Repairs to uPVC Windows
uPVC windows are a fantastic choice for modern homes. They are long-lasting, durable and easy to maintain. In contrast to aluminium and timber,
UPVC repair they don't rust or rot.
Cleaning and lubricating regularly UPVC windows and doors is essential. This will prevent unnecessary repair costs as well as improve the efficiency of energy.
1. Broken Glass
The broken glass in your windows can cause significant damage to your home, and could even be fatal. It is important to take the time to ensure that you're doing all you can to keep your windows in good shape.
Single-pane windows are fairly simple to replace, and they generally fit into frames that were previously in use very easily. However, if windows with double panes are anchored by internal beading, it will be more difficult to get rid of the panes that are in place and replace them with new ones. In this instance, you will need to source some plastic spacers that help the new pane to fit properly into the frame of the window.
Wearing eye protection and thick gloves is essential when you are planning to remove the glass yourself. It is also recommended to lay down a dropcloth prior to you begin working on the window panes to ensure that any shards of glass fall onto the fabric and not onto the floor which could cause them to be trampled under.
It's a great idea to cover the gap with tape after the glass is removed. This will stop drafts and water from getting into your home until a professional arrives to repair the window. It also acts as a barrier, preventing any intruders from getting access into your home. If the gap between the door and the window is significant, you may want to use a security screen that also includes a window. This will provide the best of both.
2. Sagging
Upvc windows and doors are a cost-effective energy-efficient, durable and long-lasting alternative to timber windows made of sash. However, with time, they are susceptible to a range of issues like sagging. A window that is sagging can cause problems with light, draughts, and even security. If you notice that your uPVC window is beginning to shrink, it's crucial to act fast to stop the issue from getting worse.
Repositioning the hinges can help fix a window that is sagging. First, you'll need to open the windows to get at the frame. With the screwdriver, you'll be able to remove the top and bottom hinges and adjust them by turning them clockwise or anti-clockwise. Once you've adjusted the hinges, close your window and verify the fitting. If you're satisfied with the fit of your window, tighten the screws to keep them in place.
If you can't reposition the hinges, you may require replacing the seal. Rubber seals may dry out and lose their elasticity with time, causing them to loosen. If this happens, it's essential to replace the seal as soon as possible so that your uPVC windows are waterproof and secure from draughts.
uPVC handles may also become loose. The majority of the time this is due to screws that have come loose over time. However, it can occur because the handle mechanism has been worn out. It's relatively easy to fix a loose uPVC hand. First, you'll need to close your window and do a test fit. The corner joints of the sash must be aligned with the casing joint. If it does not then you can use the screwdriver to loosen the handle. Then, turn the mechanism into position.
3. Water Leaks
It is crucial to take action if get up each morning to discover mouldy walls and wet floors. Windows that leak water do not only lead to the degrading of the structure of your home but also hamper your efforts to regulate the temperature in your home. Most often, uPVC window leaks are caused by damaged or missing sealant.
This is an easy fix that can be completed by any DIYer who has the ability. Based on the severity of the issue the old caulking may need to be removed before a fresh layer can be applied. When it comes to
uPVC repair, it is important to avoid 'over-caulking'. This will only make your window harder to clean and lower its energy efficiency.
It is important to check that any drainage holes are free of debris and that the sill pan is placed correctly so that it drains away from the window. In more serious instances, you might need to consider replacing the window.
Moldy sills and rotten ones are another sign of water leakage. This fungus thrives under damp conditions and can spread quickly throughout the house.
If the leakage occurs between the double-glazed glass it is more likely that the issue is more with the seal rather than the frame. A uPVC specialist can fix this issue by replacing the glass seal. This will ensure the complete insulation of your windows.
4. Faulty Hinges
If your uPVC windows are brittle to open, or loose and blow open with a breeze, it may be hinges at the fault. They can be replaced by any competent DIYer and can be done within a few minutes.
Like all mechanical parts, hinges can wear out over time. It's easy to change the hinges on a window however it is simpler if you have someone to help hold the frame.
Make sure that the uPVC hinges open and close in the right direction. You can do this by checking for the arrows on each hinge. This shows which way the window should open.
The problem can be caused either by opening the window incorrectly or due to a poor installation in the factory. Sending us photos via our website will often resolve the problem. We are always happy to offer advice.
It is also important to lubricate the hinges regularly. This can be accomplished by applying a light engineering oil on the hinges, we recommend using a solvent-free lubricant such as the 3-in-one Multi-Purpose oil. Regularly lubrication will help the window open and close more easily. It can also reduce the risk of a window getting stuck and stop corrosion. This should be done at least every year. WD40 and other solvent based fluids are not recommended since they can damage the parts of your uPVC window.
5. Draughts
Draughts in windows made of upvc can be caused by a variety of various factors. The hinges may also become unbalanced due to wear, causing a gap where the sash meets frame. These can be easily fixed by giving them a good cleaning, but if they are beyond repair it could be necessary to get them realigned or replaced. The second is the interlock, which is located on the hinge side of the window, can also be misaligned, and again it is possible to just give them a good clean, but in some cases it might be necessary to get them replaced.
The next most common cause of draughts is the window seals, these are susceptible to being worn out or damaged over time, and let air escape through the gaps. Installing high-quality weatherstripping is a good way to prevent draughts. Replace the upvc windows with low-emissivity lenses. This will help to regulate indoor temperatures, and reduce the risk of draughts.
One of the most effective methods to reduce drafts is to use a draught excluder, these are usually fabric tubes filled with some kind of filler. They can be placed on the top of your windowsill. They will help keep cold air out and keep your home warm and cosy!
With a little maintenance and repair, your upvc windows will provide a great level of insulation and security for your home. However, it is important to realize that windows last for a certain period of time and eventually, they will reach an point at which it is more economical to replace them than fix them. So, if you are having issues with your
upvc repairs near me windows, it's recommended to seek assistance from a professional as soon as you can.