Why You Should Leave Double Glazing Window Repair to the Experts
A double-glazed window that's not functioning properly can lead to draughts and condensation, and also affect the security of your house. It is recommended to leave the repair or
glaze replacement to professionals.
Misting is among the most frequently observed signs that the seal between your windows has broken. This could be a costly issue that should be addressed quickly.
Chips or cracks in panes
Cracked or chipped glass isn't just an eyesore, it can allow air to enter and cause your cooling and
glaze heating bills to rise. If the double pane glass is cracked or damaged, window manufacturers recommend replacing it to maintain an effective seal and keep your home dry and warm.
It's not as costly or complicated as it might appear to fix a broken glass. You must act quickly. Cracks in windows tend to get worse as time passes, resulting in energy leaks. You'll want to do the work as quickly as possible to prevent further issues.
A small crack can develop into a web of cracks which will render your double-pane windows unusable, which is why it's vital to take the appropriate steps to repair it before it gets out of control.
One quick and easy way to repair a crack is to use masking tape or duct tap. Typically just a single strip of tape on both sides of the crack will suffice for superficial cracks such as stress cracks caused by variations in temperature, but deeper cracks may require you extend the tape beyond the crack edges on both sides.
You can also try a clear glass adhesive such as Loctite, Gorilla Glue or a similar product that was designed specifically for windows. This type of adhesive is similar to nail varnish in that it fills the crack and stops it from getting worse. It also seals the crack so that outside air cannot pass through. This type of glue is different from nail polish in that it is more durable, won't peel or flake off and isn't as hard.
If you are looking for an interim solution then cut a piece plastic from a plastic shower curtain or tarp that is large enough to cover a hole or crack. Then, attach the plastic cover to your window using masking tape or duct tape, and let it dry. This will block from rain, wind or insects while you are waiting for your new double-paned window to arrive.
Apply a two-part epoxy on the cracked part of your window for a permanent solution. This type of putty will close the crack and
Glaze be painted to blend with your window frame.
Condensation
Condensation is mostly in between window panes. It can lead to the growth of mold and other issues. It can also lead to the loss of heat through your windows, making it essential to address it swiftly. It happens when warm, moisture heavy air comes into contact with a cool object and the water vapor in the air condenses onto the cooler surface. You can learn more about condensation here. You can learn more about condensation here.
Broken Locks or Handles
Although rare, sometimes
double glazing window handles break. This can be very frustrating and expose your home to burglars who could be able open the handle easily to unlock the windows. Fortunately, replacing a damaged window handle is fairly easy and affordable if you know what to look for.
The mechanism to open a uPVC window sash is made up of three components comprising the handle, gearbox and drive gear. The handle is the one that operates the gearbox which in turn controls the drive gear that allows the window to be opened and closed. The gearbox will become jammed when the handle is broken. This can be due to a number of reasons, such as broken spindles in the handle itself or caused by wear and tear and is simply worn down.
You will need to replace the lock if broken. To accomplish this, you'll need to find the fixing screws or pins that hold it in place and are usually found on the inside face of the handle. After you have removed the handle and putting into the new one and secure with the pins or screws. Make sure you align the handle properly with the frame when installing it. It is also important to put the screws over any screws that are exposed because this will help keep them out of view.
If uPVC window seals are not properly sealed they could let in cold air as well as heat, causing water damage and damp. It is also crucial that windows made of uPVC are not left open as this can be an invitation for burglars to break in.
If your uPVC window is not closing properly, you'll be required to contact the installer or an expert tradesman in your area for assistance. They'll be able to check the problem and advise you on the best way to proceed to repair the issue. They are able to provide a full range of double glazing repairs and services, which includes installing new locks, hinges or handles if needed.
Dropping Panes
Double-pane windows are a wise investment for your home. They can add value to your home and offer insulation. However, there are a few issues that can arise from your new window and you must know when to take action.
If your windows are damaged by cracks or damaged glass, it's time to replace the windows. These damages could allow air from outside into your home and make it difficult for the cooling system to keep up with your home's temperature. This can make your system work harder than necessary, increasing your energy bill.
Fogging between the panes of glass is also an indication that your windows need replacing. This is because the inert gas that is sandwiched between the glass has gone out. When this happens, the seal will need to be replaced, which cannot be done separately.
As time passes, the rubber seals in your windows can start to degrade. This could be due exposure to sunlight, aging and harsh cleaning products. As the seals break down they reduce their ability to insulate your home.
You should contact a professional to replace windows that are cracked or chipped. Do not attempt to replace the window yourself because it can be dangerous to handle broken glass. They will have all the tools necessary to safely remove and replace the broken glass.
Repairing a double-glazed window by replacing the inner or outer pane. Depending on the type of window you have, this may be more expensive than replacing the single pane. However, if you want to save money on energy and increase the efficiency of your double-glazed window this is the ideal alternative.
It is essential to keep in mind that the frame of your double-glazed window may also require replacement. When the double pane of glass is replaced, it is found that the frames are dated and need to be replaced. A professional glass specialist can assist you in finding the ideal double-glazed window for your home.