixed by a uPVC window specialist who will replace the glass seal and restore the full insulation properties of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or are loose and open with a breeze It could be the hinges that are at the fault. Any competent DIYer can replace the hinges in a matter of minutes.
Nearly every home in the UK will have either top hung or side hung uPVC windows that have hinges and, just like any mechanical component they can wear down over time. It is an easy procedure, but it is easier to do with someone else to help hold the frame up.
Check that the uPVC hinges are closed and open in the right direction. Look for the arrows that are on each hinge to determine which way the window should be opened.
The issue can be caused by opening the window incorrectly or a faulty installation at the factory. It is usually possible to fix the issue by sending us a photograph through our website and we will be happy to give you advice.
Regular lubrication of hinges is also essential. This can be accomplished by applying an oil that is light in nature to the hinges. We suggest using a solvent-free lubricant, such as the 3-in-one Multi-Purpose oil. Regularly lubrication makes the window easier to open and close. It can also stop corrosion and reduce the risk of sticking. This must be done at a minimum every year. WD40 and other solvent-based lubricants should not be used as they could damage your uPVC windows.
5. Draughts
Draughts in Upvc windows can be caused by a few different things. Firstly the hinges, again because of wear and tear, may become displaced, which will cause a gap to form between the sash and the frame. They can be fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them realigned or replaced. In addition, the interlock could also become disaligned. This is located on the hinge side and could require to be cleaned. In certain instances, it may be necessary to replace these.
The second most frequent reason for draughts are the window seals. These can become worn down or damaged over time and let air escape through these gaps. This can be avoided by replacing them with high-quality weatherstripping. Replace the windows made of upvc with low-emissivity glass. This will help regulate indoor temperatures and decrease draughts.
The last way to reduce draughts effectively is by using a draught-excluder. These are usually made of fabric tubes filled with a filler that can be placed over your window sill. They will help stop cold air from entering and keep your home warm and cosy!
The windows made of upvc can continue to provide excellent insulation and security in your home with regular maintenance and repairs. It is crucial to realize that all windows have a lifespan and there may come an point at which it is more cost-effective to replace them rather than repair them. If you are experiencing issues with your window made of upvc, it's best to consult a professional immediately.